view tests/test-exchange-obsmarkers-case-D4.t @ 39356:c8e4eae84808

narrow: add server logic to send cg while widening without ellipsis

Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.

The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.

This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.

Following things can definitely be improved in the logic this patch adds:

  1) Send just the filelogs and treemanifests
  2) Send the filelogs only for the additions in the include

I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.

This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.

The test changes demonstrate that the new implementation is correct and fixes
things.

Differential Revision: https://phab.mercurial-scm.org/D4383

============================================
Testing obsolescence markers push: Cases D.4
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category D: Partial Information Case
TestCase 4: Unknown changeset in between known changesets

D.4 Unknown changeset in between known one
==========================================

.. Mostly a clarification case
..
.. {{{
..   B ø⇠◌⇠○ B''
..     |   |
..   A ø⇠◌⇠◔ A'
..      \ /
..       ● O
..
.. }}}
..
.. Should be treated as A.3 case:
..
.. {{{
..
..   B ø⇠○ B''
..     | |
..   A ø⇠◔ A'
..     |/
..     ● O
..
.. }}}

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos D.4
  creating test repo for test case D.4
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ mkcommit B1
  $ hg debugobsolete `getid 'desc(A0)'` aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A1)'`
  $ hg debugobsolete `getid 'desc(B0)'` bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
  obsoleted 1 changesets
  $ hg debugobsolete bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb `getid 'desc(B1)'`
  $ hg log -G --hidden
  @  069b05c3876d (draft): B1
  |
  o  e5ea8f9c7314 (draft): A1
  |
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-----------

  $ dotest D.4 A1
  ## Running testcase D.4
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}