view Makefile @ 35756:cfdccd560b66

streamclone: define first iteration of version 2 of stream format

(This patch is based on a first draft from Gregory Szorc, with deeper rework)

Version 1 of the stream clone format was invented many years ago and suffers
from a few deficiencies:

1) Filenames are stored in store-encoded (on filesystem) form rather than in
   their internal form. This makes future compatibility with new store
   filename encodings more difficult.
2) File entry "headers" consist of a newline of the file name followed by the
   string file size. Converting strings to integers is avoidable overhead. We
   can't store filenames with newlines (manifests have this limitation as
   well, so it isn't a major concern). But the big concern here is the
   necessity for readline(). Scanning for newlines means reading ahead and
   that means extra buffer allocations and slicing (in Python) and this makes
   performance suffer.
3) Filenames aren't compressed optimally. Filenames should be compressed well
   since there is a lot of repeated data. However, since they are scattered
   all over the stream (with revlog data in between), they typically fall
   outside the window size of the compressor and don't compress.
4) It can only exchange stored based content, being able to exchange caches
   too would be nice.
5) It is limited to a stream-based protocol and isn't suitable for an on-disk
   format for general repository reading because the offset of individual file
   entries requires scanning the entire file to find file records.

As part of enabling streaming clones to work in bundle2, #2 proved to have a
significant negative impact on performance. Since bundle2 provides the
opportunity to start fresh, Gregory Szorc figured he would take the
opportunity to invent a new streaming clone data format.

The new format devised in this series addresses #1, #2, and #4. It punts on #3
because it was complex without yielding a significant gain and on #5 because
devising a new store format that "packs" multiple revlogs into a single
"packed revlog" is massive scope bloat. However, this v2 format might be
suitable for streaming into a "packed revlog" with minimal processing. If it
works, great. If not, we can always invent stream format when it is needed.

This patch only introduces the bases of the format. We'll get it usable through
bundle2 first, then we'll extend the format in future patches to bring it to its
full potential (especially #4).

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

export PREFIX=/usr/local
PYTHON=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILES:=$(shell find mercurial hgext doc -name '*.py')
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)
OSXVERSIONFLAGS ?= $(shell echo $$OSXVERSIONFLAGS)

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILERFLAG) -i \
	  build_hgexe $(COMPILERFLAG) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)

wheel:
	FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)

doc:
	$(MAKE) -C doc

cleanbutpackages:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext hgext3rd i18n mercurial tests hgdemandimport \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	rm -f mercurial/__modulepolicy__.py
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean
	$(MAKE) -C contrib/chg distclean

clean: cleanbutpackages
	rm -rf packages

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

testpy-%:
	@echo Looking for Python $* in $(HGPYTHONS)
	[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
	cd $$(mktemp --directory --tmpdir) && \
        $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
	cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)

check-code:
	hg manifest | xargs python contrib/check-code.py

format-c:
	clang-format --style file -i \
	  `hg files 'set:(**.c or **.cc or **.h) and not "listfile:contrib/clang-format-blacklist"'`

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py mercurial/templatekw.py \
	  mercurial/templater.py \
	  mercurial/filemerge.py \
	  mercurial/hgweb/webcommands.py \
	  mercurial/util.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	echo $(PYFILES) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

osx:
	rm -rf build/mercurial
	/usr/bin/python2.7 setup.py install --optimize=1 \
	  --root=build/mercurial/ --prefix=/usr/local/ \
	  --install-lib=/Library/Python/2.7/site-packages/
	make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
        # Place a bogon .DS_Store file in the target dir so we can be
        # sure it doesn't get included in the final package.
	touch build/mercurial/.DS_Store
        # install zsh completions - this location appears to be
        # searched by default as of macOS Sierra.
	install -d build/mercurial/usr/local/share/zsh/site-functions/
	install -m 0644 contrib/zsh_completion build/mercurial/usr/local/share/zsh/site-functions/_hg
        # install bash completions - there doesn't appear to be a
        # place that's searched by default for bash, so we'll follow
        # the lead of Apple's git install and just put it in a
        # location of our own.
	install -d build/mercurial/usr/local/hg/contrib/
	install -m 0644 contrib/bash_completion build/mercurial/usr/local/hg/contrib/hg-completion.bash
	make -C contrib/chg \
	  HGPATH=/usr/local/bin/hg \
	  PYTHON=/usr/bin/python2.7 \
	  HGEXTDIR=/Library/Python/2.7/site-packages/hgext \
	  DESTDIR=../../build/mercurial \
	  PREFIX=/usr/local \
	  clean install
	mkdir -p $${OUTPUTDIR:-dist}
	HGVER=$$(python contrib/genosxversion.py $(OSXVERSIONFLAGS) build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py) && \
	OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
	pkgbuild --filter \\.DS_Store --root build/mercurial/ \
	  --identifier org.mercurial-scm.mercurial \
	  --version "$${HGVER}" \
	  build/mercurial.pkg && \
	productbuild --distribution contrib/macosx/distribution.xml \
	  --package-path build/ \
	  --version "$${HGVER}" \
	  --resources contrib/macosx/ \
	  "$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg

deb:
	contrib/builddeb

ppa:
	contrib/builddeb --source-only

contrib/docker/debian-%: contrib/docker/debian.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-debian-jessie: contrib/docker/debian-jessie
	mkdir -p packages/debian-jessie
	contrib/dockerdeb debian jessie

docker-debian-stretch: contrib/docker/debian-stretch
	mkdir -p packages/debian-stretch
	contrib/dockerdeb debian stretch

contrib/docker/ubuntu-%: contrib/docker/ubuntu.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-ubuntu-trusty: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty

docker-ubuntu-trusty-ppa: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty --source-only

docker-ubuntu-xenial: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial

docker-ubuntu-xenial-ppa: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial --source-only

docker-ubuntu-yakkety: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety

docker-ubuntu-yakkety-ppa: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety --source-only

docker-ubuntu-zesty: contrib/docker/ubuntu-zesty
	contrib/dockerdeb ubuntu zesty

docker-ubuntu-zesty-ppa: contrib/docker/ubuntu-zesty
	contrib/dockerdeb ubuntu zesty --source-only

fedora20:
	mkdir -p packages/fedora20
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora20
	cp rpmbuild/SRPMS/* packages/fedora20
	rm -rf rpmbuild

docker-fedora20:
	mkdir -p packages/fedora20
	contrib/dockerrpm fedora20

fedora21:
	mkdir -p packages/fedora21
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora21
	cp rpmbuild/SRPMS/* packages/fedora21
	rm -rf rpmbuild

docker-fedora21:
	mkdir -p packages/fedora21
	contrib/dockerrpm fedora21

centos5:
	mkdir -p packages/centos5
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos5
	cp rpmbuild/SRPMS/* packages/centos5

docker-centos5:
	mkdir -p packages/centos5
	contrib/dockerrpm centos5 --withpython

centos6:
	mkdir -p packages/centos6
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos6
	cp rpmbuild/SRPMS/* packages/centos6

docker-centos6:
	mkdir -p packages/centos6
	contrib/dockerrpm centos6 --withpython

centos7:
	mkdir -p packages/centos7
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos7
	cp rpmbuild/SRPMS/* packages/centos7

docker-centos7:
	mkdir -p packages/centos7
	contrib/dockerrpm centos7

linux-wheels: linux-wheels-x86_64 linux-wheels-i686

linux-wheels-x86_64:
	docker run -e "HGTEST_JOBS=$(shell nproc)" --rm -ti -v `pwd`:/src quay.io/pypa/manylinux1_x86_64 /src/contrib/build-linux-wheels.sh

linux-wheels-i686:
	docker run -e "HGTEST_JOBS=$(shell nproc)" --rm -ti -v `pwd`:/src quay.io/pypa/manylinux1_i686 linux32 /src/contrib/build-linux-wheels.sh

.PHONY: help all local build doc cleanbutpackages clean install install-bin \
	install-doc install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code format-c update-pot \
	osx deb ppa docker-debian-jessie docker-debian-stretch \
	docker-ubuntu-trusty docker-ubuntu-trusty-ppa \
	docker-ubuntu-xenial docker-ubuntu-xenial-ppa \
	docker-ubuntu-yakkety docker-ubuntu-yakkety-ppa \
	docker-ubuntu-zesty docker-ubuntu-zesty-ppa \
	fedora20 docker-fedora20 fedora21 docker-fedora21 \
	centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7 \
	linux-wheels