view tests/test-mq-safety.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'hgext.mq =' >> $HGRCPATH

  $ hg init repo
  $ cd repo

  $ echo foo > foo
  $ hg ci -qAm 'add a file'

  $ hg qinit

  $ hg qnew foo
  $ echo foo >> foo
  $ hg qrefresh -m 'append foo'

  $ hg qnew bar
  $ echo bar >> foo
  $ hg qrefresh -m 'append bar'

Try to operate on public mq changeset

  $ hg qpop
  popping bar
  now at: foo
  $ hg phase --public qbase
  $ echo babar >> foo
  $ hg qref
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo
  $ hg qpop
  abort: popping would remove an immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg qfold bar
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo

restore state for remaining test

  $ hg qpush
  applying bar
  now at: bar

try to commit on top of a patch

  $ echo quux >> foo
  $ hg ci -m 'append quux'
  abort: cannot commit over an applied mq patch
  [255]


cheat a bit...

  $ mv .hg/patches .hg/patches2
  $ hg ci -m 'append quux'
  $ mv .hg/patches2 .hg/patches


qpop/qrefresh on the wrong revision

  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qpop -n patches
  using patch queue: $TESTTMP/repo/.hg/patches (glob)
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: working directory revision is not qtip
  [255]

  $ hg up -C qtip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: cannot refresh a revision with children
  [255]
  $ hg tip --template '{rev} {desc}\n'
  3 append quux


qpush warning branchheads

  $ cd ..
  $ hg init branchy
  $ cd branchy
  $ echo q > q
  $ hg add q
  $ hg qnew -f qp
  $ hg qpop
  popping qp
  patch queue now empty
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo c > c
  $ hg ci -Amc
  adding c
  $ hg merge default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mmerge
  $ hg up default
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg log
  changeset:   2:65309210bf4e
  branch:      b
  tag:         tip
  parent:      1:707adb4c8ae1
  parent:      0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     merge
  
  changeset:   1:707adb4c8ae1
  branch:      b
  parent:      -1:000000000000
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     c
  
  changeset:   0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     a
  
  $ hg qpush
  applying qp
  now at: qp

Testing applied patches, push and --force

  $ cd ..
  $ hg init forcepush
  $ cd forcepush
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg ci -m changea
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > b
  $ hg ci -Am addb
  adding b
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd .. clone -r 0 forcepush forcepush2
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a >> a
  $ hg qnew patch

Pushing applied patch with --rev without --force

  $ hg push -r . ../forcepush2
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing applied patch with branchhash, without --force

  $ hg push ../forcepush2#default
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing revs excluding applied patch

  $ hg push --new-branch -r 'branch(branch)' -r 2 ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

Pushing applied patch with --force

  $ hg phase --force --secret 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  no changes found (ignored 1 secret changesets)
  [1]
  $ hg phase --draft 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

  $ cd ..