HGRC(5)
=======
Bryan O'Sullivan <bos@serpentine.com>
NAME
----
hgrc - configuration files for Mercurial
SYNOPSIS
--------
The Mercurial system uses a set of configuration files to control
aspects of its behaviour.
FILES
-----
Mercurial reads configuration data from several files, if they exist.
The names of these files depend on the system on which Mercurial is
installed. `*.rc` files from a single directory are read in alphabetical
order, later ones overriding earlier ones. Where multiple paths are
given below, settings from later paths override earlier ones.
(Unix) `<install-root>/etc/mercurial/hgrc.d/*.rc`::
(Unix) `<install-root>/etc/mercurial/hgrc`::
Per-installation configuration files, searched for in the
directory where Mercurial is installed. `<install-root>` is the
parent directory of the hg executable (or symlink) being run. For
example, if installed in `/shared/tools/bin/hg`, Mercurial will look
in `/shared/tools/etc/mercurial/hgrc`. Options in these files apply
to all Mercurial commands executed by any user in any directory.
(Unix) `/etc/mercurial/hgrc.d/*.rc`::
(Unix) `/etc/mercurial/hgrc`::
Per-system configuration files, for the system on which Mercurial
is running. Options in these files apply to all Mercurial commands
executed by any user in any directory. Options in these files
override per-installation options.
(Windows) `<install-dir>\Mercurial.ini`::
or else::
(Windows) `HKEY_LOCAL_MACHINE\SOFTWARE\Mercurial`::
or else::
(Windows) `C:\Mercurial\Mercurial.ini`::
Per-installation/system configuration files, for the system on
which Mercurial is running. Options in these files apply to all
Mercurial commands executed by any user in any directory. Registry
keys contain PATH-like strings, every part of which must reference
a `Mercurial.ini` file or be a directory where `*.rc` files will be
read.
(Unix) `$HOME/.hgrc`::
(Windows) `%HOME%\Mercurial.ini`::
(Windows) `%HOME%\.hgrc`::
(Windows) `%USERPROFILE%\Mercurial.ini`::
(Windows) `%USERPROFILE%\.hgrc`::
Per-user configuration file(s), for the user running Mercurial. On
Windows 9x, `%HOME%` is replaced by `%APPDATA%`.
Options in these files apply to all Mercurial commands executed by
this user in any directory. Options in thes files override
per-installation and per-system options.
(Unix, Windows) `<repo>/.hg/hgrc`::
Per-repository configuration options that only apply in a
particular repository. This file is not version-controlled, and
will not get transferred during a "clone" operation. Options in
this file override options in all other configuration files. On
Unix, most of this file will be ignored if it doesn't belong to a
trusted user or to a trusted group. See the documentation for the
trusted section below for more details.
SYNTAX
------
A configuration file consists of sections, led by a "[section]" header
and followed by "name: value" entries; "name=value" is also accepted.
[spam]
eggs=ham
green=
eggs
Each line contains one entry. If the lines that follow are indented,
they are treated as continuations of that entry.
Leading whitespace is removed from values. Empty lines are skipped.
The optional values can contain format strings which refer to other
values in the same section, or values in a special DEFAULT section.
Lines beginning with "#" or ";" are ignored and may be used to provide
comments.
SECTIONS
--------
This section describes the different sections that may appear in a
Mercurial "hgrc" file, the purpose of each section, its possible keys,
and their possible values.
[[alias]]
alias::
Defines command aliases.
Aliases allow you to define your own commands in terms of other
commands (or aliases), optionally including arguments.
+
--
Alias definitions consist of lines of the form:
<alias> = <command> [<argument]...
For example, this definition:
latest = log --limit 5
creates a new command `latest` that shows only the five most recent
changesets. You can define subsequent aliases using earlier ones:
stable5 = latest -b stable
NOTE: It is possible to create aliases with the same names as
existing commands, which will then override the original definitions.
This is almost always a bad idea!
--
[[auth]]
auth::
Authentication credentials for HTTP authentication. Each line has
the following format:
<name>.<argument> = <value>
+
--
where <name> is used to group arguments into authentication entries.
Example:
foo.prefix = hg.intevation.org/mercurial
foo.username = foo
foo.password = bar
foo.schemes = http https
Supported arguments:
prefix;;
Either "`*`" or a URI prefix with or without the scheme part. The
authentication entry with the longest matching prefix is used
(where "`*`" matches everything and counts as a match of length 1).
If the prefix doesn't include a scheme, the match is performed
against the URI with its scheme stripped as well, and the schemes
argument, q.v., is then subsequently consulted.
username;;
Username to authenticate with.
password;;
Optional. Password to authenticate with. If not given the user
will be prompted for it.
schemes;;
Optional. Space separated list of URI schemes to use this
authentication entry with. Only used if the prefix doesn't include
a scheme. Supported schemes are http and https. They will match
static-http and static-https respectively, as well.
Default: https.
If no suitable authentication entry is found, the user is prompted
for credentials as usual if required by the remote.
--
[[decode]]
decode/encode::
Filters for transforming files on checkout/checkin. This would
typically be used for newline processing or other
localization/canonicalization of files.
+
--
Filters consist of a filter pattern followed by a filter command.
Filter patterns are globs by default, rooted at the repository root.
For example, to match any file ending in "`.txt`" in the root
directory only, use the pattern "`*.txt`". To match any file ending in
"`.c`" anywhere in the repository, use the pattern "`**.c`".
The filter command can start with a specifier, either "pipe:" or
"tempfile:". If no specifier is given, "pipe:" is used by default.
A "pipe:" command must accept data on stdin and return the
transformed data on stdout.
Pipe example:
[encode]
# uncompress gzip files on checkin to improve delta compression
# note: not necessarily a good idea, just an example
*.gz = pipe: gunzip
[decode]
# recompress gzip files when writing them to the working dir (we
# can safely omit "pipe:", because it's the default)
*.gz = gzip
A "tempfile:" command is a template. The string INFILE is replaced
with the name of a temporary file that contains the data to be
filtered by the command. The string OUTFILE is replaced with the
name of an empty temporary file, where the filtered data must be
written by the command.
NOTE: the tempfile mechanism is recommended for Windows systems,
where the standard shell I/O redirection operators often have
strange effects and may corrupt the contents of your files.
The most common usage is for LF <-> CRLF translation on Windows. For
this, use the "smart" convertors which check for binary files:
[extensions]
hgext.win32text =
[encode]
** = cleverencode:
[decode]
** = cleverdecode:
or if you only want to translate certain files:
[extensions]
hgext.win32text =
[encode]
**.txt = dumbencode:
[decode]
**.txt = dumbdecode:
--
[[defaults]]
defaults::
Use the [defaults] section to define command defaults, i.e. the
default options/arguments to pass to the specified commands.
+
--
The following example makes 'hg log' run in verbose mode, and 'hg
status' show only the modified files, by default.
[defaults]
log = -v
status = -m
The actual commands, instead of their aliases, must be used when
defining command defaults. The command defaults will also be applied
to the aliases of the commands defined.
--
[[diff]]
diff::
Settings used when displaying diffs. They are all boolean and
defaults to False.
git;;
Use git extended diff format.
nodates;;
Don't include dates in diff headers.
showfunc;;
Show which function each change is in.
ignorews;;
Ignore white space when comparing lines.
ignorewsamount;;
Ignore changes in the amount of white space.
ignoreblanklines;;
Ignore changes whose lines are all blank.
[[email]]
email::
Settings for extensions that send email messages.
from;;
Optional. Email address to use in "From" header and SMTP envelope
of outgoing messages.
to;;
Optional. Comma-separated list of recipients' email addresses.
cc;;
Optional. Comma-separated list of carbon copy recipients'
email addresses.
bcc;;
Optional. Comma-separated list of blind carbon copy recipients'
email addresses. Cannot be set interactively.
method;;
Optional. Method to use to send email messages. If value is "smtp"
(default), use SMTP (see section "[smtp]" for configuration).
Otherwise, use as name of program to run that acts like sendmail
(takes "-f" option for sender, list of recipients on command line,
message on stdin). Normally, setting this to "sendmail" or
"/usr/sbin/sendmail" is enough to use sendmail to send messages.
charsets;;
Optional. Comma-separated list of charsets considered convenient
for recipients. Addresses, headers, and parts not containing
patches of outgoing messages will be encoded in the first charset
to which conversion from local encoding (`$HGENCODING`,
`ui.fallbackencoding`) succeeds. If correct conversion fails, the
text in question is sent as is. Defaults to empty (explicit) list.
+
--
Order of outgoing email charsets:
us-ascii always first, regardless of settings
email.charsets in order given by user
ui.fallbackencoding if not in email.charsets
$HGENCODING if not in email.charsets
utf-8 always last, regardless of settings
Email example:
[email]
from = Joseph User <joe.user@example.com>
method = /usr/sbin/sendmail
# charsets for western europeans
# us-ascii, utf-8 omitted, as they are tried first and last
charsets = iso-8859-1, iso-8859-15, windows-1252
--
[[extensions]]
extensions::
Mercurial has an extension mechanism for adding new features. To
enable an extension, create an entry for it in this section.
+
--
If you know that the extension is already in Python's search path,
you can give the name of the module, followed by "=", with nothing
after the "=".
Otherwise, give a name that you choose, followed by "=", followed by
the path to the ".py" file (including the file name extension) that
defines the extension.
To explicitly disable an extension that is enabled in an hgrc of
broader scope, prepend its path with '!', as in
'hgext.foo = !/ext/path' or 'hgext.foo = !' when path is not
supplied.
Example for `~/.hgrc`:
[extensions]
# (the mq extension will get loaded from mercurial's path)
hgext.mq =
# (this extension will get loaded from the file specified)
myfeature = ~/.hgext/myfeature.py
--
[[format]]
format::
usestore;;
Enable or disable the "store" repository format which improves
compatibility with systems that fold case or otherwise mangle
filenames. Enabled by default. Disabling this option will allow
you to store longer filenames in some situations at the expense of
compatibility and ensures that the on-disk format of newly created
repositories will be compatible with Mercurial before version 0.9.4.
usefncache;;
Enable or disable the "fncache" repository format which enhances
the "store" repository format (which has to be enabled to use
fncache) to allow longer filenames and avoids using Windows
reserved names, e.g. "nul". Enabled by default. Disabling this
option ensures that the on-disk format of newly created
repositories will be compatible with Mercurial before version 1.1.
[[merge-patterns]]
merge-patterns::
This section specifies merge tools to associate with particular file
patterns. Tools matched here will take precedence over the default
merge tool. Patterns are globs by default, rooted at the repository
root.
+
Example:
+
[merge-patterns]
**.c = kdiff3
**.jpg = myimgmerge
[[merge-tools]]
merge-tools::
This section configures external merge tools to use for file-level
merges.
+
--
Example `~/.hgrc`:
[merge-tools]
# Override stock tool location
kdiff3.executable = ~/bin/kdiff3
# Specify command line
kdiff3.args = $base $local $other -o $output
# Give higher priority
kdiff3.priority = 1
# Define new tool
myHtmlTool.args = -m $local $other $base $output
myHtmlTool.regkey = Software\FooSoftware\HtmlMerge
myHtmlTool.priority = 1
Supported arguments:
priority;;
The priority in which to evaluate this tool.
Default: 0.
executable;;
Either just the name of the executable or its pathname.
Default: the tool name.
args;;
The arguments to pass to the tool executable. You can refer to the
files being merged as well as the output file through these
variables: `$base`, `$local`, `$other`, `$output`.
Default: `$local $base $other`
premerge;;
Attempt to run internal non-interactive 3-way merge tool before
launching external tool.
Default: True
binary;;
This tool can merge binary files. Defaults to False, unless tool
was selected by file pattern match.
symlink;;
This tool can merge symlinks. Defaults to False, even if tool was
selected by file pattern match.
checkconflicts;;
Check whether there are conflicts even though the tool reported
success.
Default: False
checkchanged;;
Check whether outputs were written even though the tool reported
success.
Default: False
fixeol;;
Attempt to fix up EOL changes caused by the merge tool.
Default: False
gui;;
This tool requires a graphical interface to run. Default: False
regkey;;
Windows registry key which describes install location of this
tool. Mercurial will search for this key first under
`HKEY_CURRENT_USER` and then under `HKEY_LOCAL_MACHINE`.
Default: None
regname;;
Name of value to read from specified registry key. Defaults to the
unnamed (default) value.
regappend;;
String to append to the value read from the registry, typically
the executable name of the tool.
Default: None
--
[[hooks]]
hooks::
Commands or Python functions that get automatically executed by
various actions such as starting or finishing a commit. Multiple
hooks can be run for the same action by appending a suffix to the
action. Overriding a site-wide hook can be done by changing its
value or setting it to an empty string.
+
--
Example `.hg/hgrc`:
[hooks]
# do not use the site-wide hook
incoming =
incoming.email = /my/email/hook
incoming.autobuild = /my/build/hook
Most hooks are run with environment variables set that give useful
additional information. For each hook below, the environment
variables it is passed are listed with names of the form "$HG_foo".
changegroup;;
Run after a changegroup has been added via push, pull or unbundle.
ID of the first new changeset is in `$HG_NODE`. URL from which
changes came is in `$HG_URL`.
commit;;
Run after a changeset has been created in the local repository. ID
of the newly created changeset is in `$HG_NODE`. Parent changeset
IDs are in `$HG_PARENT1` and `$HG_PARENT2`.
incoming;;
Run after a changeset has been pulled, pushed, or unbundled into
the local repository. The ID of the newly arrived changeset is in
`$HG_NODE`. URL that was source of changes came is in `$HG_URL`.
outgoing;;
Run after sending changes from local repository to another. ID of
first changeset sent is in `$HG_NODE`. Source of operation is in
`$HG_SOURCE`; see "preoutgoing" hook for description.
post-<command>;;
Run after successful invocations of the associated command. The
contents of the command line are passed as `$HG_ARGS` and the result
code in `$HG_RESULT`. Hook failure is ignored.
pre-<command>;;
Run before executing the associated command. The contents of the
command line are passed as `$HG_ARGS`. If the hook returns failure,
the command doesn't execute and Mercurial returns the failure
code.
prechangegroup;;
Run before a changegroup is added via push, pull or unbundle. Exit
status 0 allows the changegroup to proceed. Non-zero status will
cause the push, pull or unbundle to fail. URL from which changes
will come is in `$HG_URL`.
precommit;;
Run before starting a local commit. Exit status 0 allows the
commit to proceed. Non-zero status will cause the commit to fail.
Parent changeset IDs are in `$HG_PARENT1` and `$HG_PARENT2`.
preoutgoing;;
Run before collecting changes to send from the local repository to
another. Non-zero status will cause failure. This lets you prevent
pull over http or ssh. Also prevents against local pull, push
(outbound) or bundle commands, but not effective, since you can
just copy files instead then. Source of operation is in
`$HG_SOURCE`. If "serve", operation is happening on behalf of remote
ssh or http repository. If "push", "pull" or "bundle", operation
is happening on behalf of repository on same system.
pretag;;
Run before creating a tag. Exit status 0 allows the tag to be
created. Non-zero status will cause the tag to fail. ID of
changeset to tag is in `$HG_NODE`. Name of tag is in `$HG_TAG`. Tag is
local if `$HG_LOCAL=1`, in repo if `$HG_LOCAL=0`.
pretxnchangegroup;;
Run after a changegroup has been added via push, pull or unbundle,
but before the transaction has been committed. Changegroup is
visible to hook program. This lets you validate incoming changes
before accepting them. Passed the ID of the first new changeset in
`$HG_NODE`. Exit status 0 allows the transaction to commit. Non-zero
status will cause the transaction to be rolled back and the push,
pull or unbundle will fail. URL that was source of changes is in
`$HG_URL`.
pretxncommit;;
Run after a changeset has been created but the transaction not yet
committed. Changeset is visible to hook program. This lets you
validate commit message and changes. Exit status 0 allows the
commit to proceed. Non-zero status will cause the transaction to
be rolled back. ID of changeset is in `$HG_NODE`. Parent changeset
IDs are in `$HG_PARENT1` and `$HG_PARENT2`.
preupdate;;
Run before updating the working directory. Exit status 0 allows
the update to proceed. Non-zero status will prevent the update.
Changeset ID of first new parent is in `$HG_PARENT1`. If merge, ID
of second new parent is in `$HG_PARENT2`.
tag;;
Run after a tag is created. ID of tagged changeset is in `$HG_NODE`.
Name of tag is in `$HG_TAG`. Tag is local if `$HG_LOCAL=1`, in repo if
`$HG_LOCAL=0`.
update;;
Run after updating the working directory. Changeset ID of first
new parent is in `$HG_PARENT1`. If merge, ID of second new parent is
in `$HG_PARENT2`. If the update succeeded, `$HG_ERROR=0`. If the
update failed (e.g. because conflicts not resolved), `$HG_ERROR=1`.
NOTE: it is generally better to use standard hooks rather than the
generic pre- and post- command hooks as they are guaranteed to be
called in the appropriate contexts for influencing transactions.
Also, hooks like "commit" will be called in all contexts that
generate a commit (e.g. tag) and not just the commit command.
NOTE: Environment variables with empty values may not be passed to
hooks on platforms such as Windows. As an example, `$HG_PARENT2` will
have an empty value under Unix-like platforms for non-merge
changesets, while it will not be available at all under Windows.
The syntax for Python hooks is as follows:
hookname = python:modulename.submodule.callable
hookname = python:/path/to/python/module.py:callable
Python hooks are run within the Mercurial process. Each hook is
called with at least three keyword arguments: a ui object (keyword
"ui"), a repository object (keyword "repo"), and a "hooktype"
keyword that tells what kind of hook is used. Arguments listed as
environment variables above are passed as keyword arguments, with no
"HG_" prefix, and names in lower case.
If a Python hook returns a "true" value or raises an exception, this
is treated as a failure.
--
[[http_proxy]]
http_proxy::
Used to access web-based Mercurial repositories through a HTTP
proxy.
host;;
Host name and (optional) port of the proxy server, for example
"myproxy:8000".
no;;
Optional. Comma-separated list of host names that should bypass
the proxy.
passwd;;
Optional. Password to authenticate with at the proxy server.
user;;
Optional. User name to authenticate with at the proxy server.
[[smtp]]
smtp::
Configuration for extensions that need to send email messages.
host;;
Host name of mail server, e.g. "mail.example.com".
port;;
Optional. Port to connect to on mail server. Default: 25.
tls;;
Optional. Whether to connect to mail server using TLS. True or
False. Default: False.
username;;
Optional. User name to authenticate to SMTP server with. If
username is specified, password must also be specified.
Default: none.
password;;
Optional. Password to authenticate to SMTP server with. If
username is specified, password must also be specified.
Default: none.
local_hostname;;
Optional. It's the hostname that the sender can use to identify
itself to the MTA.
[[paths]]
paths::
Assigns symbolic names to repositories. The left side is the
symbolic name, and the right gives the directory or URL that is the
location of the repository. Default paths can be declared by setting
the following entries.
default;;
Directory or URL to use when pulling if no source is specified.
Default is set to repository from which the current repository was
cloned.
default-push;;
Optional. Directory or URL to use when pushing if no destination
is specified.
[[profiling]]
profiling::
Specifies profiling format and file output. In this section
description, 'profiling data' stands for the raw data collected
during profiling, while 'profiling report' stands for a statistical
text report generated from the profiling data. The profiling is done
using lsprof.
format;;
Profiling format.
Default: text.
text;;
Generate a profiling report. When saving to a file, it should be
noted that only the report is saved, and the profiling data is
not kept.
kcachegrind;;
Format profiling data for kcachegrind use: when saving to a
file, the generated file can directly be loaded into
kcachegrind.
output;;
File path where profiling data or report should be saved. If the
file exists, it is replaced. Default: None, data is printed on
stderr
[[server]]
server::
Controls generic server settings.
uncompressed;;
Whether to allow clients to clone a repo using the uncompressed
streaming protocol. This transfers about 40% more data than a
regular clone, but uses less memory and CPU on both server and
client. Over a LAN (100Mbps or better) or a very fast WAN, an
uncompressed streaming clone is a lot faster (~10x) than a regular
clone. Over most WAN connections (anything slower than about
6Mbps), uncompressed streaming is slower, because of the extra
data transfer overhead. Default is False.
[[trusted]]
trusted::
For security reasons, Mercurial will not use the settings in the
`.hg/hgrc` file from a repository if it doesn't belong to a trusted
user or to a trusted group. The main exception is the web interface,
which automatically uses some safe settings, since it's common to
serve repositories from different users.
+
--
This section specifies what users and groups are trusted. The
current user is always trusted. To trust everybody, list a user or a
group with name "*".
users;;
Comma-separated list of trusted users.
groups;;
Comma-separated list of trusted groups.
--
[[ui]]
ui::
User interface controls.
+
--
archivemeta;;
Whether to include the .hg_archival.txt file containing metadata
(hashes for the repository base and for tip) in archives created
by the hg archive command or downloaded via hgweb.
Default is true.
askusername;;
Whether to prompt for a username when committing. If True, and
neither `$HGUSER` nor `$EMAIL` has been specified, then the user will
be prompted to enter a username. If no username is entered, the
default USER@HOST is used instead.
Default is False.
debug;;
Print debugging information. True or False. Default is False.
editor;;
The editor to use during a commit. Default is `$EDITOR` or "vi".
fallbackencoding;;
Encoding to try if it's not possible to decode the changelog using
UTF-8. Default is ISO-8859-1.
ignore;;
A file to read per-user ignore patterns from. This file should be
in the same format as a repository-wide .hgignore file. This
option supports hook syntax, so if you want to specify multiple
ignore files, you can do so by setting something like
"ignore.other = ~/.hgignore2". For details of the ignore file
format, see the hgignore(5) man page.
interactive;;
Allow to prompt the user. True or False. Default is True.
logtemplate;;
Template string for commands that print changesets.
merge;;
The conflict resolution program to use during a manual merge.
There are some internal tools available:
+
internal:local;;
keep the local version
internal:other;;
use the other version
internal:merge;;
use the internal non-interactive merge tool
internal:fail;;
fail to merge
+
For more information on configuring merge tools see the
merge-tools section.
patch;;
command to use to apply patches. Look for 'gpatch' or 'patch' in
PATH if unset.
quiet;;
Reduce the amount of output printed. True or False. Default is False.
remotecmd;;
remote command to use for clone/push/pull operations. Default is 'hg'.
report_untrusted;;
Warn if a `.hg/hgrc` file is ignored due to not being owned by a
trusted user or group. True or False. Default is True.
slash;;
Display paths using a slash ("/") as the path separator. This only
makes a difference on systems where the default path separator is
not the slash character (e.g. Windows uses the backslash character
("\")).
Default is False.
ssh;;
command to use for SSH connections. Default is 'ssh'.
strict;;
Require exact command names, instead of allowing unambiguous
abbreviations. True or False. Default is False.
style;;
Name of style to use for command output.
timeout;;
The timeout used when a lock is held (in seconds), a negative value
means no timeout. Default is 600.
username;;
The committer of a changeset created when running "commit".
Typically a person's name and email address, e.g. "Fred Widget
<fred@example.com>". Default is `$EMAIL` or username@hostname. If
the username in hgrc is empty, it has to be specified manually or
in a different hgrc file (e.g. `$HOME/.hgrc`, if the admin set
"username =" in the system hgrc).
verbose;;
Increase the amount of output printed. True or False. Default is False.
--
[[web]]
web::
Web interface configuration.
accesslog;;
Where to output the access log. Default is stdout.
address;;
Interface address to bind to. Default is all.
allow_archive;;
List of archive format (bz2, gz, zip) allowed for downloading.
Default is empty.
allowbz2;;
(DEPRECATED) Whether to allow .tar.bz2 downloading of repo revisions.
Default is false.
allowgz;;
(DEPRECATED) Whether to allow .tar.gz downloading of repo revisions.
Default is false.
allowpull;;
Whether to allow pulling from the repository. Default is true.
allow_push;;
Whether to allow pushing to the repository. If empty or not set,
push is not allowed. If the special value "*", any remote user can
push, including unauthenticated users. Otherwise, the remote user
must have been authenticated, and the authenticated user name must
be present in this list (separated by whitespace or ","). The
contents of the allow_push list are examined after the deny_push
list.
allow_read;;
If the user has not already been denied repository access due to
the contents of deny_read, this list determines whether to grant
repository access to the user. If this list is not empty, and the
user is unauthenticated or not present in the list (separated by
whitespace or ","), then access is denied for the user. If the
list is empty or not set, then access is permitted to all users by
default. Setting allow_read to the special value "*" is equivalent
to it not being set (i.e. access is permitted to all users). The
contents of the allow_read list are examined after the deny_read
list.
allowzip;;
(DEPRECATED) Whether to allow .zip downloading of repo revisions.
Default is false. This feature creates temporary files.
baseurl;;
Base URL to use when publishing URLs in other locations, so
third-party tools like email notification hooks can construct
URLs. Example: "http://hgserver/repos/"
contact;;
Name or email address of the person in charge of the repository.
Defaults to ui.username or `$EMAIL` or "unknown" if unset or empty.
deny_push;;
Whether to deny pushing to the repository. If empty or not set,
push is not denied. If the special value "*", all remote users are
denied push. Otherwise, unauthenticated users are all denied, and
any authenticated user name present in this list (separated by
whitespace or ",") is also denied. The contents of the deny_push
list are examined before the allow_push list.
deny_read;;
Whether to deny reading/viewing of the repository. If this list is
not empty, unauthenticated users are all denied, and any
authenticated user name present in this list (separated by
whitespace or ",") is also denied access to the repository. If set
to the special value "*", all remote users are denied access
(rarely needed ;). If deny_read is empty or not set, the
determination of repository access depends on the presence and
content of the allow_read list (see description). If both
deny_read and allow_read are empty or not set, then access is
permitted to all users by default. If the repository is being
served via hgwebdir, denied users will not be able to see it in
the list of repositories. The contents of the deny_read list have
priority over (are examined before) the contents of the allow_read
list.
description;;
Textual description of the repository's purpose or contents.
Default is "unknown".
encoding;;
Character encoding name.
Example: "UTF-8"
errorlog;;
Where to output the error log. Default is stderr.
hidden;;
Whether to hide the repository in the hgwebdir index.
Default is false.
ipv6;;
Whether to use IPv6. Default is false.
name;;
Repository name to use in the web interface. Default is current
working directory.
maxchanges;;
Maximum number of changes to list on the changelog. Default is 10.
maxfiles;;
Maximum number of files to list per changeset. Default is 10.
port;;
Port to listen on. Default is 8000.
prefix;;
Prefix path to serve from. Default is '' (server root).
push_ssl;;
Whether to require that inbound pushes be transported over SSL to
prevent password sniffing. Default is true.
staticurl;;
Base URL to use for static files. If unset, static files (e.g. the
hgicon.png favicon) will be served by the CGI script itself. Use
this setting to serve them directly with the HTTP server.
Example: "http://hgserver/static/"
stripes;;
How many lines a "zebra stripe" should span in multiline output.
Default is 1; set to 0 to disable.
style;;
Which template map style to use.
templates;;
Where to find the HTML templates. Default is install path.
AUTHOR
------
Bryan O'Sullivan <bos@serpentine.com>.
Mercurial was written by Matt Mackall <mpm@selenic.com>.
SEE ALSO
--------
hg(1), hgignore(5)
COPYING
-------
This manual page is copyright 2005 Bryan O'Sullivan.
Mercurial is copyright 2005-2007 Matt Mackall.
Free use of this software is granted under the terms of the GNU General
Public License (GPL).