view tests/test-contrib-testparseutil.t @ 49275:c6a3243567b6

chg: replace mercurial.util.recvfds() by simpler pure Python implementation

On Python 3, we have socket.socket.recvmsg(). This makes it possible to receive
FDs in pure Python code. The new code behaves like the previous
implementations, except that it’s more strict about the format of the ancillary
data. This works because we know in which format the FDs are passed.

Because the code is (and always has been) specific to chg (payload is 1 byte,
number of passed FDs is limited) and we now have only one implementation and
the code is very short, I decided to stop exposing a function in
mercurial.util.

Note on terminology: The SCM_RIGHTS mechanism is used to share open file
descriptions to another process over a socket. The sending side passes an array
of file descriptors and the receiving side receives an array of file
descriptors. The file descriptors are different in general on both sides but
refer to the same open file descriptions. The two terms are often conflated,
even in the official documentation. That’s why I used “FD” above, which could
mean both “file descriptor” and “file description”.

  $ testparseutil="$TESTDIR"/../contrib/testparseutil.py

Internal test by doctest

  $ "$PYTHON" -m doctest "$testparseutil"

Tests for embedded python script

Typical cases

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF
  >   >>> for f in [1, 2, 3]:
  >   ...     foo = 1
  >   >>> foo = 2
  >   $ echo "doctest is terminated by command, empty line, or comment"
  >   >>> foo = 31
  >   expected output of doctest fragment
  >   >>> foo = 32
  >   
  >   >>> foo = 33
  > 
  >   >>> foo = 34
  > comment
  >   >>> foo = 35
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 4
  >   > 
  >   > EOF
  >   $ cat > foo.py <<EOF
  >   > foo = 5
  >   > EOF
  >   $ cat >> foo.py <<EOF
  >   > foo = 6 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ "\$PYTHON" <<NO_CHECK_EOF
  >   > foo = 7 # this should be ignored at detection
  >   > NO_CHECK_EOF
  >   $ cat > foo.py <<NO_CHECK_EOF
  >   > foo = 8 # this should be ignored at detection
  >   > NO_CHECK_EOF
  > 
  > doctest fragment ended by EOF
  > 
  >   >>> foo = 9
  > NO_CHECK_EOF
  <stdin>:1: <anonymous> starts
    |for f in [1, 2, 3]:
    |    foo = 1
    |foo = 2
  <stdin>:4: <anonymous> ends
  <stdin>:5: <anonymous> starts
    |foo = 31
    |
    |foo = 32
    |
    |foo = 33
  <stdin>:10: <anonymous> ends
  <stdin>:11: <anonymous> starts
    |foo = 34
  <stdin>:12: <anonymous> ends
  <stdin>:13: <anonymous> starts
    |foo = 35
  <stdin>:14: <anonymous> ends
  <stdin>:16: <anonymous> starts
    |foo = 4
    |
  <stdin>:18: <anonymous> ends
  <stdin>:20: foo.py starts
    |foo = 5
  <stdin>:21: foo.py ends
  <stdin>:23: foo.py starts
    |foo = 6 # appended
  <stdin>:24: foo.py ends
  <stdin>:38: <anonymous> starts
    |foo = 9
  <stdin>:39: <anonymous> ends

Invalid test script

(similar test for shell script and hgrc configuration is omitted,
because this tests common base class of them)

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF > detected
  >   $ "\$PYTHON" <<EOF
  >   > foo = 1
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 2
  >   $ cat > bar.py <<EOF
  >   > bar = 2 # this fragment will be detected as expected
  >   > EOF
  > 
  >   $ cat > foo.py <<EOF
  >   > foo = 3
  > NO_CHECK_EOF
  <stdin>:3: unexpected line for "heredoc python invocation"
  <stdin>:6: unexpected line for "heredoc python invocation"
  <stdin>:11: unexpected end of file for "heredoc .py file"
  [1]
  $ cat detected
  <stdin>:7: bar.py starts
    |bar = 2 # this fragment will be detected as expected
  <stdin>:8: bar.py ends

Tests for embedded shell script

  $ "$PYTHON" "$testparseutil" -v shembedded <<NO_CHECK_EOF
  >   $ cat > foo.sh <<EOF
  >   > foo = 1
  >   > 
  >   > foo = 2
  >   > EOF
  >   $ cat >> foo.sh <<EOF
  >   > foo = 3 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > foo.sh <<NO_CHECK_EOF
  >   > # this should be ignored at detection
  >   > foo = 4
  >   > NO_CHECK_EOF
  > 
  > NO_CHECK_EOF
  <stdin>:2: foo.sh starts
    |foo = 1
    |
    |foo = 2
  <stdin>:5: foo.sh ends
  <stdin>:7: foo.sh starts
    |foo = 3 # appended
  <stdin>:8: foo.sh ends

Tests for embedded hgrc configuration

  $ "$PYTHON" "$testparseutil" -v hgrcembedded <<NO_CHECK_EOF
  >   $ cat > .hg/hgrc <<EOF
  >   > [ui]
  >   > verbose = true
  >   > 
  >   > # end of local configuration
  >   > EOF
  > 
  >   $ cat > \$HGRCPATH <<EOF
  >   > [extensions]
  >   > rebase =
  >   > # end of global configuration
  >   > EOF
  > 
  >   $ cat >> \$HGRCPATH <<EOF
  >   > # appended
  >   > [extensions]
  >   > rebase =!
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > .hg/hgrc <<NO_CHECK_EOF
  >   > # this local configuration should be ignored at detection
  >   > [ui]
  >   > username = foo bar
  >   > NO_CHECK_EOF
  > 
  >   $ cat > \$HGRCPATH <<NO_CHECK_EOF
  >   > # this global configuration should be ignored at detection
  >   > [extensions]
  >   > foobar =
  >   > NO_CHECK_EOF
  > NO_CHECK_EOF
  <stdin>:2: .hg/hgrc starts
    |[ui]
    |verbose = true
    |
    |# end of local configuration
  <stdin>:6: .hg/hgrc ends
  <stdin>:9: $HGRCPATH starts
    |[extensions]
    |rebase =
    |# end of global configuration
  <stdin>:12: $HGRCPATH ends
  <stdin>:15: $HGRCPATH starts
    |# appended
    |[extensions]
    |rebase =!
  <stdin>:18: $HGRCPATH ends