view tests/test-ssh.t @ 15897:cc021114fc98

hg-ssh: use shlex for shell-like parsing of SSH_ORIGINAL_COMMAND

The Mercurial ssh protocol is defined as if it was ssh-ing to a shell account on
an ordinary ssh server, and where hg was available in $PATH and it executed
the command "hg -R REPOPATH serve --stdio".

The Mercurial ssh client can in most cases just pass REPOPATH to the shell, but
if it contains unsafe characters the client will have to quote it so the shell
will pass the right -R value to hg. Correct quoting of repopaths was introduced
in d8fa35c28335 and tweaked in 86fc364ca5f8.

hg-ssh doesn't create the command via a shell and used a simple parser instead.
It worked fine for simple paths without any quoting, but if any kind of quoting
was used it failed to parse the command like the shell would do it.

This makes hg-ssh behave more like a normal shell with hg in the path would do.

This test tries to exercise the ssh functionality with a dummy script

creating 'remote' repo

  $ hg init remote
  $ cd remote
  $ echo this > foo
  $ echo this > fooO
  $ hg ci -A -m "init" foo fooO
  $ cat <<EOF > .hg/hgrc
  > [server]
  > uncompressed = True
  > 
  > [hooks]
  > changegroup = python "$TESTDIR"/printenv.py changegroup-in-remote 0 ../dummylog
  > EOF
  $ cd ..

repo not found error

  $ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/nonexistent local
  remote: abort: There is no Mercurial repository here (.hg not found)!
  abort: no suitable response from remote hg!
  [255]

non-existent absolute path

  $ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy//`pwd`/nonexistent local
  remote: abort: There is no Mercurial repository here (.hg not found)!
  abort: no suitable response from remote hg!
  [255]

clone remote via stream

  $ hg clone -e "python $TESTDIR/dummyssh" --uncompressed ssh://user@dummy/remote local-stream
  streaming all changes
  4 files to transfer, 392 bytes of data
  transferred 392 bytes in * seconds (*/sec) (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local-stream
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 1 changesets, 2 total revisions
  $ cd ..

clone remote via pull

  $ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/remote local
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

verify

  $ cd local
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 1 changesets, 2 total revisions
  $ echo '[hooks]' >> .hg/hgrc
  $ echo 'changegroup = python "$TESTDIR"/printenv.py changegroup-in-local 0 ../dummylog' >> .hg/hgrc

empty default pull

  $ hg paths
  default = ssh://user@dummy/remote
  $ hg pull -e "python $TESTDIR/dummyssh"
  pulling from ssh://user@dummy/remote
  searching for changes
  no changes found

local change

  $ echo bleah > foo
  $ hg ci -m "add"

updating rc

  $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
  $ echo "[ui]" >> .hg/hgrc
  $ echo "ssh = python $TESTDIR/dummyssh" >> .hg/hgrc

find outgoing

  $ hg out ssh://user@dummy/remote
  comparing with ssh://user@dummy/remote
  searching for changes
  changeset:   1:a28a9d1a809c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

find incoming on the remote side

  $ hg incoming -R ../remote -e "python $TESTDIR/dummyssh" ssh://user@dummy/local
  comparing with ssh://user@dummy/local
  searching for changes
  changeset:   1:a28a9d1a809c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

find incoming on the remote side (using absolute path)

  $ hg incoming -R ../remote -e "python $TESTDIR/dummyssh" "ssh://user@dummy/`pwd`"
  comparing with ssh://user@dummy/$TESTTMP/local
  searching for changes
  changeset:   1:a28a9d1a809c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

push

  $ hg push
  pushing to ssh://user@dummy/remote
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ cd ../remote

check remote tip

  $ hg tip
  changeset:   1:a28a9d1a809c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 3 total revisions
  $ hg cat -r tip foo
  bleah
  $ echo z > z
  $ hg ci -A -m z z
  created new head

test pushkeys and bookmarks

  $ cd ../local
  $ hg debugpushkey --config ui.ssh="python $TESTDIR/dummyssh" ssh://user@dummy/remote namespaces
  bookmarks	
  phases	
  namespaces	
  $ hg book foo -r 0
  $ hg out -B
  comparing with ssh://user@dummy/remote
  searching for changed bookmarks
     foo                       1160648e36ce
  $ hg push -B foo
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  exporting bookmark foo
  $ hg debugpushkey --config ui.ssh="python $TESTDIR/dummyssh" ssh://user@dummy/remote bookmarks
  foo	1160648e36cec0054048a7edc4110c6f84fde594
  $ hg book -f foo
  $ hg push --traceback
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  updating bookmark foo
  $ hg book -d foo
  $ hg in -B
  comparing with ssh://user@dummy/remote
  searching for changed bookmarks
     foo                       a28a9d1a809c
  $ hg book -f -r 0 foo
  $ hg pull -B foo
  pulling from ssh://user@dummy/remote
  no changes found
  updating bookmark foo
  importing bookmark foo
  $ hg book -d foo
  $ hg push -B foo
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  deleting remote bookmark foo

a bad, evil hook that prints to stdout

  $ cat <<EOF > $TESTTMP/badhook
  > import sys
  > sys.stdout.write("KABOOM\n")
  > EOF

  $ echo '[hooks]' >> ../remote/.hg/hgrc
  $ echo "changegroup.stdout = python $TESTTMP/badhook" >> ../remote/.hg/hgrc
  $ echo r > r
  $ hg ci -A -m z r

push should succeed even though it has an unexpected response

  $ hg push
  pushing to ssh://user@dummy/remote
  searching for changes
  note: unsynced remote changes!
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: KABOOM
  $ hg -R ../remote heads
  changeset:   3:1383141674ec
  tag:         tip
  parent:      1:a28a9d1a809c
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     z
  
  changeset:   2:6c0482d977a3
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     z
  

clone bookmarks

  $ hg -R ../remote bookmark test
  $ hg -R ../remote bookmarks
   * test                      2:6c0482d977a3
  $ hg clone -e "python $TESTDIR/dummyssh" ssh://user@dummy/remote local-bookmarks
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 4 files (+1 heads)
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R local-bookmarks bookmarks
     test                      2:6c0482d977a3

passwords in ssh urls are not supported
(we use a glob here because different Python versions give different
results here)

  $ hg push ssh://user:erroneouspwd@dummy/remote
  pushing to ssh://user:*@dummy/remote (glob)
  abort: password in URL not supported!
  [255]

  $ cd ..

Test remote paths with spaces (issue2983):

  $ hg init --ssh "python $TESTDIR/dummyssh" "ssh://user@dummy/a repo"
  $ hg -R 'a repo' tag tag
  $ hg id --ssh "python $TESTDIR/dummyssh" "ssh://user@dummy/a repo"
  3fb238f49e8c

Test hg-ssh:

  $ SSH_ORIGINAL_COMMAND="'hg' -R 'a repo' serve --stdio" hg id --ssh "python \"$TESTDIR\"/../contrib/hg-ssh \"$TESTTMP/a repo\"" "ssh://user@dummy/a repo"
  3fb238f49e8c
  $ SSH_ORIGINAL_COMMAND="'hg' -R 'a repo' serve --stdio" hg id --ssh "python \"$TESTDIR\"/../contrib/hg-ssh \"$TESTTMP\"" "ssh://user@dummy/a repo"
  remote: Illegal repository '$TESTTMP/a repo'
  abort: no suitable response from remote hg!
  [255]
  $ SSH_ORIGINAL_COMMAND="'hg' -R 'a'repo' serve --stdio" hg id --ssh "python \"$TESTDIR\"/../contrib/hg-ssh \"$TESTTMP\"" "ssh://user@dummy/a repo"
  remote: Illegal command "'hg' -R 'a'repo' serve --stdio": No closing quotation
  abort: no suitable response from remote hg!
  [255]

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
  Got arguments 1:user@dummy 2:hg -R /$TESTTMP/nonexistent serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R local serve --stdio
  Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  changegroup-in-remote hook: HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1 
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  changegroup-in-remote hook: HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1 
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg init 'a repo'
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio