view tests/test-mq-subrepo.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > commitsubrepos = Yes
  > [extensions]
  > mq =
  > record =
  > [diff]
  > nodates = 1
  > EOF

  $ stdin=`pwd`/stdin.tmp

fn to create new repository w/dirty subrepo, and cd into it
  $ mkrepo() {
  >     hg init $1
  >     cd $1
  >     hg qinit
  > }

fn to create dirty subrepo
  $ mksubrepo() {
  >     hg init $1
  >     cd $1
  >     echo a > a
  >     hg add
  >     cd ..
  > }

  $ testadd() {
  >     cat - > "$stdin"
  >     mksubrepo sub
  >     echo sub = sub >> .hgsub
  >     hg add .hgsub
  >     echo % abort when adding .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub ci -m0sub
  >     echo % update substate when adding .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testmod() {
  >     cat - > "$stdin"
  >     mksubrepo sub2
  >     echo sub2 = sub2 >> .hgsub
  >     echo % abort when modifying .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub2 ci -m0sub2
  >     echo % update substate when modifying .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testrm1() {
  >     cat - > "$stdin"
  >     mksubrepo sub3
  >     echo sub3 = sub3 >> .hgsub
  >     hg ci -Aqmsub3
  >     $EXTRA
  >     echo b >> sub3/a
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }

  $ testrm2() {
  >     cat - > "$stdin"
  >     mksubrepo sub4
  >     echo sub4 = sub4 >> .hgsub
  >     hg ci -Aqmsub4
  >     $EXTRA
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }


handle subrepos safely on qnew

  $ mkrepo repo-2499-qnew
  $ testadd qnew -X path:no-effect -m0 0.diff
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qnew -X path:no-effect -m0 0.diff
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qnew -X path:no-effect -m0 0.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qnew -m2 2.diff
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qnew -m2 2.diff
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qnew -m3 3.diff
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qnew -m3 3.diff
  % debugsub should be empty

  $ cd ..


handle subrepos safely on qrefresh

  $ mkrepo repo-2499-qrefresh
  $ hg qnew -m0 0.diff
  $ testadd qrefresh
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrefresh
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ hg qnew -m1 1.diff
  $ testmod qrefresh
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrefresh
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m2 2.diff'
  $ testrm1 qrefresh
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrefresh
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m3 3.diff'
  $ testrm2 qrefresh
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrefresh
  % debugsub should be empty
  $ EXTRA=

  $ cd ..


handle subrepos safely on qpush/qpop
(and we cannot qpop / qpush with a modified subrepo)

  $ mkrepo repo-2499-qpush
  $ mksubrepo sub
  adding a
  $ hg -R sub ci -m0sub
  $ echo sub = sub > .hgsub
  $ hg add .hgsub
  $ hg commit -m0
  $ hg debugsub
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  $ echo foo > ./sub/a
  $ hg -R sub commit -m foo
  $ hg commit -m1
  $ hg qimport -r "0:tip"
  $ hg -R sub id --id
  aa037b301eba

qpop
  $ hg -R sub update 0000
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg qpop
  abort: local changed subrepos found, refresh first
  [255]
  $ hg revert sub
  reverting subrepo sub
  adding sub/a (glob)
  $ hg qpop
  popping 1.diff
  now at: 0.diff
  $ hg status -AS
  C .hgsub
  C .hgsubstate
  C sub/a
  $ hg -R sub id --id
  b2fdb12cd82b

qpush
  $ hg -R sub update 0000
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg qpush
  abort: local changed subrepos found, refresh first
  [255]
  $ hg revert sub
  reverting subrepo sub
  adding sub/a (glob)
  $ hg qpush
  applying 1.diff
   subrepository sub diverged (local revision: b2fdb12cd82b, remote revision: aa037b301eba)
  (M)erge, keep (l)ocal or keep (r)emote? m
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  now at: 1.diff
  $ hg status -AS
  C .hgsub
  C .hgsubstate
  C sub/a
  $ hg -R sub id --id
  aa037b301eba

  $ cd ..


handle subrepos safely on qrecord

  $ mkrepo repo-2499-qrecord
  $ testadd qrecord --config ui.interactive=1 -m0 0.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qrecord --config ui.interactive=1 -m1 1.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] y
  
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] y
  
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qrecord --config ui.interactive=1 -m2 2.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrecord --config ui.interactive=1 -m2 2.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qrecord --config ui.interactive=1 -m3 3.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrecord --config ui.interactive=1 -m3 3.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] y
  
  % debugsub should be empty

  $ cd ..


correctly handle subrepos with patch queues
  $ mkrepo repo-subrepo-with-queue
  $ mksubrepo sub
  adding a
  $ hg -R sub qnew sub0.diff
  $ echo sub = sub >> .hgsub
  $ hg add .hgsub
  $ hg qnew 0.diff

  $ cd ..

check whether MQ operations can import updated .hgsubstate correctly
both into 'revision' and 'patch file under .hg/patches':

  $ hg init importing-hgsubstate
  $ cd importing-hgsubstate

  $ echo a > a
  $ hg commit -u test -d '0 0' -Am '#0 in parent'
  adding a
  $ hg init sub
  $ echo sa > sub/sa
  $ hg -R sub commit -u test -d '0 0' -Am '#0 in sub'
  adding sa
  $ echo 'sub = sub' > .hgsub
  $ touch .hgsubstate
  $ hg add .hgsub .hgsubstate

  $ hg qnew -u test -d '0 0' import-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hgsubstate
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg diff -c tip
  diff -r f499373e340c -r f69e96d86e75 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r f69e96d86e75 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hg/patches/import-at-qnew
  # HG changeset patch
  # User test
  # Date 0 0
  # Parent  f499373e340cdca5d01dee904aeb42dd2a325e71
  
  diff -r f499373e340c -r f69e96d86e75 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r f69e96d86e75 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg parents --template '{node}\n'
  f69e96d86e75a6d4fd88285dc9697acb23951041
  $ hg parents --template '{files}\n'
  .hgsub .hgsubstate

check also whether qnew not including ".hgsubstate" explicitly causes
as same result (in node hash) as one including it.

  $ hg qpop -a -q
  patch queue now empty
  $ hg qdelete import-at-qnew
  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub
  $ rm -f .hgsubstate
  $ hg qnew -u test -d '0 0' import-at-qnew
  $ hg parents --template '{node}\n'
  f69e96d86e75a6d4fd88285dc9697acb23951041
  $ hg parents --template '{files}\n'
  .hgsub .hgsubstate

check whether qrefresh imports updated .hgsubstate correctly

  $ hg qpop
  popping import-at-qnew
  patch queue now empty
  $ hg qpush
  applying import-at-qnew
  now at: import-at-qnew
  $ hg parents --template '{files}\n'
  .hgsub .hgsubstate

  $ hg qnew import-at-qrefresh
  $ echo sb > sub/sb
  $ hg -R sub commit -u test -d '0 0' -Am '#1 in sub'
  adding sb
  $ hg qrefresh -u test -d '0 0'
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 05b056bb9c8c -r d987bec230f4 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # User test
  # Date 0 0
  # Parent  05b056bb9c8c05ff15258b84fd42ab3527271033
  
  diff -r 05b056bb9c8c .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg parents --template '{files}\n'
  .hgsubstate

  $ hg qrefresh -u test -d '0 0'
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 05b056bb9c8c -r d987bec230f4 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # User test
  # Date 0 0
  # Parent  05b056bb9c8c05ff15258b84fd42ab3527271033
  
  diff -r 05b056bb9c8c .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg parents --template '{files}\n'
  .hgsubstate

  $ hg update -C tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop -a
  popping import-at-qrefresh
  popping import-at-qnew
  patch queue now empty

  $ hg -R sub update -C 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'sub = sub' > .hgsub
  $ hg commit -Am '#1 in parent'
  adding .hgsub
  $ hg -R sub update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit -Am '#2 in parent (but will be rolled back soon)'
  $ hg rollback
  repository tip rolled back to revision 1 (undo commit)
  working directory now based on revision 1
  $ hg status
  M .hgsubstate
  $ hg qnew -u test -d '0 0' checkstate-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/checkstate-at-qnew
  # HG changeset patch
  # User test
  # Date 0 0
  # Parent  4d91eb2fa1d1b22ec513347b9cd06f6b49d470fa
  
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg parents --template '{files}\n'
  .hgsubstate

check whether qrefresh not including ".hgsubstate" explicitly causes
as same result (in node hash) as one including it.

  $ hg update -C -q 0
  $ hg qpop -a -q
  patch queue now empty
  $ hg qnew -u test -d '0 0' add-hgsub-at-qrefresh
  $ echo 'sub = sub' > .hgsub
  $ echo > .hgsubstate
  $ hg add .hgsub .hgsubstate
  $ hg qrefresh -u test -d '0 0'
  $ hg parents --template '{node}\n'
  7c48c35501aae6770ed9c2517014628615821a8e
  $ hg parents --template '{files}\n'
  .hgsub .hgsubstate

  $ hg qpop -a -q
  patch queue now empty
  $ hg qdelete add-hgsub-at-qrefresh
  $ hg qnew -u test -d '0 0' add-hgsub-at-qrefresh
  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub
  $ rm -f .hgsubstate
  $ hg qrefresh -u test -d '0 0'
  $ hg parents --template '{node}\n'
  7c48c35501aae6770ed9c2517014628615821a8e
  $ hg parents --template '{files}\n'
  .hgsub .hgsubstate

  $ cd ..

  $ cd ..