view tests/test-sparse-profiles.t @ 39356:c8e4eae84808

narrow: add server logic to send cg while widening without ellipsis

Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.

The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.

This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.

Following things can definitely be improved in the logic this patch adds:

  1) Send just the filelogs and treemanifests
  2) Send the filelogs only for the additions in the include

I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.

This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.

The test changes demonstrate that the new implementation is correct and fixes
things.

Differential Revision: https://phab.mercurial-scm.org/D4383

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > purge=
  > strip=
  > rebase=
  > EOF

Config file without [section] is rejected

  $ cat > bad.sparse <<EOF
  > *.html
  > EOF

  $ hg debugsparse --import-rules bad.sparse
  abort: sparse config entry outside of section: *.html
  (add an [include] or [exclude] line to declare the entry type)
  [255]
  $ rm bad.sparse

  $ echo a > index.html
  $ echo x > data.py
  $ echo z > readme.txt
  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > EOF
  $ hg ci -Aqm 'initial'

  $ hg debugsparse --include '*.sparse'

Verify enabling a single profile works

  $ hg debugsparse --enable-profile webpage.sparse
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify enabling two profiles works

  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify disabling a profile works

  $ hg debugsparse --disable-profile webpage.sparse
  $ ls
  backend.sparse
  data.py
  webpage.sparse

Verify that a profile is updated across multiple commits

  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > *.txt
  > EOF

  $ echo foo >> data.py

  $ hg ci -m 'edit profile'
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg up -q 0
  $ ls
  backend.sparse
  data.py
  webpage.sparse

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

Introduce a conflicting .hgsparse change

  $ hg up -q 0
  $ cat > backend.sparse <<EOF
  > # Different backend sparse profile
  > [include]
  > *.html
  > EOF
  $ echo bar >> data.py

  $ hg ci -qAm "edit profile other"
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify conflicting merge pulls in the conflicting changes

  $ hg merge 1
  temporarily included 1 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 2 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving the merge removes the temporarily unioned files

  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)

  $ hg ci -qAm "merge profiles"
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Verify stripping refreshes dirstate

  $ hg strip -q -r .
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify rebase conflicts pulls in the conflicting changes

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg rebase -d 2
  rebasing 1:a2b1de640a62 "edit profile"
  temporarily included 1 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]
  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving conflict removes the temporary files

  $ cat > backend.sparse <<EOF
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)
  continue: hg rebase --continue

  $ hg rebase -q --continue
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Test checking out a commit that does not contain the sparse profile. The
warning message can be suppressed by setting missingwarning = false in
[sparse] section of your config:

  $ hg debugsparse --reset
  $ hg rm *.sparse
  $ hg commit -m "delete profiles"
  $ hg up -q ".^"
  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  index.html
  readme.txt
  $ hg up tip | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ ls
  data.py
  index.html
  readme.txt
  $ hg debugsparse --disable-profile backend.sparse | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ cat >> .hg/hgrc <<EOF
  > [sparse]
  > missingwarning = false
  > EOF
  $ hg debugsparse --enable-profile backend.sparse

  $ cd ..

#if unix-permissions

Test file permissions changing across a sparse profile change
  $ hg init sparseperm
  $ cd sparseperm
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ touch a b
  $ cat > .hgsparse <<EOF
  > [include]
  > a
  > EOF
  $ hg commit -Aqm 'initial'
  $ chmod a+x b
  $ hg commit -qm 'make executable'
  $ cat >> .hgsparse <<EOF
  > b
  > EOF
  $ hg commit -qm 'update profile'
  $ hg up -q 0
  $ hg debugsparse --enable-profile .hgsparse
  $ hg up -q 2
  $ ls -l b
  -rwxr-xr-x* b (glob)

#endif