filemerge: add config knob to check capabilities of internal merge tools
For historical reason, Mercurial assumes capabilities of internal
merge tools as below while examining rules to decide merge tool,
regardless of actual capabilities of them.
=============== ====== ========
specified via binary symlinks
=============== ====== ========
--tool o o
HGMERGE o o
merge-patterns o (*) x (*)
ui.merge x (*) x (*)
=============== ====== ========
This causes:
- unintentional internal merge tool is chosen for binary files via
merge-patterns section of configuration file
- explicit configuration of internal merge tool for symlinks is
ignored unintentionally
But on the other hand, simple "check capability strictly" might break
backward compatibility (e.g. existing merge automations), because it
changes the result of merge tool selection.
Therefore, this patch adds config knob "merge.strict-capability-check"
to control whether capabilities of internal merge tools should be
checked strictly or not.
If this configuration is true, capabilities of internal merge tools
are checked strictly in (*) cases above.
# utility for color output for Mercurial commands
#
# Copyright (C) 2007 Kevin Christen <kevin.christen@gmail.com> and other
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import re
from .i18n import _
from . import (
encoding,
pycompat,
)
from .utils import (
stringutil,
)
try:
import curses
# Mapping from effect name to terminfo attribute name (or raw code) or
# color number. This will also force-load the curses module.
_baseterminfoparams = {
'none': (True, 'sgr0', ''),
'standout': (True, 'smso', ''),
'underline': (True, 'smul', ''),
'reverse': (True, 'rev', ''),
'inverse': (True, 'rev', ''),
'blink': (True, 'blink', ''),
'dim': (True, 'dim', ''),
'bold': (True, 'bold', ''),
'invisible': (True, 'invis', ''),
'italic': (True, 'sitm', ''),
'black': (False, curses.COLOR_BLACK, ''),
'red': (False, curses.COLOR_RED, ''),
'green': (False, curses.COLOR_GREEN, ''),
'yellow': (False, curses.COLOR_YELLOW, ''),
'blue': (False, curses.COLOR_BLUE, ''),
'magenta': (False, curses.COLOR_MAGENTA, ''),
'cyan': (False, curses.COLOR_CYAN, ''),
'white': (False, curses.COLOR_WHITE, ''),
}
except ImportError:
curses = None
_baseterminfoparams = {}
# start and stop parameters for effects
_effects = {
'none': 0,
'black': 30,
'red': 31,
'green': 32,
'yellow': 33,
'blue': 34,
'magenta': 35,
'cyan': 36,
'white': 37,
'bold': 1,
'italic': 3,
'underline': 4,
'inverse': 7,
'dim': 2,
'black_background': 40,
'red_background': 41,
'green_background': 42,
'yellow_background': 43,
'blue_background': 44,
'purple_background': 45,
'cyan_background': 46,
'white_background': 47,
}
_defaultstyles = {
'grep.match': 'red bold',
'grep.linenumber': 'green',
'grep.rev': 'green',
'grep.change': 'green',
'grep.sep': 'cyan',
'grep.filename': 'magenta',
'grep.user': 'magenta',
'grep.date': 'magenta',
'addremove.added': 'green',
'addremove.removed': 'red',
'bookmarks.active': 'green',
'branches.active': 'none',
'branches.closed': 'black bold',
'branches.current': 'green',
'branches.inactive': 'none',
'diff.changed': 'white',
'diff.deleted': 'red',
'diff.deleted.changed': 'red bold underline',
'diff.deleted.unchanged': 'red',
'diff.diffline': 'bold',
'diff.extended': 'cyan bold',
'diff.file_a': 'red bold',
'diff.file_b': 'green bold',
'diff.hunk': 'magenta',
'diff.inserted': 'green',
'diff.inserted.changed': 'green bold underline',
'diff.inserted.unchanged': 'green',
'diff.tab': '',
'diff.trailingwhitespace': 'bold red_background',
'changeset.public': '',
'changeset.draft': '',
'changeset.secret': '',
'diffstat.deleted': 'red',
'diffstat.inserted': 'green',
'formatvariant.name.mismatchconfig': 'red',
'formatvariant.name.mismatchdefault': 'yellow',
'formatvariant.name.uptodate': 'green',
'formatvariant.repo.mismatchconfig': 'red',
'formatvariant.repo.mismatchdefault': 'yellow',
'formatvariant.repo.uptodate': 'green',
'formatvariant.config.special': 'yellow',
'formatvariant.config.default': 'green',
'formatvariant.default': '',
'histedit.remaining': 'red bold',
'ui.error': 'red',
'ui.prompt': 'yellow',
'log.changeset': 'yellow',
'patchbomb.finalsummary': '',
'patchbomb.from': 'magenta',
'patchbomb.to': 'cyan',
'patchbomb.subject': 'green',
'patchbomb.diffstats': '',
'rebase.rebased': 'blue',
'rebase.remaining': 'red bold',
'resolve.resolved': 'green bold',
'resolve.unresolved': 'red bold',
'shelve.age': 'cyan',
'shelve.newest': 'green bold',
'shelve.name': 'blue bold',
'status.added': 'green bold',
'status.clean': 'none',
'status.copied': 'none',
'status.deleted': 'cyan bold underline',
'status.ignored': 'black bold',
'status.modified': 'blue bold',
'status.removed': 'red bold',
'status.unknown': 'magenta bold underline',
'tags.normal': 'green',
'tags.local': 'black bold',
}
def loadcolortable(ui, extname, colortable):
_defaultstyles.update(colortable)
def _terminfosetup(ui, mode, formatted):
'''Initialize terminfo data and the terminal if we're in terminfo mode.'''
# If we failed to load curses, we go ahead and return.
if curses is None:
return
# Otherwise, see what the config file says.
if mode not in ('auto', 'terminfo'):
return
ui._terminfoparams.update(_baseterminfoparams)
for key, val in ui.configitems('color'):
if key.startswith('color.'):
newval = (False, int(val), '')
ui._terminfoparams[key[6:]] = newval
elif key.startswith('terminfo.'):
newval = (True, '', val.replace('\\E', '\x1b'))
ui._terminfoparams[key[9:]] = newval
try:
curses.setupterm()
except curses.error as e:
ui._terminfoparams.clear()
return
for key, (b, e, c) in ui._terminfoparams.copy().items():
if not b:
continue
if not c and not curses.tigetstr(pycompat.sysstr(e)):
# Most terminals don't support dim, invis, etc, so don't be
# noisy and use ui.debug().
ui.debug("no terminfo entry for %s\n" % e)
del ui._terminfoparams[key]
if not curses.tigetstr(r'setaf') or not curses.tigetstr(r'setab'):
# Only warn about missing terminfo entries if we explicitly asked for
# terminfo mode and we're in a formatted terminal.
if mode == "terminfo" and formatted:
ui.warn(_("no terminfo entry for setab/setaf: reverting to "
"ECMA-48 color\n"))
ui._terminfoparams.clear()
def setup(ui):
"""configure color on a ui
That function both set the colormode for the ui object and read
the configuration looking for custom colors and effect definitions."""
mode = _modesetup(ui)
ui._colormode = mode
if mode and mode != 'debug':
configstyles(ui)
def _modesetup(ui):
if ui.plain('color'):
return None
config = ui.config('ui', 'color')
if config == 'debug':
return 'debug'
auto = (config == 'auto')
always = False
if not auto and stringutil.parsebool(config):
# We want the config to behave like a boolean, "on" is actually auto,
# but "always" value is treated as a special case to reduce confusion.
if ui.configsource('ui', 'color') == '--color' or config == 'always':
always = True
else:
auto = True
if not always and not auto:
return None
formatted = (always or (encoding.environ.get('TERM') != 'dumb'
and ui.formatted()))
mode = ui.config('color', 'mode')
# If pager is active, color.pagermode overrides color.mode.
if getattr(ui, 'pageractive', False):
mode = ui.config('color', 'pagermode', mode)
realmode = mode
if pycompat.iswindows:
from . import win32
term = encoding.environ.get('TERM')
# TERM won't be defined in a vanilla cmd.exe environment.
# UNIX-like environments on Windows such as Cygwin and MSYS will
# set TERM. They appear to make a best effort attempt at setting it
# to something appropriate. However, not all environments with TERM
# defined support ANSI.
ansienviron = term and 'xterm' in term
if mode == 'auto':
# Since "ansi" could result in terminal gibberish, we error on the
# side of selecting "win32". However, if w32effects is not defined,
# we almost certainly don't support "win32", so don't even try.
# w32ffects is not populated when stdout is redirected, so checking
# it first avoids win32 calls in a state known to error out.
if ansienviron or not w32effects or win32.enablevtmode():
realmode = 'ansi'
else:
realmode = 'win32'
# An empty w32effects is a clue that stdout is redirected, and thus
# cannot enable VT mode.
elif mode == 'ansi' and w32effects and not ansienviron:
win32.enablevtmode()
elif mode == 'auto':
realmode = 'ansi'
def modewarn():
# only warn if color.mode was explicitly set and we're in
# a formatted terminal
if mode == realmode and formatted:
ui.warn(_('warning: failed to set color mode to %s\n') % mode)
if realmode == 'win32':
ui._terminfoparams.clear()
if not w32effects:
modewarn()
return None
elif realmode == 'ansi':
ui._terminfoparams.clear()
elif realmode == 'terminfo':
_terminfosetup(ui, mode, formatted)
if not ui._terminfoparams:
## FIXME Shouldn't we return None in this case too?
modewarn()
realmode = 'ansi'
else:
return None
if always or (auto and formatted):
return realmode
return None
def configstyles(ui):
ui._styles.update(_defaultstyles)
for status, cfgeffects in ui.configitems('color'):
if '.' not in status or status.startswith(('color.', 'terminfo.')):
continue
cfgeffects = ui.configlist('color', status)
if cfgeffects:
good = []
for e in cfgeffects:
if valideffect(ui, e):
good.append(e)
else:
ui.warn(_("ignoring unknown color/effect %r "
"(configured in color.%s)\n")
% (e, status))
ui._styles[status] = ' '.join(good)
def _activeeffects(ui):
'''Return the effects map for the color mode set on the ui.'''
if ui._colormode == 'win32':
return w32effects
elif ui._colormode is not None:
return _effects
return {}
def valideffect(ui, effect):
'Determine if the effect is valid or not.'
return ((not ui._terminfoparams and effect in _activeeffects(ui))
or (effect in ui._terminfoparams
or effect[:-11] in ui._terminfoparams))
def _effect_str(ui, effect):
'''Helper function for render_effects().'''
bg = False
if effect.endswith('_background'):
bg = True
effect = effect[:-11]
try:
attr, val, termcode = ui._terminfoparams[effect]
except KeyError:
return ''
if attr:
if termcode:
return termcode
else:
return curses.tigetstr(pycompat.sysstr(val))
elif bg:
return curses.tparm(curses.tigetstr(r'setab'), val)
else:
return curses.tparm(curses.tigetstr(r'setaf'), val)
def _mergeeffects(text, start, stop):
"""Insert start sequence at every occurrence of stop sequence
>>> s = _mergeeffects(b'cyan', b'[C]', b'|')
>>> s = _mergeeffects(s + b'yellow', b'[Y]', b'|')
>>> s = _mergeeffects(b'ma' + s + b'genta', b'[M]', b'|')
>>> s = _mergeeffects(b'red' + s, b'[R]', b'|')
>>> s
'[R]red[M]ma[Y][C]cyan|[R][M][Y]yellow|[R][M]genta|'
"""
parts = []
for t in text.split(stop):
if not t:
continue
parts.extend([start, t, stop])
return ''.join(parts)
def _render_effects(ui, text, effects):
'Wrap text in commands to turn on each effect.'
if not text:
return text
if ui._terminfoparams:
start = ''.join(_effect_str(ui, effect)
for effect in ['none'] + effects.split())
stop = _effect_str(ui, 'none')
else:
activeeffects = _activeeffects(ui)
start = [pycompat.bytestr(activeeffects[e])
for e in ['none'] + effects.split()]
start = '\033[' + ';'.join(start) + 'm'
stop = '\033[' + pycompat.bytestr(activeeffects['none']) + 'm'
return _mergeeffects(text, start, stop)
_ansieffectre = re.compile(br'\x1b\[[0-9;]*m')
def stripeffects(text):
"""Strip ANSI control codes which could be inserted by colorlabel()"""
return _ansieffectre.sub('', text)
def colorlabel(ui, msg, label):
"""add color control code according to the mode"""
if ui._colormode == 'debug':
if label and msg:
if msg.endswith('\n'):
msg = "[%s|%s]\n" % (label, msg[:-1])
else:
msg = "[%s|%s]" % (label, msg)
elif ui._colormode is not None:
effects = []
for l in label.split():
s = ui._styles.get(l, '')
if s:
effects.append(s)
elif valideffect(ui, l):
effects.append(l)
effects = ' '.join(effects)
if effects:
msg = '\n'.join([_render_effects(ui, line, effects)
for line in msg.split('\n')])
return msg
w32effects = None
if pycompat.iswindows:
import ctypes
_kernel32 = ctypes.windll.kernel32
_WORD = ctypes.c_ushort
_INVALID_HANDLE_VALUE = -1
class _COORD(ctypes.Structure):
_fields_ = [('X', ctypes.c_short),
('Y', ctypes.c_short)]
class _SMALL_RECT(ctypes.Structure):
_fields_ = [('Left', ctypes.c_short),
('Top', ctypes.c_short),
('Right', ctypes.c_short),
('Bottom', ctypes.c_short)]
class _CONSOLE_SCREEN_BUFFER_INFO(ctypes.Structure):
_fields_ = [('dwSize', _COORD),
('dwCursorPosition', _COORD),
('wAttributes', _WORD),
('srWindow', _SMALL_RECT),
('dwMaximumWindowSize', _COORD)]
_STD_OUTPUT_HANDLE = 0xfffffff5 # (DWORD)-11
_STD_ERROR_HANDLE = 0xfffffff4 # (DWORD)-12
_FOREGROUND_BLUE = 0x0001
_FOREGROUND_GREEN = 0x0002
_FOREGROUND_RED = 0x0004
_FOREGROUND_INTENSITY = 0x0008
_BACKGROUND_BLUE = 0x0010
_BACKGROUND_GREEN = 0x0020
_BACKGROUND_RED = 0x0040
_BACKGROUND_INTENSITY = 0x0080
_COMMON_LVB_REVERSE_VIDEO = 0x4000
_COMMON_LVB_UNDERSCORE = 0x8000
# http://msdn.microsoft.com/en-us/library/ms682088%28VS.85%29.aspx
w32effects = {
'none': -1,
'black': 0,
'red': _FOREGROUND_RED,
'green': _FOREGROUND_GREEN,
'yellow': _FOREGROUND_RED | _FOREGROUND_GREEN,
'blue': _FOREGROUND_BLUE,
'magenta': _FOREGROUND_BLUE | _FOREGROUND_RED,
'cyan': _FOREGROUND_BLUE | _FOREGROUND_GREEN,
'white': _FOREGROUND_RED | _FOREGROUND_GREEN | _FOREGROUND_BLUE,
'bold': _FOREGROUND_INTENSITY,
'black_background': 0x100, # unused value > 0x0f
'red_background': _BACKGROUND_RED,
'green_background': _BACKGROUND_GREEN,
'yellow_background': _BACKGROUND_RED | _BACKGROUND_GREEN,
'blue_background': _BACKGROUND_BLUE,
'purple_background': _BACKGROUND_BLUE | _BACKGROUND_RED,
'cyan_background': _BACKGROUND_BLUE | _BACKGROUND_GREEN,
'white_background': (_BACKGROUND_RED | _BACKGROUND_GREEN |
_BACKGROUND_BLUE),
'bold_background': _BACKGROUND_INTENSITY,
'underline': _COMMON_LVB_UNDERSCORE, # double-byte charsets only
'inverse': _COMMON_LVB_REVERSE_VIDEO, # double-byte charsets only
}
passthrough = {_FOREGROUND_INTENSITY,
_BACKGROUND_INTENSITY,
_COMMON_LVB_UNDERSCORE,
_COMMON_LVB_REVERSE_VIDEO}
stdout = _kernel32.GetStdHandle(
_STD_OUTPUT_HANDLE) # don't close the handle returned
if stdout is None or stdout == _INVALID_HANDLE_VALUE:
w32effects = None
else:
csbi = _CONSOLE_SCREEN_BUFFER_INFO()
if not _kernel32.GetConsoleScreenBufferInfo(
stdout, ctypes.byref(csbi)):
# stdout may not support GetConsoleScreenBufferInfo()
# when called from subprocess or redirected
w32effects = None
else:
origattr = csbi.wAttributes
ansire = re.compile('\033\[([^m]*)m([^\033]*)(.*)',
re.MULTILINE | re.DOTALL)
def win32print(ui, writefunc, *msgs, **opts):
for text in msgs:
_win32print(ui, text, writefunc, **opts)
def _win32print(ui, text, writefunc, **opts):
label = opts.get(r'label', '')
attr = origattr
def mapcolor(val, attr):
if val == -1:
return origattr
elif val in passthrough:
return attr | val
elif val > 0x0f:
return (val & 0x70) | (attr & 0x8f)
else:
return (val & 0x07) | (attr & 0xf8)
# determine console attributes based on labels
for l in label.split():
style = ui._styles.get(l, '')
for effect in style.split():
try:
attr = mapcolor(w32effects[effect], attr)
except KeyError:
# w32effects could not have certain attributes so we skip
# them if not found
pass
# hack to ensure regexp finds data
if not text.startswith('\033['):
text = '\033[m' + text
# Look for ANSI-like codes embedded in text
m = re.match(ansire, text)
try:
while m:
for sattr in m.group(1).split(';'):
if sattr:
attr = mapcolor(int(sattr), attr)
ui.flush()
_kernel32.SetConsoleTextAttribute(stdout, attr)
writefunc(m.group(2), **opts)
m = re.match(ansire, m.group(3))
finally:
# Explicitly reset original attributes
ui.flush()
_kernel32.SetConsoleTextAttribute(stdout, origattr)