Mercurial > hg
view tests/test-status.t @ 39356:c8e4eae84808
narrow: add server logic to send cg while widening without ellipsis
Before this patch, if you try to widen a narrow clone without ellipsis enabled,
it will be broken and the exchange.pull() done by tracked command to widen the
clone will be no-op because no custom logic exists for this and server sees that
we have all csets and it says `no changes found`.
The widening with ellipsis send KILL for existing changegroups and send new
changegroups because of the change in ellipsis hash, but we can prevent that in
non-ellipsis cases.
This patch adds server side logic to send the changegroups for the changesets
which are on the client again with filelogs and manifests for the new includes.
This is a very starting implementation and we send changegroups and manifests
too while we can prevent them.
Following things can definitely be improved in the logic this patch adds:
1) Send just the filelogs and treemanifests
2) Send the filelogs only for the additions in the include
I tried 1) here but the code is coupled tightly and the way I was able to do
that was hacking into the changegroup generation code in a very dirty way, like
adding conditionals and preventing the yield.
This patch also adds a 'widen' kwarg to prevent other commands except widening
to go through that codepath.
The test changes demonstrate that the new implementation is correct and fixes
things.
Differential Revision: https://phab.mercurial-scm.org/D4383
author | Pulkit Goyal <pulkit@yandex-team.ru> |
---|---|
date | Sun, 26 Aug 2018 20:20:34 +0300 |
parents | fe3ca1e6f786 |
children | 46f3ff64bea7 |
line wrap: on
line source
$ hg init repo1 $ cd repo1 $ mkdir a b a/1 b/1 b/2 $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2 hg status in repo root: $ hg status ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root hg status . in repo root: $ hg status . ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a . ? 1/in_a_1 ? in_a $ hg status --cwd a .. ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd b ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b . ? 1/in_b_1 ? 2/in_b_2 ? in_b $ hg status --cwd b .. ? ../a/1/in_a_1 ? ../a/in_a ? 1/in_b_1 ? 2/in_b_2 ? in_b ? ../in_root $ hg status --cwd a/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a/1 . ? in_a_1 $ hg status --cwd a/1 .. ? in_a_1 ? ../in_a $ hg status --cwd b/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/1 . ? in_b_1 $ hg status --cwd b/1 .. ? in_b_1 ? ../2/in_b_2 ? ../in_b $ hg status --cwd b/2 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/2 . ? in_b_2 $ hg status --cwd b/2 .. ? ../1/in_b_1 ? in_b_2 ? ../in_b combining patterns with root and patterns without a root works $ hg st a/in_a re:.*b$ ? a/in_a ? b/in_b tweaking defaults works $ hg status --cwd a --config ui.tweakdefaults=yes ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ HGPLAIN=1 hg status --cwd a --config ui.tweakdefaults=yes ? a/1/in_a_1 (glob) ? a/in_a (glob) ? b/1/in_b_1 (glob) ? b/2/in_b_2 (glob) ? b/in_b (glob) ? in_root $ HGPLAINEXCEPT=tweakdefaults hg status --cwd a --config ui.tweakdefaults=yes ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root (glob) relative paths can be requested $ cat >> $HGRCPATH <<EOF > [commands] > status.relative = True > EOF $ hg status --cwd a ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ HGPLAIN=1 hg status --cwd a ? a/1/in_a_1 (glob) ? a/in_a (glob) ? b/1/in_b_1 (glob) ? b/2/in_b_2 (glob) ? b/in_b (glob) ? in_root if relative paths are explicitly off, tweakdefaults doesn't change it $ cat >> $HGRCPATH <<EOF > [commands] > status.relative = False > EOF $ hg status --cwd a --config ui.tweakdefaults=yes ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ cd .. $ hg init repo2 $ cd repo2 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg ci -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch modified added unknown ignored $ hg add added $ hg remove removed $ rm deleted hg status: $ hg status A added R removed ! deleted ? unknown hg status modified added removed deleted unknown never-existed ignored: $ hg status modified added removed deleted unknown never-existed ignored never-existed: * (glob) A added R removed ! deleted ? unknown $ hg copy modified copied hg status -C: $ hg status -C A added A copied modified R removed ! deleted ? unknown hg status -A: $ hg status -A A added A copied modified R removed ! deleted ? unknown I ignored C .hgignore C modified $ hg status -A -T '{status} {path} {node|shortest}\n' A added ffff A copied ffff R removed ffff ! deleted ffff ? unknown ffff I ignored ffff C .hgignore ffff C modified ffff $ hg status -A -Tjson [ { "path": "added", "status": "A" }, { "copy": "modified", "path": "copied", "status": "A" }, { "path": "removed", "status": "R" }, { "path": "deleted", "status": "!" }, { "path": "unknown", "status": "?" }, { "path": "ignored", "status": "I" }, { "path": ".hgignore", "status": "C" }, { "path": "modified", "status": "C" } ] $ hg status -A -Tpickle > pickle >>> from __future__ import print_function >>> import pickle >>> print(sorted((x['status'], x['path']) for x in pickle.load(open("pickle")))) [('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')] $ rm pickle $ echo "^ignoreddir$" > .hgignore $ mkdir ignoreddir $ touch ignoreddir/file Test templater support: $ hg status -AT "[{status}]\t{if(copy, '{copy} -> ')}{path}\n" [M] .hgignore [A] added [A] modified -> copied [R] removed [!] deleted [?] ignored [?] unknown [I] ignoreddir/file [C] modified $ hg status -AT default M .hgignore A added A copied modified R removed ! deleted ? ignored ? unknown I ignoreddir/file C modified $ hg status -T compact abort: "status" not in template map [255] hg status ignoreddir/file: $ hg status ignoreddir/file hg status -i ignoreddir/file: $ hg status -i ignoreddir/file I ignoreddir/file $ cd .. Check 'status -q' and some combinations $ hg init repo3 $ cd repo3 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg commit -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch added unknown ignored $ hg add added $ echo "test" >> modified $ hg remove removed $ rm deleted $ hg copy modified copied Specify working directory revision explicitly, that should be the same as "hg status" $ hg status --change "wdir()" M modified A added A copied R removed ! deleted ? unknown Run status with 2 different flags. Check if result is the same or different. If result is not as expected, raise error $ assert() { > hg status $1 > ../a > hg status $2 > ../b > if diff ../a ../b > /dev/null; then > out=0 > else > out=1 > fi > if [ $3 -eq 0 ]; then > df="same" > else > df="different" > fi > if [ $out -ne $3 ]; then > echo "Error on $1 and $2, should be $df." > fi > } Assert flag1 flag2 [0-same | 1-different] $ assert "-q" "-mard" 0 $ assert "-A" "-marduicC" 0 $ assert "-qA" "-mardcC" 0 $ assert "-qAui" "-A" 0 $ assert "-qAu" "-marducC" 0 $ assert "-qAi" "-mardicC" 0 $ assert "-qu" "-u" 0 $ assert "-q" "-u" 1 $ assert "-m" "-a" 1 $ assert "-r" "-d" 1 $ cd .. $ hg init repo4 $ cd repo4 $ touch modified removed deleted $ hg ci -q -A -m 'initial checkin' $ touch added unknown $ hg add added $ hg remove removed $ rm deleted $ echo x > modified $ hg copy modified copied $ hg ci -m 'test checkin' -d "1000001 0" $ rm * $ touch unrelated $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0" hg status --change 1: $ hg status --change 1 M modified A added A copied R removed hg status --change 1 unrelated: $ hg status --change 1 unrelated hg status -C --change 1 added modified copied removed deleted: $ hg status -C --change 1 added modified copied removed deleted M modified A added A copied modified R removed hg status -A --change 1 and revset: $ hg status -A --change '1|1' M modified A added A copied modified R removed C deleted $ cd .. hg status with --rev and reverted changes: $ hg init reverted-changes-repo $ cd reverted-changes-repo $ echo a > file $ hg add file $ hg ci -m a $ echo b > file $ hg ci -m b reverted file should appear clean $ hg revert -r 0 . reverting file $ hg status -A --rev 0 C file #if execbit reverted file with changed flag should appear modified $ chmod +x file $ hg status -A --rev 0 M file $ hg revert -r 0 . reverting file reverted and committed file with changed flag should appear modified $ hg co -C . 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ chmod +x file $ hg ci -m 'change flag' $ hg status -A --rev 1 --rev 2 M file $ hg diff -r 1 -r 2 #endif $ cd .. hg status of binary file starting with '\1\n', a separator for metadata: $ hg init repo5 $ cd repo5 >>> open("010a", r"wb").write(b"\1\nfoo") and None $ hg ci -q -A -m 'initial checkin' $ hg status -A C 010a >>> open("010a", r"wb").write(b"\1\nbar") and None $ hg status -A M 010a $ hg ci -q -m 'modify 010a' $ hg status -A --rev 0:1 M 010a $ touch empty $ hg ci -q -A -m 'add another file' $ hg status -A --rev 1:2 010a C 010a $ cd .. test "hg status" with "directory pattern" which matches against files only known on target revision. $ hg init repo6 $ cd repo6 $ echo a > a.txt $ hg add a.txt $ hg commit -m '#0' $ mkdir -p 1/2/3/4/5 $ echo b > 1/2/3/4/5/b.txt $ hg add 1/2/3/4/5/b.txt $ hg commit -m '#1' $ hg update -C 0 > /dev/null $ hg status -A C a.txt the directory matching against specified pattern should be removed, because directory existence prevents 'dirstate.walk()' from showing warning message about such pattern. $ test ! -d 1 $ hg status -A --rev 1 1/2/3/4/5/b.txt R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3/4/5 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1 R 1/2/3/4/5/b.txt $ hg status --config ui.formatdebug=True --rev 1 1 status = [ {*'path': '1/2/3/4/5/b.txt'*}, (glob) ] #if windows $ hg --config ui.slash=false status -A --rev 1 1 R 1\2\3\4\5\b.txt #endif $ cd .. Status after move overwriting a file (issue4458) ================================================= $ hg init issue4458 $ cd issue4458 $ echo a > a $ echo b > b $ hg commit -Am base adding a adding b with --force $ hg mv b --force a $ hg st --copies M a b R b $ hg revert --all reverting a undeleting b $ rm *.orig without force $ hg rm a $ hg st --copies R a $ hg mv b a $ hg st --copies M a b R b using ui.statuscopies setting $ hg st --config ui.statuscopies=true M a b R b $ hg st --config ui.statuscopies=false M a R b $ hg st --config ui.tweakdefaults=yes M a b R b using log status template (issue5155) $ hg log -Tstatus -r 'wdir()' -C changeset: 2147483647:ffffffffffff parent: 0:8c55c58b4c0e user: test date: * (glob) files: M a b R b Other "bug" highlight, the revision status does not report the copy information. This is buggy behavior. $ hg commit -m 'blah' $ hg st --copies --change . M a R b using log status template, the copy information is displayed correctly. $ hg log -Tstatus -r. -C changeset: 1:6685fde43d21 tag: tip user: test date: * (glob) summary: blah files: M a b R b $ cd ..