view hgext/split.py @ 40337:cb516a854bc7

narrow: only send the narrowspecs back if ACL in play

I am unable to think why we need to send narrowspecs back from the server. The
current state adds a 'narrow:spec' part to each changegroup which is generated
when narrow extension is enabled. So we are sending narrowspecs on pull also.

There is a problem with sending the narrowspecs the way we are doing it right
now. We add include and exclude as parameter of the 'narrow:spec' bundle2 part.
The the len of include or exclude string increase 255 which is obvious while
working on large repos, bundle2 generation code breaks. For more on that refer
issue5952 on bugzilla.

I was thinking why we need to send the narrowspecs back, and deleted the
'narrow:spec' bundle2 part generation code and found that only narrow-acl test
has some failure.

With this patch, we will only send the 'narrow:spec' bundle2 part if ACL is
enabled because the original narrowspecs in those cases can be a subset of
narrowspecs user requested.

There are phase related output change in couple of tests. The output change
shows that we are now dealing in public phases completely. So maybe sending the
narrow:spec bundle2 part was preventing phases being exchanged or phase bundle2
data being applied.

Differential Revision: https://phab.mercurial-scm.org/D4931

# split.py - split a changeset into smaller ones
#
# Copyright 2015 Laurent Charignon <[e-mail]>
# Copyright 2017 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""command to split a changeset into smaller ones (EXPERIMENTAL)"""

from __future__ import absolute_import

from mercurial.i18n import _

from mercurial.node import (
    nullid,
    short,
)

from mercurial import (
    bookmarks,
    cmdutil,
    commands,
    error,
    hg,
    obsolete,
    phases,
    pycompat,
    registrar,
    revsetlang,
    scmutil,
)

# allow people to use split without explicitly enabling rebase extension
from . import (
    rebase,
)

cmdtable = {}
command = registrar.command(cmdtable)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('split',
    [('r', 'rev', '', _("revision to split"), _('REV')),
     ('', 'rebase', True, _('rebase descendants after split')),
    ] + cmdutil.commitopts2,
    _('hg split [--no-rebase] [[-r] REV]'),
    helpcategory=command.CATEGORY_CHANGE_MANAGEMENT, helpbasic=True)
def split(ui, repo, *revs, **opts):
    """split a changeset into smaller ones

    Repeatedly prompt changes and commit message for new changesets until there
    is nothing left in the original changeset.

    If --rev was not given, split the working directory parent.

    By default, rebase connected non-obsoleted descendants onto the new
    changeset. Use --no-rebase to avoid the rebase.
    """
    opts = pycompat.byteskwargs(opts)
    revlist = []
    if opts.get('rev'):
        revlist.append(opts.get('rev'))
    revlist.extend(revs)
    with repo.wlock(), repo.lock(), repo.transaction('split') as tr:
        revs = scmutil.revrange(repo, revlist or ['.'])
        if len(revs) > 1:
            raise error.Abort(_('cannot split multiple revisions'))

        rev = revs.first()
        ctx = repo[rev]
        if rev is None or ctx.node() == nullid:
            ui.status(_('nothing to split\n'))
            return 1
        if ctx.node() is None:
            raise error.Abort(_('cannot split working directory'))

        # rewriteutil.precheck is not very useful here because:
        # 1. null check is done above and it's more friendly to return 1
        #    instead of abort
        # 2. mergestate check is done below by cmdutil.bailifchanged
        # 3. unstable check is more complex here because of --rebase
        #
        # So only "public" check is useful and it's checked directly here.
        if ctx.phase() == phases.public:
            raise error.Abort(_('cannot split public changeset'),
                              hint=_("see 'hg help phases' for details"))

        descendants = list(repo.revs('(%d::) - (%d)', rev, rev))
        alloworphaned = obsolete.isenabled(repo, obsolete.allowunstableopt)
        if opts.get('rebase'):
            # Skip obsoleted descendants and their descendants so the rebase
            # won't cause conflicts for sure.
            torebase = list(repo.revs('%ld - (%ld & obsolete())::',
                                      descendants, descendants))
            if not alloworphaned and len(torebase) != len(descendants):
                raise error.Abort(_('split would leave orphaned changesets '
                                    'behind'))
        else:
            if not alloworphaned and descendants:
                raise error.Abort(
                    _('cannot split changeset with children without rebase'))
            torebase = ()

        if len(ctx.parents()) > 1:
            raise error.Abort(_('cannot split a merge changeset'))

        cmdutil.bailifchanged(repo)

        # Deactivate bookmark temporarily so it won't get moved unintentionally
        bname = repo._activebookmark
        if bname and repo._bookmarks[bname] != ctx.node():
            bookmarks.deactivate(repo)

        wnode = repo['.'].node()
        top = None
        try:
            top = dosplit(ui, repo, tr, ctx, opts)
        finally:
            # top is None: split failed, need update --clean recovery.
            # wnode == ctx.node(): wnode split, no need to update.
            if top is None or wnode != ctx.node():
                hg.clean(repo, wnode, show_stats=False)
            if bname:
                bookmarks.activate(repo, bname)
        if torebase and top:
            dorebase(ui, repo, torebase, top)

def dosplit(ui, repo, tr, ctx, opts):
    committed = [] # [ctx]

    # Set working parent to ctx.p1(), and keep working copy as ctx's content
    # NOTE: if we can have "update without touching working copy" API, the
    # revert step could be cheaper.
    hg.clean(repo, ctx.p1().node(), show_stats=False)
    parents = repo.changelog.parents(ctx.node())
    ui.pushbuffer()
    cmdutil.revert(ui, repo, ctx, parents)
    ui.popbuffer() # discard "reverting ..." messages

    # Any modified, added, removed, deleted result means split is incomplete
    incomplete = lambda repo: any(repo.status()[:4])

    # Main split loop
    while incomplete(repo):
        if committed:
            header = (_('HG: Splitting %s. So far it has been split into:\n')
                      % short(ctx.node()))
            for c in committed:
                firstline = c.description().split('\n', 1)[0]
                header += _('HG: - %s: %s\n') % (short(c.node()), firstline)
            header += _('HG: Write commit message for the next split '
                        'changeset.\n')
        else:
            header = _('HG: Splitting %s. Write commit message for the '
                       'first split changeset.\n') % short(ctx.node())
        opts.update({
            'edit': True,
            'interactive': True,
            'message': header + ctx.description(),
        })
        commands.commit(ui, repo, **pycompat.strkwargs(opts))
        newctx = repo['.']
        committed.append(newctx)

    if not committed:
        raise error.Abort(_('cannot split an empty revision'))

    scmutil.cleanupnodes(repo, {ctx.node(): [c.node() for c in committed]},
                         operation='split', fixphase=True)

    return committed[-1]

def dorebase(ui, repo, src, destctx):
    rebase.rebase(ui, repo, rev=[revsetlang.formatspec('%ld', src)],
                  dest=revsetlang.formatspec('%d', destctx.rev()))