view tests/test-exchange-obsmarkers-case-B3.t @ 40021:c537144fdbef

wireprotov2: support response caching

One of the things I've learned from managing VCS servers over the
years is that they are hard to scale. It is well known that some
companies have very beefy (read: very expensive) servers to power
their VCS needs. It is also known that specialized servers for
various VCS exist in order to facilitate scaling servers. (Mercurial
is in this boat.)

One of the aspects that make a VCS server hard to scale is the
high CPU load incurred by constant client clone/pull operations.

To alleviate the scaling pain associated with data retrieval
operations, I want to integrate caching into the Mercurial wire
protocol server as robustly as possible such that servers can
aggressively cache responses and defer as much server load as
possible.

This commit represents the initial implementation of a general
caching layer in wire protocol version 2.

We define a new interface and behavior for a wire protocol cacher
in repository.py. (This is probably where a reviewer should look
first to understand what is going on.)

The bulk of the added code is in wireprotov2server.py, where we
define how a command can opt in to being cached and integrate
caching into command dispatching.

From a very high-level:

* A command can declare itself as cacheable by providing a callable
  that can be used to derive a cache key.
* At dispatch time, if a command is cacheable, we attempt to
  construct a cacher and use it for serving the request and/or
  caching the request.
* The dispatch layer handles the bulk of the business logic for
  caching, making cachers mostly "dumb content stores."
* The mechanism for invalidating cached entries (one of the harder
  parts about caching in general) is by varying the cache key when
  state changes. As such, cachers don't need to be concerned with
  cache invalidation.

Initially, we've hooked up support for caching "manifestdata" and
"filedata" commands. These are the simplest to cache, as they should
be immutable over time. Caching of commands related to changeset
data is a bit harder (because cache validation is impacted by
changes to bookmarks, phases, etc). This will be implemented later.
(Strictly speaking, censoring a file should invalidate caches. I've
added an inline TODO to track this edge case.)

To prove it works, this commit implements a test-only extension
providing in-memory caching backed by an lrucachedict. A new test
showing this extension behaving properly is added. FWIW, the
cacher is ~50 lines of code, demonstrating the relative ease with
which a cache can be added to a server.

While the test cacher is not suitable for production workloads, just
for kicks I performed a clone of just the changeset and manifest data
for the mozilla-unified repository. With a fully warmed cache (of just
the manifest data since changeset data is not cached), server-side
CPU usage dropped from ~73s to ~28s. That's pretty significant and
demonstrates the potential that response caching has on server
scalability!

Differential Revision: https://phab.mercurial-scm.org/D4773

============================================
Testing obsolescence markers push: Cases B.3
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 3: Pruned changeset on non-pushed part of the history

B.3 Pruned changeset on non-pushed part of the history
======================================================

.. {{{
..   ⊗ C
..   |
..   ○ B
..   | ◔ A
..   |/
..   ● O
.. }}}
..
.. Marker exists from:
..
..  * C (prune)
..
.. Commands run:
..
..  * hg push -r A
..
.. Expected exchange:
..
..  * ø
..
.. Expected exclude:
..
..  * chain from B

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos B.3
  creating test repo for test case B.3
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg up --quiet 0
  $ mkcommit B
  created new head
  $ mkcommit C
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  e56289ab6378 (draft): C
  |
  @  35b183996678 (draft): B
  |
  | o  f5bc6836db60 (draft): A
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  e56289ab6378dc752fd7965f8bf66b58bda740bd 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-----------------------------------

  $ dotest B.3 A
  ## Running testcase B.3
  # testing echange of "A" (f5bc6836db60)
  ## initial state
  # obstore: main
  e56289ab6378dc752fd7965f8bf66b58bda740bd 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  ## post push state
  # obstore: main
  e56289ab6378dc752fd7965f8bf66b58bda740bd 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pulling "f5bc6836db60" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets f5bc6836db60 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  e56289ab6378dc752fd7965f8bf66b58bda740bd 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest