Mercurial > hg
view mercurial/dagparser.py @ 40337:cb516a854bc7
narrow: only send the narrowspecs back if ACL in play
I am unable to think why we need to send narrowspecs back from the server. The
current state adds a 'narrow:spec' part to each changegroup which is generated
when narrow extension is enabled. So we are sending narrowspecs on pull also.
There is a problem with sending the narrowspecs the way we are doing it right
now. We add include and exclude as parameter of the 'narrow:spec' bundle2 part.
The the len of include or exclude string increase 255 which is obvious while
working on large repos, bundle2 generation code breaks. For more on that refer
issue5952 on bugzilla.
I was thinking why we need to send the narrowspecs back, and deleted the
'narrow:spec' bundle2 part generation code and found that only narrow-acl test
has some failure.
With this patch, we will only send the 'narrow:spec' bundle2 part if ACL is
enabled because the original narrowspecs in those cases can be a subset of
narrowspecs user requested.
There are phase related output change in couple of tests. The output change
shows that we are now dealing in public phases completely. So maybe sending the
narrow:spec bundle2 part was preventing phases being exchanged or phase bundle2
data being applied.
Differential Revision: https://phab.mercurial-scm.org/D4931
author | Pulkit Goyal <pulkit@yandex-team.ru> |
---|---|
date | Wed, 10 Oct 2018 17:36:59 +0300 |
parents | e7aa113b14f7 |
children | 2372284d9457 |
line wrap: on
line source
# dagparser.py - parser and generator for concise description of DAGs # # Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import re import string from .i18n import _ from . import ( error, pycompat, ) from .utils import ( stringutil, ) def parsedag(desc): '''parses a DAG from a concise textual description; generates events "+n" is a linear run of n nodes based on the current default parent "." is a single node based on the current default parent "$" resets the default parent to -1 (implied at the start); otherwise the default parent is always the last node created "<p" sets the default parent to the backref p "*p" is a fork at parent p, where p is a backref "*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs "/p2/.../pn" is a merge of the preceding node and p2..pn ":name" defines a label for the preceding node; labels can be redefined "@text" emits an annotation event for text "!command" emits an action event for the current node "!!my command\n" is like "!", but to the end of the line "#...\n" is a comment up to the end of the line Whitespace between the above elements is ignored. A backref is either * a number n, which references the node curr-n, where curr is the current node, or * the name of a label you placed earlier using ":name", or * empty to denote the default parent. All string valued-elements are either strictly alphanumeric, or must be enclosed in double quotes ("..."), with "\" as escape character. Generates sequence of ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', command) for actions (!) ('C', command) for line actions (!!) Examples -------- Example of a complex graph (output not shown for brevity): >>> len(list(parsedag(b""" ... ... +3 # 3 nodes in linear run ... :forkhere # a label for the last of the 3 nodes from above ... +5 # 5 more nodes on one branch ... :mergethis # label again ... <forkhere # set default parent to labeled fork node ... +10 # 10 more nodes on a parallel branch ... @stable # following nodes will be annotated as "stable" ... +5 # 5 nodes in stable ... !addfile # custom command; could trigger new file in next node ... +2 # two more nodes ... /mergethis # merge last node with labeled node ... +4 # 4 more nodes descending from merge node ... ... """))) 34 Empty list: >>> list(parsedag(b"")) [] A simple linear run: >>> list(parsedag(b"+3")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] Some non-standard ways to define such runs: >>> list(parsedag(b"+1+2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"+1*1*")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"*")) [('n', (0, [-1]))] >>> list(parsedag(b"...")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] A fork and a join, using numeric back references: >>> list(parsedag(b"+2*2*/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+2<2+1/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] Placing a label: >>> list(parsedag(b"+1 :mylabel +1")) [('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))] An empty label (silly, really): >>> list(parsedag(b"+1:+1")) [('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))] Fork and join, but with labels instead of numeric back references: >>> list(parsedag(b"+1:f +1:p2 *f */p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+1:f +1:p2 <f +1 /p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] Restarting from the root: >>> list(parsedag(b"+1 $ +1")) [('n', (0, [-1])), ('n', (1, [-1]))] Annotations, which are meant to introduce sticky state for subsequent nodes: >>> list(parsedag(b"+1 @ann +1")) [('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))] >>> list(parsedag(b'+1 @"my annotation" +1')) [('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))] Commands, which are meant to operate on the most recently created node: >>> list(parsedag(b"+1 !cmd +1")) [('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !"my command" +1')) [('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !!my command line\\n +1')) [('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))] Comments, which extend to the end of the line: >>> list(parsedag(b'+1 # comment\\n+1')) [('n', (0, [-1])), ('n', (1, [0]))] Error: >>> try: list(parsedag(b'+1 bad')) ... except Exception as e: print(pycompat.sysstr(bytes(e))) invalid character in dag description: bad... ''' if not desc: return wordchars = pycompat.bytestr(string.ascii_letters + string.digits) labels = {} p1 = -1 r = 0 def resolve(ref): if not ref: return p1 elif ref[0] in pycompat.bytestr(string.digits): return r - int(ref) else: return labels[ref] chiter = pycompat.iterbytestr(desc) def nextch(): return next(chiter, '\0') def nextrun(c, allow): s = '' while c in allow: s += c c = nextch() return c, s def nextdelimited(c, limit, escape): s = '' while c != limit: if c == escape: c = nextch() s += c c = nextch() return nextch(), s def nextstring(c): if c == '"': return nextdelimited(nextch(), '"', '\\') else: return nextrun(c, wordchars) c = nextch() while c != '\0': while c in pycompat.bytestr(string.whitespace): c = nextch() if c == '.': yield 'n', (r, [p1]) p1 = r r += 1 c = nextch() elif c == '+': c, digs = nextrun(nextch(), pycompat.bytestr(string.digits)) n = int(digs) for i in pycompat.xrange(0, n): yield 'n', (r, [p1]) p1 = r r += 1 elif c in '*/': if c == '*': c = nextch() c, pref = nextstring(c) prefs = [pref] while c == '/': c, pref = nextstring(nextch()) prefs.append(pref) ps = [resolve(ref) for ref in prefs] yield 'n', (r, ps) p1 = r r += 1 elif c == '<': c, ref = nextstring(nextch()) p1 = resolve(ref) elif c == ':': c, name = nextstring(nextch()) labels[name] = p1 yield 'l', (p1, name) elif c == '@': c, text = nextstring(nextch()) yield 'a', text elif c == '!': c = nextch() if c == '!': cmd = '' c = nextch() while c not in '\n\r\0': cmd += c c = nextch() yield 'C', cmd else: c, cmd = nextstring(c) yield 'c', cmd elif c == '#': while c not in '\n\r\0': c = nextch() elif c == '$': p1 = -1 c = nextch() elif c == '\0': return # in case it was preceded by whitespace else: s = '' i = 0 while c != '\0' and i < 10: s += c i += 1 c = nextch() raise error.Abort(_('invalid character in dag description: ' '%s...') % s) def dagtextlines(events, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates single lines for dagtext()''' def wrapstring(text): if re.match("^[0-9a-z]*$", text): return text return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"' def gen(): labels = {} run = 0 wantr = 0 needroot = False for kind, data in events: if kind == 'n': r, ps = data # sanity check if r != wantr: raise error.Abort(_("expected id %i, got %i") % (wantr, r)) if not ps: ps = [-1] else: for p in ps: if p >= r: raise error.Abort(_("parent id %i is larger than " "current id %i") % (p, r)) wantr += 1 # new root? p1 = r - 1 if len(ps) == 1 and ps[0] == -1: if needroot: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' yield '$' p1 = -1 else: needroot = True if len(ps) == 1 and ps[0] == p1: if usedots: yield "." else: run += 1 else: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' prefs = [] for p in ps: if p == p1: prefs.append('') elif p in labels: prefs.append(labels[p]) else: prefs.append('%d' % (r - p)) yield '*' + '/'.join(prefs) else: if run: yield '+%d' % run run = 0 if kind == 'l': rid, name = data labels[rid] = name yield ':' + name if wraplabels: yield '\n' elif kind == 'c': yield '!' + wrapstring(data) if wrapcommands: yield '\n' elif kind == 'C': yield '!!' + data yield '\n' elif kind == 'a': if wrapannotations: yield '\n' yield '@' + wrapstring(data) elif kind == '#': yield '#' + data yield '\n' else: raise error.Abort(_("invalid event type in dag: " "('%s', '%s')") % (stringutil.escapestr(kind), stringutil.escapestr(data))) if run: yield '+%d' % run line = '' for part in gen(): if part == '\n': if line: yield line line = '' else: if len(line) + len(part) >= maxlinewidth: yield line line = '' elif addspaces and line and part != '.': line += ' ' line += part if line: yield line def dagtext(dag, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates lines of a textual representation for a dag event stream events should generate what parsedag() does, so: ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', text) for commands ('C', text) for line commands ('!!') ('#', text) for comment lines Parent nodes must come before child nodes. Examples -------- Linear run: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0]))]) '+2' Two roots: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [-1]))]) '+1 $ +1' Fork and join: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0])), (b'n', (2, [0])), ... (b'n', (3, [2, 1]))]) '+2 *2 */2' Fork and join with labels: >>> dagtext([(b'n', (0, [-1])), (b'l', (0, b'f')), (b'n', (1, [0])), ... (b'l', (1, b'p2')), (b'n', (2, [0])), (b'n', (3, [2, 1]))]) '+1 :f +1 :p2 *f */p2' Annotations: >>> dagtext([(b'n', (0, [-1])), (b'a', b'ann'), (b'n', (1, [0]))]) '+1 @ann +1' >>> dagtext([(b'n', (0, [-1])), ... (b'a', b'my annotation'), ... (b'n', (1, [0]))]) '+1 @"my annotation" +1' Commands: >>> dagtext([(b'n', (0, [-1])), (b'c', b'cmd'), (b'n', (1, [0]))]) '+1 !cmd +1' >>> dagtext([(b'n', (0, [-1])), ... (b'c', b'my command'), ... (b'n', (1, [0]))]) '+1 !"my command" +1' >>> dagtext([(b'n', (0, [-1])), ... (b'C', b'my command line'), ... (b'n', (1, [0]))]) '+1 !!my command line\\n+1' Comments: >>> dagtext([(b'n', (0, [-1])), (b'#', b' comment'), (b'n', (1, [0]))]) '+1 # comment\\n+1' >>> dagtext([]) '' Combining parsedag and dagtext: >>> dagtext(parsedag(b'+1 :f +1 :p2 *f */p2')) '+1 :f +1 :p2 *f */p2' ''' return "\n".join(dagtextlines(dag, addspaces, wraplabels, wrapannotations, wrapcommands, wrapnonlinear, usedots, maxlinewidth))