Mercurial > hg
view tests/test-http.t @ 39356:c8e4eae84808
narrow: add server logic to send cg while widening without ellipsis
Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.
The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.
This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.
Following things can definitely be improved in the logic this patch adds:
1) Send just the filelogs and treemanifests
2) Send the filelogs only for the additions in the include
I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.
This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.
The test changes demonstrate that the new implementation is correct and fixes
things.
Differential Revision: https://phab.mercurial-scm.org/D4383
author | Pulkit Goyal <pulkit@yandex-team.ru> |
---|---|
date | Sun, 26 Aug 2018 20:20:34 +0300 |
parents | 143efea71c2a |
children | f1186c292d03 |
line wrap: on
line source
#require serve $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at 'localhost:$HGPORT1': $EADDRINUSE$ [255] $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream #if no-reposimplestore $ hg clone --stream http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions #endif try to clone via stream, should use pull instead $ hg clone --stream http://localhost:$HGPORT1/ copy2 warning: stream clone requested but server has them disabled requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved try to clone via stream but missing requirements, so should use pull instead $ cat > $TESTTMP/removesupportedformat.py << EOF > from mercurial import localrepo > def extsetup(ui): > localrepo.localrepository.supportedformats.remove(b'generaldelta') > EOF $ hg clone --config extensions.rsf=$TESTTMP/removesupportedformat.py --stream http://localhost:$HGPORT/ copy3 warning: stream clone requested but client is missing requirements: generaldelta (see https://www.mercurial-scm.org/wiki/MissingRequirement for more information) requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files new changesets 8b6053c928fe:5fed3813f7f5 updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ cat >> .hg/hgrc <<EOF > [hooks] > changegroup = sh -c "printenv.py changegroup" > EOF $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 5fed3813f7f5 changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/ (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ cat << EOT > userpass.py > import base64 > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > auth = req.headers.get(b'Authorization') > if not auth: > raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, b'who', > [(b'WWW-Authenticate', b'Basic Realm="mercurial"')]) > if base64.b64decode(auth.split()[1]).split(b':', 1) != [b'user', b'pass']: > raise common.ErrorResponse(common.HTTP_FORBIDDEN, b'no') > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOT $ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \ > --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 #if no-reposimplestore $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved #endif --pull should override server's preferuncompressed $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files new changesets 8b6053c928fe:5fed3813f7f5 updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest-pull tag -r tip top $ hg -R dest-pull push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ hg -R dest-pull push http://user:pass@localhost:$HGPORT2/ --debug --config devel.debug.peer-request=yes pushing to http://user:***@localhost:$HGPORT2/ using http://localhost:$HGPORT2/ http auth: user user, password **** sending capabilities command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=capabilities http auth: user user, password **** devel-peer-request: finished in *.???? seconds (200) (glob) query 1; heads devel-peer-request: batched-content devel-peer-request: - heads (0 arguments) devel-peer-request: - known (1 arguments) sending batch command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=batch devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 68 bytes of commands arguments in headers devel-peer-request: finished in *.???? seconds (200) (glob) searching for changes all remote heads known locally preparing listkeys for "phases" sending listkeys command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=listkeys devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 16 bytes of commands arguments in headers devel-peer-request: finished in *.???? seconds (200) (glob) received listkey for "phases": 58 bytes checking for updated bookmarks preparing listkeys for "bookmarks" sending listkeys command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=listkeys devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 19 bytes of commands arguments in headers devel-peer-request: finished in *.???? seconds (200) (glob) received listkey for "bookmarks": 0 bytes sending branchmap command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=branchmap devel-peer-request: Vary X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: finished in *.???? seconds (200) (glob) preparing listkeys for "bookmarks" sending listkeys command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=listkeys devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 19 bytes of commands arguments in headers devel-peer-request: finished in *.???? seconds (200) (glob) received listkey for "bookmarks": 0 bytes 1 changesets found list of changesets: 7f4e523d01f2cc3765ac8934da3d14db775ff872 bundle2-output-bundle: "HG20", 5 parts total bundle2-output-part: "replycaps" 205 bytes payload bundle2-output-part: "check:phases" 24 bytes payload bundle2-output-part: "check:heads" streamed payload bundle2-output-part: "changegroup" (params: 1 mandatory) streamed payload bundle2-output-part: "phase-heads" 24 bytes payload sending unbundle command sending 1013 bytes devel-peer-request: POST http://localhost:$HGPORT2/?cmd=unbundle devel-peer-request: Content-length 1013 devel-peer-request: Content-type application/mercurial-0.1 devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 16 bytes of commands arguments in headers devel-peer-request: 1013 bytes of data devel-peer-request: finished in *.???? seconds (200) (glob) bundle2-input-bundle: no-transaction bundle2-input-part: "reply:changegroup" (advisory) (params: 0 advisory) supported bundle2-input-part: "output" (advisory) (params: 0 advisory) supported bundle2-input-part: total payload size 100 remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files bundle2-input-part: "output" (advisory) supported bundle2-input-bundle: 2 parts total preparing listkeys for "phases" sending listkeys command devel-peer-request: GET http://localhost:$HGPORT2/?cmd=listkeys devel-peer-request: Vary X-HgArg-1,X-HgProto-1 devel-peer-request: X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull devel-peer-request: 16 bytes of commands arguments in headers devel-peer-request: finished in *.???? seconds (200) (glob) received listkey for "phases": 15 bytes $ hg rollback -q $ sed 's/.*] "/"/' < ../access.log "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !) "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !) "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 403 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365* (glob) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files new changesets 8b6053c928fe:56f9bc90cce6 updating to branch default abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files new changesets 8b6053c928fe:56f9bc90cce6 updating to branch default abort: HTTP Error 404: Not Found [255] check error log $ cat error.log check abort error reporting while pulling/cloning $ $RUNTESTDIR/killdaemons.py $ hg serve -R test -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py $ cat hg3.pid >> $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ abort-clone requesting all changes remote: abort: this is an exercise abort: pull failed on remote [255] $ cat error.log disable pull-based clones $ hg serve -R test -p $HGPORT1 -d --pid-file=hg4.pid -E error.log --config server.disablefullbundle=True $ cat hg4.pid >> $DAEMON_PIDS $ hg clone http://localhost:$HGPORT1/ disable-pull-clone requesting all changes remote: abort: server has pull-based clones disabled abort: pull failed on remote (remove --pull if specified or upgrade Mercurial) [255] #if no-reposimplestore ... but keep stream clones working $ hg clone --stream --noupdate http://localhost:$HGPORT1/ test-stream-clone streaming all changes * files to transfer, * of data (glob) transferred * in * seconds (*/sec) (glob) searching for changes no changes found $ cat error.log #endif ... and also keep partial clones and pulls working $ hg clone http://localhost:$HGPORT1 --rev 0 test/partial/clone adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R test/partial/clone pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 2 changesets with 3 changes to 3 files new changesets 5fed3813f7f5:56f9bc90cce6 (run 'hg update' to get a working copy) $ hg clone -U -r 0 test/partial/clone test/another/clone adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe corrupt cookies file should yield a warning $ cat > $TESTTMP/cookies.txt << EOF > bad format > EOF $ hg --config auth.cookiefile=$TESTTMP/cookies.txt id http://localhost:$HGPORT/ (error loading cookie file $TESTTMP/cookies.txt: '*/cookies.txt' does not look like a Netscape format cookies file; continuing without cookies) (glob) 56f9bc90cce6 $ killdaemons.py Create dummy authentication handler that looks for cookies. It doesn't do anything useful. It just raises an HTTP 500 with details about the Cookie request header. We raise HTTP 500 because its message is printed in the abort message. $ cat > cookieauth.py << EOF > from mercurial import util > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > cookie = req.headers.get(b'Cookie') > if not cookie: > raise common.ErrorResponse(common.HTTP_SERVER_ERROR, b'no-cookie') > raise common.ErrorResponse(common.HTTP_SERVER_ERROR, b'Cookie: %s' % cookie) > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOF $ hg serve --config extensions.cookieauth=cookieauth.py -R test -p $HGPORT -d --pid-file=pid $ cat pid > $DAEMON_PIDS Request without cookie sent should fail due to lack of cookie $ hg id http://localhost:$HGPORT abort: HTTP Error 500: no-cookie [255] Populate a cookies file $ cat > cookies.txt << EOF > # HTTP Cookie File > # Expiration is 2030-01-01 at midnight > .example.com TRUE / FALSE 1893456000 hgkey examplevalue > EOF Should not send a cookie for another domain $ hg --config auth.cookiefile=cookies.txt id http://localhost:$HGPORT/ abort: HTTP Error 500: no-cookie [255] Add a cookie entry for our test server and verify it is sent $ cat >> cookies.txt << EOF > localhost.local FALSE / FALSE 1893456000 hgkey localhostvalue > EOF $ hg --config auth.cookiefile=cookies.txt id http://localhost:$HGPORT/ abort: HTTP Error 500: Cookie: hgkey=localhostvalue [255]