view tests/test-mq-qrefresh-replace-log-message.t @ 39356:c8e4eae84808

narrow: add server logic to send cg while widening without ellipsis

Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.

The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.

This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.

Following things can definitely be improved in the logic this patch adds:

  1) Send just the filelogs and treemanifests
  2) Send the filelogs only for the additions in the include

I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.

This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.

The test changes demonstrate that the new implementation is correct and fixes
things.

Differential Revision: https://phab.mercurial-scm.org/D4383

Environment setup for MQ

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [defaults]
  > # explicit date to commit with fixed hashid
  > qnew = -d "0 0"
  > qrefresh = -d "0 0"
  > qfold = -d "0 0"
  > EOF
  $ hg init
  $ hg qinit

Should fail if no patches applied
(this tests also that editor is not invoked if '--edit' is not
specified)

  $ hg qrefresh
  no patches applied
  [1]
  $ hg qrefresh -e
  no patches applied
  [1]
  $ hg qnew -m "First commit message" first-patch
  $ echo aaaa > file
  $ hg add file
  $ HGEDITOR=cat hg qrefresh

Should display 'First commit message'

  $ hg log -l1 --template "{desc}\n"
  First commit message

Testing changing message with -m
(this tests also that '--edit' can be used with '--message', and
that '[committemplate] changeset' definition and commit log specific
template keyword 'extramsg' work well)

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > listupfiles = {file_adds %
  >    "HG: added {file}\n"     }{file_mods %
  >    "HG: changed {file}\n"   }{file_dels %
  >    "HG: removed {file}\n"   }{if(files, "",
  >    "HG: no files changed\n")}
  > 
  > changeset = HG: this is customized commit template
  >     {desc}\n\n
  >     HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  >     HG: {extramsg}
  >     HG: --
  >     HG: user: {author}
  >     HG: branch '{branch}'\n{listupfiles}
  > EOF

  $ echo bbbb > file
  $ HGEDITOR=cat hg qrefresh -m "Second commit message" -e
  HG: this is customized commit template
  Second commit message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file

  $ cat >> .hg/hgrc <<EOF
  > # disable customizing for subsequent tests
  > [committemplate]
  > changeset =
  > EOF

Should display 'Second commit message'

  $ hg log -l1 --template "{desc}\n"
  Second commit message

Testing changing message with -l

  $ echo "Third commit message" > logfile
  $ echo " This is the 3rd log message" >> logfile
  $ echo bbbb > file
  $ hg qrefresh -l logfile

Should display 'Third commit message\\\n This is the 3rd log message'

  $ hg log -l1 --template "{desc}\n"
  Third commit message
   This is the 3rd log message

Testing changing message with -l-

  $ hg qnew -m "First commit message" second-patch
  $ echo aaaa > file2
  $ hg add file2
  $ echo bbbb > file2
  $ (echo "Fifth commit message"; echo " This is the 5th log message") | hg qrefresh -l-

Should display 'Fifth commit message\\\n This is the 5th log message'

  $ hg log -l1 --template "{desc}\n"
  Fifth commit message
   This is the 5th log message

Test saving last-message.txt:

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > (echo; echo "test saving last-message.txt") >> \$1
  > EOF

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import error
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise error.Abort(b'emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ hg qapplied
  first-patch
  second-patch
  $ hg tip --template "{files}\n"
  file2

(test that editor is not invoked before transaction starting)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(reset applied patches and directory status)

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > commitfailure = !
  > EOF

  $ hg qapplied
  first-patch
  $ hg status -A file2
  ? file2
  $ rm file2
  $ hg qpush -q second-patch
  now at: second-patch

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status --rev "second-patch^1" -arm
  A file2
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  ==== before editing
  Fifth commit message
   This is the 5th log message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file2
  ====
  note: commit message saved in .hg/last-message.txt
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  Fifth commit message
   This is the 5th log message
  
  
  
  test saving last-message.txt

Test visibility of in-memory dirstate changes outside transaction to
external process

  $ cat > $TESTTMP/checkvisibility.sh <<EOF
  > echo "===="
  > hg parents --template "{rev}:{node|short}\n"
  > hg status -arm
  > echo "===="
  > EOF

== test visibility to external editor

  $ hg update -C -q first-patch
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ HGEDITOR="sh \"$TESTTMP/checkvisibility.sh\"" hg qrefresh -e
  ====
  0:25e397dabed2
  A file2
  ====
  note: commit message saved in .hg/last-message.txt
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

(rebuilding at failure of qrefresh bases on rev #0, and it causes
dropping status of "file2")

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

== test visibility to precommit external hook

  $ hg update -C -q
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > precommit.checkvisibility = sh "$TESTTMP/checkvisibility.sh"
  > EOF

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ hg qrefresh
  ====
  0:25e397dabed2
  A file2
  ====
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > precommit.checkvisibility =
  > EOF

== test visibility to pretxncommit external hook

  $ hg update -C -q
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.checkvisibility = sh "$TESTTMP/checkvisibility.sh"
  > # make checkvisibility run before unexpectedabort
  > priority.pretxncommit.checkvisibility = 10
  > EOF

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ hg qrefresh
  ====
  0:25e397dabed2
  A file2
  ====
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.checkvisibility =
  > EOF