filemerge: add config knob to check capabilities of internal merge tools
For historical reason, Mercurial assumes capabilities of internal
merge tools as below while examining rules to decide merge tool,
regardless of actual capabilities of them.
=============== ====== ========
specified via binary symlinks
=============== ====== ========
--tool o o
HGMERGE o o
merge-patterns o (*) x (*)
ui.merge x (*) x (*)
=============== ====== ========
This causes:
- unintentional internal merge tool is chosen for binary files via
merge-patterns section of configuration file
- explicit configuration of internal merge tool for symlinks is
ignored unintentionally
But on the other hand, simple "check capability strictly" might break
backward compatibility (e.g. existing merge automations), because it
changes the result of merge tool selection.
Therefore, this patch adds config knob "merge.strict-capability-check"
to control whether capabilities of internal merge tools should be
checked strictly or not.
If this configuration is true, capabilities of internal merge tools
are checked strictly in (*) cases above.
# server.py - utility and factory of server
#
# Copyright 2005-2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import os
from .i18n import _
from . import (
chgserver,
cmdutil,
commandserver,
error,
hgweb,
pycompat,
util,
)
from .utils import (
procutil,
)
def runservice(opts, parentfn=None, initfn=None, runfn=None, logfile=None,
runargs=None, appendpid=False):
'''Run a command as a service.'''
postexecargs = {}
if opts['daemon_postexec']:
for inst in opts['daemon_postexec']:
if inst.startswith('unlink:'):
postexecargs['unlink'] = inst[7:]
elif inst.startswith('chdir:'):
postexecargs['chdir'] = inst[6:]
elif inst != 'none':
raise error.Abort(_('invalid value for --daemon-postexec: %s')
% inst)
# When daemonized on Windows, redirect stdout/stderr to the lockfile (which
# gets cleaned up after the child is up and running), so that the parent can
# read and print the error if this child dies early. See 594dd384803c. On
# other platforms, the child can write to the parent's stdio directly, until
# it is redirected prior to runfn().
if pycompat.iswindows and opts['daemon_postexec']:
if 'unlink' in postexecargs and os.path.exists(postexecargs['unlink']):
procutil.stdout.flush()
procutil.stderr.flush()
fd = os.open(postexecargs['unlink'],
os.O_WRONLY | os.O_APPEND | os.O_BINARY)
try:
os.dup2(fd, procutil.stdout.fileno())
os.dup2(fd, procutil.stderr.fileno())
finally:
os.close(fd)
def writepid(pid):
if opts['pid_file']:
if appendpid:
mode = 'ab'
else:
mode = 'wb'
fp = open(opts['pid_file'], mode)
fp.write('%d\n' % pid)
fp.close()
if opts['daemon'] and not opts['daemon_postexec']:
# Signal child process startup with file removal
lockfd, lockpath = pycompat.mkstemp(prefix='hg-service-')
os.close(lockfd)
try:
if not runargs:
runargs = procutil.hgcmd() + pycompat.sysargv[1:]
runargs.append('--daemon-postexec=unlink:%s' % lockpath)
# Don't pass --cwd to the child process, because we've already
# changed directory.
for i in pycompat.xrange(1, len(runargs)):
if runargs[i].startswith('--cwd='):
del runargs[i]
break
elif runargs[i].startswith('--cwd'):
del runargs[i:i + 2]
break
def condfn():
return not os.path.exists(lockpath)
pid = procutil.rundetached(runargs, condfn)
if pid < 0:
# If the daemonized process managed to write out an error msg,
# report it.
if pycompat.iswindows and os.path.exists(lockpath):
with open(lockpath, 'rb') as log:
for line in log:
procutil.stderr.write(line)
raise error.Abort(_('child process failed to start'))
writepid(pid)
finally:
util.tryunlink(lockpath)
if parentfn:
return parentfn(pid)
else:
return
if initfn:
initfn()
if not opts['daemon']:
writepid(procutil.getpid())
if opts['daemon_postexec']:
try:
os.setsid()
except AttributeError:
pass
if 'chdir' in postexecargs:
os.chdir(postexecargs['chdir'])
procutil.hidewindow()
procutil.stdout.flush()
procutil.stderr.flush()
nullfd = os.open(os.devnull, os.O_RDWR)
logfilefd = nullfd
if logfile:
logfilefd = os.open(logfile, os.O_RDWR | os.O_CREAT | os.O_APPEND,
0o666)
os.dup2(nullfd, procutil.stdin.fileno())
os.dup2(logfilefd, procutil.stdout.fileno())
os.dup2(logfilefd, procutil.stderr.fileno())
stdio = (procutil.stdin.fileno(), procutil.stdout.fileno(),
procutil.stderr.fileno())
if nullfd not in stdio:
os.close(nullfd)
if logfile and logfilefd not in stdio:
os.close(logfilefd)
# Only unlink after redirecting stdout/stderr, so Windows doesn't
# complain about a sharing violation.
if 'unlink' in postexecargs:
os.unlink(postexecargs['unlink'])
if runfn:
return runfn()
_cmdservicemap = {
'chgunix': chgserver.chgunixservice,
'pipe': commandserver.pipeservice,
'unix': commandserver.unixforkingservice,
}
def _createcmdservice(ui, repo, opts):
mode = opts['cmdserver']
try:
return _cmdservicemap[mode](ui, repo, opts)
except KeyError:
raise error.Abort(_('unknown mode %s') % mode)
def _createhgwebservice(ui, repo, opts):
# this way we can check if something was given in the command-line
if opts.get('port'):
opts['port'] = util.getport(opts.get('port'))
alluis = {ui}
if repo:
baseui = repo.baseui
alluis.update([repo.baseui, repo.ui])
else:
baseui = ui
webconf = opts.get('web_conf') or opts.get('webdir_conf')
if webconf:
if opts.get('subrepos'):
raise error.Abort(_('--web-conf cannot be used with --subrepos'))
# load server settings (e.g. web.port) to "copied" ui, which allows
# hgwebdir to reload webconf cleanly
servui = ui.copy()
servui.readconfig(webconf, sections=['web'])
alluis.add(servui)
elif opts.get('subrepos'):
servui = ui
# If repo is None, hgweb.createapp() already raises a proper abort
# message as long as webconf is None.
if repo:
webconf = dict()
cmdutil.addwebdirpath(repo, "", webconf)
else:
servui = ui
optlist = ("name templates style address port prefix ipv6"
" accesslog errorlog certificate encoding")
for o in optlist.split():
val = opts.get(o, '')
if val in (None, ''): # should check against default options instead
continue
for u in alluis:
u.setconfig("web", o, val, 'serve')
app = hgweb.createapp(baseui, repo, webconf)
return hgweb.httpservice(servui, app, opts)
def createservice(ui, repo, opts):
if opts["cmdserver"]:
return _createcmdservice(ui, repo, opts)
else:
return _createhgwebservice(ui, repo, opts)