view tests/test-revert-interactive.t @ 39356:c8e4eae84808

narrow: add server logic to send cg while widening without ellipsis

Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.

The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.

This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.

Following things can definitely be improved in the logic this patch adds:

  1) Send just the filelogs and treemanifests
  2) Send the filelogs only for the additions in the include

I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.

This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.

The test changes demonstrate that the new implementation is correct and fixes
things.

Differential Revision: https://phab.mercurial-scm.org/D4383

Revert interactive tests
1 add and commit file f
2 add commit file folder1/g
3 add and commit file folder2/h
4 add and commit file folder1/i
5 commit change to file f
6 commit changes to files folder1/g folder2/h
7 commit changes to files folder1/g folder2/h
8 revert interactive to commit id 2 (line 3 above), check that folder1/i is removed and
9 make workdir match 7
10 run the same test than 8 from within folder1 and check same expectations

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > interactive = true
  > [extensions]
  > record =
  > purge = 
  > EOF


  $ mkdir -p a/folder1 a/folder2
  $ cd a
  $ hg init
  >>> open('f', 'wb').write(b"1\n2\n3\n4\n5\n") and None
  $ hg add f ; hg commit -m "adding f"
  $ cat f > folder1/g ; hg add folder1/g ; hg commit -m "adding folder1/g"
  $ cat f > folder2/h ; hg add folder2/h ; hg commit -m "adding folder2/h"
  $ cat f > folder1/i ; hg add folder1/i ; hg commit -m "adding folder1/i"
  >>> open('f', 'wb').write(b"a\n1\n2\n3\n4\n5\nb\n") and None
  $ hg commit -m "modifying f"
  >>> open('folder1/g', 'wb').write(b"c\n1\n2\n3\n4\n5\nd\n") and None
  $ hg commit -m "modifying folder1/g"
  >>> open('folder2/h', 'wb').write(b"e\n1\n2\n3\n4\n5\nf\n") and None
  $ hg commit -m "modifying folder2/h"
  $ hg tip
  changeset:   6:59dd6e4ab63a
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modifying folder2/h
  
  $ hg revert -i -r 2 --all -- << EOF
  > y
  > y
  > y
  > y
  > y
  > ?
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g
  removing folder1/i
  reverting folder2/h
  remove added file folder1/i (Yn)? y
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] ?
  
  y - yes, apply this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - apply remaining changes to this file
  d - done, skip remaining changes and files
  a - apply all changes to all remaining files
  q - quit, applying no changes
  ? - ? (display help)
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f

Test that --interactive lift the need for --all

  $ echo q | hg revert -i -r 2
  reverting folder1/g
  reverting folder2/h
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] q
  
  abort: user quit
  [255]
  $ ls folder1/
  g

Test that a noop revert doesn't do an unnecessary backup
  $ (echo y; echo n) | hg revert -i -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'? [Ynesfdaq?] n
  
  $ ls folder1/
  g

Test --no-backup
  $ (echo y; echo y) | hg revert -i -C -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'? [Ynesfdaq?] y
  
  $ ls folder1/
  g
  >>> open('folder1/g', 'wb').write(b"1\n2\n3\n4\n5\nd\n") and None


  $ hg update -C 6
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg revert -i -r 2 --all -- << EOF
  > n
  > y
  > y
  > y
  > y
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g
  removing folder1/i
  reverting folder2/h
  remove added file folder1/i (Yn)? n
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f
  $ hg st
  M f
  M folder1/g
  $ hg revert --interactive f << EOF
  > y
  > ?
  > y
  > n
  > n
  > EOF
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  discard change 1/2 to 'f'? [Ynesfdaq?] ?
  
  y - yes, discard this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - discard remaining changes to this file
  d - done, skip remaining changes and files
  a - discard all changes to all remaining files
  q - quit, discarding no changes
  ? - ? (display help)
  discard change 1/2 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  discard change 2/2 to 'f'? [Ynesfdaq?] n
  
  $ hg st
  M f
  M folder1/g
  ? f.orig
  $ cat f
  a
  1
  2
  3
  4
  5
  $ cat f.orig
  1
  2
  3
  4
  5
  $ rm f.orig
  $ hg update -C .
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check editing files newly added by a revert

1) Create a dummy editor changing 1 to 42
  $ cat > $TESTTMP/editor.sh << '__EOF__'
  > cat "$1"  | sed "s/1/42/g"  > tt
  > mv tt  "$1"
  > __EOF__

2) Add k
  $ printf "1\n" > k
  $ hg add k
  $ hg commit -m "add k"

3) Use interactive revert with editing (replacing +1 with +42):
  $ printf "0\n2\n" > k
  $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i  <<EOF
  > y
  > e
  > EOF
  reverting k
  diff --git a/k b/k
  1 hunks, 2 lines changed
  examine changes to 'k'? [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
  -1
  +0
  +2
  discard this change to 'k'? [Ynesfdaq?] e
  
  $ cat k
  42

  $ hg update -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg purge
  $ touch newfile
  $ hg add newfile
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > n
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? n
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > y
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? y
  $ hg status
  ? newfile

When a line without EOL is selected during "revert -i" (issue5651)

  $ hg init $TESTTMP/revert-i-eol
  $ cd $TESTTMP/revert-i-eol
  $ echo 0 > a
  $ hg ci -qAm 0
  $ printf 1 >> a
  $ hg ci -qAm 1
  $ cat a
  0
  1 (no-eol)

  $ hg revert -ir'.^' <<EOF
  > y
  > y
  > EOF
  reverting a
  diff --git a/a b/a
  1 hunks, 1 lines changed
  examine changes to 'a'? [Ynesfdaq?] y
  
  @@ -1,2 +1,1 @@
   0
  -1
  \ No newline at end of file
  apply this change to 'a'? [Ynesfdaq?] y
  
  $ cat a
  0

When specified pattern does not exist, we should exit early (issue5789).

  $ hg files
  a
  $ hg rev b
  b: no such file in rev b40d1912accf
  $ hg rev -i b
  b: no such file in rev b40d1912accf

  $ cd ..