patch: refactor file creation/removal detection
The patcher has to know if a file is being created or removed to check if the
target already exists, or to actually unlink the file when a hunk emptying it
is applied. This was done by embedding the creation/removal information in the
first (and only) hunk attached to the file.
There are two problems with this approach:
- creation/removal is really a property of the file being patched and not its
hunk.
- for regular patches, file creation cannot be deduced at parsing time: there
are case where the *stripped* file paths must be compared. Modifying hunks
after their creation is clumsy and prevent further refactorings related to
copies handling.
Instead, we delegate this job to selectfile() which has all the relevant
information, and remove the hunk createfile() and rmfile() methods.
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ echo "record=" >> $HGRCPATH
$ echo "[diff]" >> $HGRCPATH
$ echo "nodates=1" >> $HGRCPATH
$ stdin=`pwd`/stdin.tmp
fn to create new repository w/dirty subrepo, and cd into it
$ mkrepo() {
> hg init $1
> cd $1
> hg qinit
> }
fn to create dirty subrepo
$ mksubrepo() {
> hg init $1
> cd $1
> echo a > a
> hg add
> cd ..
> }
$ testadd() {
> cat - > "$stdin"
> mksubrepo sub
> echo sub = sub >> .hgsub
> hg add .hgsub
> echo % abort when adding .hgsub w/dirty subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> echo [$?]
> hg -R sub ci -m0sub
> echo % update substate when adding .hgsub w/clean updated subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> hg debugsub
> }
$ testmod() {
> cat - > "$stdin"
> mksubrepo sub2
> echo sub2 = sub2 >> .hgsub
> echo % abort when modifying .hgsub w/dirty subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> echo [$?]
> hg -R sub2 ci -m0sub2
> echo % update substate when modifying .hgsub w/clean updated subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> hg debugsub
> }
$ testrm1() {
> cat - > "$stdin"
> mksubrepo sub3
> echo sub3 = sub3 >> .hgsub
> hg ci -Aqmsub3
> $EXTRA
> echo b >> sub3/a
> hg rm .hgsub
> echo % update substate when removing .hgsub w/dirty subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> echo % debugsub should be empty
> hg debugsub
> }
$ testrm2() {
> cat - > "$stdin"
> mksubrepo sub4
> echo sub4 = sub4 >> .hgsub
> hg ci -Aqmsub4
> $EXTRA
> hg rm .hgsub
> echo % update substate when removing .hgsub w/clean updated subrepo
> hg status -S
> echo '%' $*
> cat "$stdin" | hg $*
> echo % debugsub should be empty
> hg debugsub
> }
handle subrepos safely on qnew
$ mkrepo repo-2499-qnew
$ testadd qnew -m0 0.diff
adding a
% abort when adding .hgsub w/dirty subrepo
A .hgsub
A sub/a
% qnew -m0 0.diff
abort: uncommitted changes in subrepository sub
[255]
% update substate when adding .hgsub w/clean updated subrepo
A .hgsub
% qnew -m0 0.diff
committing subrepository sub
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
$ testmod qnew -m1 1.diff
adding a
% abort when modifying .hgsub w/dirty subrepo
M .hgsub
A sub2/a
% qnew -m1 1.diff
abort: uncommitted changes in subrepository sub2
[255]
% update substate when modifying .hgsub w/clean updated subrepo
M .hgsub
% qnew -m1 1.diff
committing subrepository sub2
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
path sub2
source sub2
revision 1f94c7611cc6b74f5a17b16121a1170d44776845
$ hg qpop -qa
patch queue now empty
$ testrm1 qnew -m2 2.diff
adding a
% update substate when removing .hgsub w/dirty subrepo
M sub3/a
R .hgsub
% qnew -m2 2.diff
% debugsub should be empty
$ hg qpop -qa
patch queue now empty
$ testrm2 qnew -m3 3.diff
adding a
% update substate when removing .hgsub w/clean updated subrepo
R .hgsub
% qnew -m3 3.diff
% debugsub should be empty
$ cd ..
handle subrepos safely on qrefresh
$ mkrepo repo-2499-qrefresh
$ hg qnew -m0 0.diff
$ testadd qrefresh
adding a
% abort when adding .hgsub w/dirty subrepo
A .hgsub
A sub/a
% qrefresh
abort: uncommitted changes in subrepository sub
[255]
% update substate when adding .hgsub w/clean updated subrepo
A .hgsub
% qrefresh
committing subrepository sub
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
$ hg qnew -m1 1.diff
$ testmod qrefresh
adding a
% abort when modifying .hgsub w/dirty subrepo
M .hgsub
A sub2/a
% qrefresh
abort: uncommitted changes in subrepository sub2
[255]
% update substate when modifying .hgsub w/clean updated subrepo
M .hgsub
% qrefresh
committing subrepository sub2
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
path sub2
source sub2
revision 1f94c7611cc6b74f5a17b16121a1170d44776845
$ hg qpop -qa
patch queue now empty
$ EXTRA='hg qnew -m2 2.diff'
$ testrm1 qrefresh
adding a
% update substate when removing .hgsub w/dirty subrepo
M sub3/a
R .hgsub
% qrefresh
% debugsub should be empty
$ hg qpop -qa
patch queue now empty
$ EXTRA='hg qnew -m3 3.diff'
$ testrm2 qrefresh
adding a
% update substate when removing .hgsub w/clean updated subrepo
R .hgsub
% qrefresh
% debugsub should be empty
$ EXTRA=
$ cd ..
handle subrepos safely on qpush/qpop
$ mkrepo repo-2499-qpush
$ mksubrepo sub
adding a
$ hg -R sub ci -m0sub
$ echo sub = sub > .hgsub
$ hg add .hgsub
$ hg qnew -m0 0.diff
committing subrepository sub
$ hg debugsub
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
qpop
$ hg qpop
popping 0.diff
patch queue now empty
$ hg status -AS
$ hg debugsub
qpush
$ hg qpush
applying 0.diff
now at: 0.diff
$ hg status -AS
C .hgsub
C .hgsubstate
C sub/a
$ hg debugsub
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
$ cd ..
handle subrepos safely on qrecord
$ mkrepo repo-2499-qrecord
$ testadd qrecord --config ui.interactive=1 -m0 0.diff <<EOF
> y
> y
> EOF
adding a
% abort when adding .hgsub w/dirty subrepo
A .hgsub
A sub/a
% qrecord --config ui.interactive=1 -m0 0.diff
diff --git a/.hgsub b/.hgsub
new file mode 100644
examine changes to '.hgsub'? [Ynsfdaq?]
abort: uncommitted changes in subrepository sub
[255]
% update substate when adding .hgsub w/clean updated subrepo
A .hgsub
% qrecord --config ui.interactive=1 -m0 0.diff
diff --git a/.hgsub b/.hgsub
new file mode 100644
examine changes to '.hgsub'? [Ynsfdaq?]
committing subrepository sub
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
$ testmod qrecord --config ui.interactive=1 -m1 1.diff <<EOF
> y
> y
> EOF
adding a
% abort when modifying .hgsub w/dirty subrepo
M .hgsub
A sub2/a
% qrecord --config ui.interactive=1 -m1 1.diff
diff --git a/.hgsub b/.hgsub
1 hunks, 1 lines changed
examine changes to '.hgsub'? [Ynsfdaq?]
@@ -1,1 +1,2 @@
sub = sub
+sub2 = sub2
record this change to '.hgsub'? [Ynsfdaq?]
abort: uncommitted changes in subrepository sub2
[255]
% update substate when modifying .hgsub w/clean updated subrepo
M .hgsub
% qrecord --config ui.interactive=1 -m1 1.diff
diff --git a/.hgsub b/.hgsub
1 hunks, 1 lines changed
examine changes to '.hgsub'? [Ynsfdaq?]
@@ -1,1 +1,2 @@
sub = sub
+sub2 = sub2
record this change to '.hgsub'? [Ynsfdaq?]
committing subrepository sub2
path sub
source sub
revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
path sub2
source sub2
revision 1f94c7611cc6b74f5a17b16121a1170d44776845
$ hg qpop -qa
patch queue now empty
$ testrm1 qrecord --config ui.interactive=1 -m2 2.diff <<EOF
> y
> y
> EOF
adding a
% update substate when removing .hgsub w/dirty subrepo
M sub3/a
R .hgsub
% qrecord --config ui.interactive=1 -m2 2.diff
diff --git a/.hgsub b/.hgsub
deleted file mode 100644
examine changes to '.hgsub'? [Ynsfdaq?]
% debugsub should be empty
$ hg qpop -qa
patch queue now empty
$ testrm2 qrecord --config ui.interactive=1 -m3 3.diff <<EOF
> y
> y
> EOF
adding a
% update substate when removing .hgsub w/clean updated subrepo
R .hgsub
% qrecord --config ui.interactive=1 -m3 3.diff
diff --git a/.hgsub b/.hgsub
deleted file mode 100644
examine changes to '.hgsub'? [Ynsfdaq?]
% debugsub should be empty
$ cd ..