view tests/test-install.t @ 32009:c6cb21ddf74a

checkheads: upgrade the obsolescence postprocessing logic (issue4354)

The previous logic had many shortcoming (eg: looking at the head only, not
handling prune, etc...), the new logic use a more robust approach:

For each head, we check if after the push all changesets exclusive to this heads
will be obsolete. If they are, the branch considered be "replaced".

To check if a changeset will be obsolete, we simply checks:

* the changeset phase

* the existence of a marker relevant to the "pushed set" that affects the
  changesets..

This fixes two major issues of the previous algorithm:

* branch partially rewritten (eg: head but not root) are no longer detected as
  replaced,

* Prune are now properly handled.

(This implementation was introduction in the evolve extension, version 6.0.0.)

This new algorithm has an extended number of tests, a basic one is provided
in this patch. The others will be introduced in their own changeset for clarity.

In addition, we stop trying to process heads unknown locally, we do not have
enough data to take an informed decision so we should stop pretending we do.
This reflect a test that is now update.

hg debuginstall
  $ hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

hg debuginstall JSON
  $ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesserver": [*"zlib"*], (glob)
    "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
    "defaulttemplateerror": null,
    "defaulttemplatenotfound": "default",
    "editor": "* -c \"import sys; sys.exit(0)\"", (glob)
    "editornotfound": false,
    "encoding": "ascii",
    "encodingerror": null,
    "extensionserror": null,
    "hgmodulepolicy": "*", (glob)
    "hgmodules": "*mercurial", (glob)
    "hgver": "*", (glob)
    "hgverextra": "*", (glob)
    "problems": 0,
    "pythonexe": "*", (glob)
    "pythonlib": "*", (glob)
    "pythonsecurity": [*], (glob)
    "pythonver": "*.*.*", (glob)
    "templatedirs": "*mercurial?templates", (glob)
    "username": "test",
    "usernameerror": null,
    "vinotfound": false
   }
  ]

hg debuginstall with no username
  $ HGUSER= hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username...
   no username supplied
   (specify a username in your configuration file)
  1 problems detected, please check your install!
  [1]

path variables are expanded (~ is the same as $TESTTMP)
  $ mkdir tools
  $ touch tools/testeditor.exe
#if execbit
  $ chmod 755 tools/testeditor.exe
#endif
  $ hg debuginstall --config ui.editor=~/tools/testeditor.exe
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

#if test-repo
  $ . "$TESTDIR/helpers-testrepo.sh"

  $ cat >> wixxml.py << EOF
  > import os, subprocess, sys
  > import xml.etree.ElementTree as ET
  > 
  > # MSYS mangles the path if it expands $TESTDIR
  > testdir = os.environ['TESTDIR']
  > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
  > 
  > def directory(node, relpath):
  >     '''generator of files in the xml node, rooted at relpath'''
  >     dirs = node.findall('./{%(wix)s}Directory' % ns)
  > 
  >     for d in dirs:
  >         for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
  >             yield subfile
  > 
  >     files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
  > 
  >     for f in files:
  >         yield relpath + f.attrib['Name']
  > 
  > def hgdirectory(relpath):
  >     '''generator of tracked files, rooted at relpath'''
  >     hgdir = "%s/../mercurial" % (testdir)
  >     args = ['hg', '--cwd', hgdir, 'files', relpath]
  >     proc = subprocess.Popen(args, stdout=subprocess.PIPE,
  >                             stderr=subprocess.PIPE)
  >     output = proc.communicate()[0]
  > 
  >     slash = '/'
  >     for line in output.splitlines():
  >         if os.name == 'nt':
  >             yield line.replace(os.sep, slash)
  >         else:
  >             yield line
  > 
  > tracked = [f for f in hgdirectory(sys.argv[1])]
  > 
  > xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1]))
  > root = xml.getroot()
  > dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
  > 
  > installed = [f for f in directory(dir, '')]
  > 
  > print('Not installed:')
  > for f in sorted(set(tracked) - set(installed)):
  >     print('  %s' % f)
  > 
  > print('Not tracked:')
  > for f in sorted(set(installed) - set(tracked)):
  >     print('  %s' % f)
  > EOF

  $ python wixxml.py help
  Not installed:
    help/common.txt
    help/hg-ssh.8.txt
    help/hg.1.txt
    help/hgignore.5.txt
    help/hgrc.5.txt
  Not tracked:

  $ python wixxml.py templates
  Not installed:
  Not tracked:

#endif