view tests/test-mq-qfold.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [mq]
  > git = keep
  > [diff]
  > nodates = 1
  > EOF

init:

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg qnew -f p1
  $ echo b >> a
  $ hg qnew -f p2
  $ echo c >> a
  $ hg qnew -f p3

Fold in the middle of the queue:
(this tests also that editor is not invoked if '--edit' is not
specified)

  $ hg qpop p1
  popping p3
  popping p2
  now at: p1

  $ hg qdiff
  diff -r 07f494440405 a
  --- a/a
  +++ b/a
  @@ -1,1 +1,2 @@
   a
  +a

  $ HGEDITOR=cat hg qfold p2
  $ grep git .hg/patches/p1 && echo 'git patch found!'
  [1]

  $ hg qser
  p1
  p3

  $ hg qdiff
  diff -r 07f494440405 a
  --- a/a
  +++ b/a
  @@ -1,1 +1,3 @@
   a
  +a
  +b

Fold with local changes:

  $ echo d >> a
  $ hg qfold p3
  abort: local changes found, refresh first
  [255]

  $ hg diff -c .
  diff -r 07f494440405 -r ???????????? a (glob)
  --- a/a
  +++ b/a
  @@ -1,1 +1,3 @@
   a
  +a
  +b

  $ hg revert -a --no-backup
  reverting a

Fold git patch into a regular patch, expect git patch:

  $ echo a >> a
  $ hg qnew -f regular
  $ hg cp a aa
  $ hg qnew --git -f git

  $ hg qpop
  popping git
  now at: regular

  $ hg qfold git

  $ cat .hg/patches/regular
  # HG changeset patch
  # Parent  ???????????????????????????????????????? (glob)
  
  diff --git a/a b/a
  --- a/a
  +++ b/a
  @@ -1,3 +1,4 @@
   a
   a
   b
  +a
  diff --git a/a b/aa
  copy from a
  copy to aa
  --- a/a
  +++ b/aa
  @@ -1,3 +1,4 @@
   a
   a
   b
  +a

  $ hg qpop
  popping regular
  now at: p1

  $ hg qdel regular

Fold regular patch into a git patch, expect git patch:

  $ hg cp a aa
  $ hg qnew --git -f git
  $ echo b >> aa
  $ hg qnew -f regular

  $ hg qpop
  popping regular
  now at: git

  $ hg qfold regular

  $ cat .hg/patches/git
  # HG changeset patch
  # Parent  ???????????????????????????????????????? (glob)
  
  diff --git a/a b/aa
  copy from a
  copy to aa
  --- a/a
  +++ b/aa
  @@ -1,3 +1,4 @@
   a
   a
   b
  +b

Test saving last-message.txt:

  $ hg qrefresh -m "original message"

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import util
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise util.Abort('emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > (echo; echo "test saving last-message.txt") >> \$1
  > EOF

  $ hg qapplied
  p1
  git
  $ hg tip --template "{files}\n"
  aa

(test that editor is not invoked before transaction starting,
and that combination of '--edit' and '--message' doesn't abort execution)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qfold -e -m MESSAGE p3
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(reset applied patches and directory status)

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs after editor invocation
  > commitfailure = !
  > EOF

  $ hg qapplied
  p1
  $ hg status -A aa
  ? aa
  $ rm aa
  $ hg status -m
  M a
  $ hg revert --no-backup -q a
  $ hg qpush -q git
  now at: git

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qfold -e p3
  ==== before editing
  original message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added aa
  HG: changed a
  ====
  transaction abort!
  rollback completed
  note: commit message saved in .hg/last-message.txt
  refresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  original message
  
  
  
  test saving last-message.txt

(confirm whether files listed up in the commit message editing are correct)

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.unexpectedabort =
  > EOF
  $ hg status -u | while read f; do rm ${f}; done
  $ hg revert --no-backup -q --all
  $ hg qpush -q git
  now at: git
  $ hg qpush -q --move p3
  now at: p3

  $ hg status --rev "git^1" --rev . -arm
  M a
  A aa

  $ cd ..