contrib/bash_completion
author C. Masloch <pushbx@ulukai.org>
Wed, 20 Apr 2022 19:24:39 +0200
changeset 49449 cfff73cab721
parent 44820 f71c8eea7161
permissions -rw-r--r--
rebase: add boolean config item rebase.store-source This allows to use rebase without recording a rebase_source extra field. This is useful for example to build a mirror converted from another SCM (such as svn) by converting only new revisions, and then incrementally add them to the destination by pulling from the newly converted (unrelated) repo and rebasing the new revisions onto the last old already stored changeset. Without this patch the rebased changesets would always receive some rebase_source that would depend on the particular history of the conversion process, instead of only depending on the original source revisions. This is used to implement a hg mirror repo of SvarDOS (a partially nonfree but completely redistributable DOS distribution) in the scripts at https://hg.pushbx.org/ecm/svardos.scr/ In particular, cre.sh creates an svn mirror, upd.sh recreates an entire hg repo from the svn mirror (which takes too long to do in a regular job), and akt.sh uses hg convert with the config item convert.svn.startrev to incrementally convert only the two most recent revisions already found in the mirror destination plus any possible new revisions. If any are found, the temporary repo's changesets are pulled into the destination (as changesets from an unrelated repository). Then the changesets corresponding to the new revisions are rebased onto the prior final changeset. (Finally, the two remaining duplicates of the prior head and its parent are stripped from the destination repository.) Without this patch, the particular rebase_source extra field would depend on the order and times at which akt.sh was used, instead of only depending on the source repository. In other words, whatever sequence of upd.sh and akt.sh is used at whatever times, it is desired that the final output repositories always match each other exactly.

# bash completion for the Mercurial distributed SCM -*- sh -*-

# Docs:
#
# If you source this file from your .bashrc, bash should be able to
# complete a command line that uses hg with all the available commands
# and options and sometimes even arguments.
#
# Mercurial allows you to define additional commands through extensions.
# Bash should be able to automatically figure out the name of these new
# commands and their options.  See below for how to define _hg_opt_foo
# and _hg_cmd_foo functions to fine-tune the completion for option and
# non-option arguments, respectively.
#
#
# Notes about completion for specific commands:
#
# - the completion function for the email command from the patchbomb
#   extension will try to call _hg_emails to get a list of e-mail
#   addresses.  It's up to the user to define this function.  For
#   example, put the addresses of the lists that you usually patchbomb
#   in ~/.patchbomb-to and the addresses that you usually use to send
#   the patchbombs in ~/.patchbomb-from and use something like this:
#
#      _hg_emails()
#      {
#          if [ -r ~/.patchbomb-$1 ]; then
#              cat ~/.patchbomb-$1
#          fi
#      }
#
#
# Writing completion functions for additional commands:
#
# If it exists, the function _hg_cmd_foo will be called without
# arguments to generate the completion candidates for the hg command
# "foo".  If the command receives some arguments that aren't options
# even though they start with a "-", you can define a function called
# _hg_opt_foo to generate the completion candidates.  If _hg_opt_foo
# doesn't return 0, regular completion for options is attempted.
#
# In addition to the regular completion variables provided by bash,
# the following variables are also set:
# - $hg - the hg program being used (e.g. /usr/bin/hg)
# - $cmd - the name of the hg command being completed
# - $cmd_index - the index of $cmd in $COMP_WORDS
# - $cur - the current argument being completed
# - $prev - the argument before $cur
# - $global_args - "|"-separated list of global options that accept
#                  an argument (e.g. '--cwd|-R|--repository')
# - $canonical - 1 if we canonicalized $cmd before calling the function
#                0 otherwise
#

shopt -s extglob

_hg_cmd()
{
    HGPLAIN=1 "$hg" "$@" 2>/dev/null
}

_hg_commands()
{
    local commands
    commands="$(HGPLAINEXCEPT=alias _hg_cmd debugcomplete "$cur")" || commands=""
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$commands' -- "$cur"))
}

_hg_paths()
{
    local paths="$(_hg_cmd paths -q)"
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$paths' -- "$cur"))
}

_hg_repos()
{
    local i
    for i in $(compgen -d -- "$cur"); do
        test ! -d "$i"/.hg || COMPREPLY=(${COMPREPLY[@]:-} "$i")
    done
}

_hg_debugpathcomplete()
{
    local files="$(_hg_cmd debugpathcomplete $1 "$cur")"
    local IFS=$'\n'
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
}

_hg_status()
{
    if [ -z "$HGCOMPLETE_NOSTATUS" ]; then
        local files="$(_hg_cmd status -n$1 "glob:$cur**")"
        local IFS=$'\n'
        COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
    fi
}

_hg_branches()
{
    local branches="$(_hg_cmd branches -q)"
    local IFS=$'\n'
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$branches' -- "$cur"))
}

_hg_bookmarks()
{
    local bookmarks="$(_hg_cmd bookmarks -q)"
    local IFS=$'\n'
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$bookmarks' -- "$cur"))
}

_hg_labels()
{
    local labels="$(_hg_cmd debugnamecomplete "$cur")"
    local IFS=$'\n'
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$labels' -- "$cur"))
}

# this is "kind of" ugly...
_hg_count_non_option()
{
    local i count=0
    local filters="$1"

    for ((i=1; $i<=$COMP_CWORD; i++)); do
        if [[ "${COMP_WORDS[i]}" != -* ]]; then
            if [[ ${COMP_WORDS[i-1]} == @($filters|$global_args) ]]; then
                continue
            fi
            count=$(($count + 1))
        fi
    done

    echo $(($count - 1))
}

_hg_fix_wordlist()
{
    local LASTCHAR=' '
    if [ ${#COMPREPLY[@]} = 1 ]; then
        [ -d "$COMPREPLY" ] && LASTCHAR=/
        COMPREPLY=$(printf %q%s "$COMPREPLY" "$LASTCHAR")
    else
        for ((i=0; i < ${#COMPREPLY[@]}; i++)); do
            [ -d "${COMPREPLY[$i]}" ] && COMPREPLY[$i]=${COMPREPLY[$i]}/
        done
    fi
}

_hg()
{
    local cur prev cmd cmd_index opts i aliashg
    # global options that receive an argument
    local global_args='--cwd|-R|--repository|--color|--config|--encoding|--encodingmode|--pager'
    local hg="$1"
    local canonical=0

    aliashg=$(alias $hg 2>/dev/null)
    if [[ -n "$aliashg" ]]; then
      aliashg=${aliashg#"alias $hg='"}
      aliashg=${aliashg%"'"}
      # `source`d aliases break completion, so ignore them
      if [[ "${aliashg:0:7}" != "source " ]]; then
        hg=$aliashg
      fi
    fi

    COMPREPLY=()
    cur="$2"
    prev="$3"

    # searching for the command
    # (first non-option argument that doesn't follow a global option that
    #  receives an argument)
    for ((i=1; $i<=$COMP_CWORD; i++)); do
        if [[ ${COMP_WORDS[i]} != -* ]]; then
            if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
                cmd="${COMP_WORDS[i]}"
                cmd_index=$i
                break
            fi
        fi
    done

    if [[ "$cur" == -* ]]; then
        if [ "$(type -t "_hg_opt_$cmd")" = function ] && "_hg_opt_$cmd"; then
            _hg_fix_wordlist
            return
        fi

        opts=$(HGPLAINEXCEPT=alias _hg_cmd debugcomplete --options "$cmd")

        COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$opts' -- "$cur"))
        _hg_fix_wordlist
        return
    fi

    # global options
    case "$prev" in
        -R|--repository)
            _hg_paths
            _hg_repos
            _hg_fix_wordlist
            return
        ;;
        --cwd)
            # Stick with default bash completion
            _hg_fix_wordlist
            return
        ;;
        --color)
            local choices='true false yes no always auto never debug'
            COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$choices' -- "$cur"))
            _hg_fix_wordlist
            return
        ;;
        --pager)
            local choices='true false yes no always auto never'
            COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$choices' -- "$cur"))
            _hg_fix_wordlist
            return
        ;;
    esac

    if [ -z "$cmd" ] || [ $COMP_CWORD -eq $i ]; then
        _hg_commands
        _hg_fix_wordlist
        return
    fi

    # try to generate completion candidates for whatever command the user typed
    local help
    if _hg_command_specific; then
        _hg_fix_wordlist
        return
    fi

    # canonicalize the command name and try again
    help=$(_hg_cmd help "$cmd")
    if [ $? -ne 0 ]; then
        # Probably either the command doesn't exist or it's ambiguous
        return
    fi
    cmd=${help#hg }
    cmd=${cmd%%[$' \n']*}
    canonical=1
    _hg_command_specific
    _hg_fix_wordlist
}

_hg_command_specific()
{
    if [ "$(type -t "_hg_cmd_$cmd")" = function ]; then
        "_hg_cmd_$cmd"
        return 0
    fi

    if [ "$cmd" != status ]; then
        case "$prev" in
            -r|--rev)
                if [[ $canonical = 1 || status != "$cmd"* ]]; then
                    _hg_labels
                    return 0
                fi
                return 1
            ;;
            -B|--bookmark)
                if [[ $canonical = 1 || status != "$cmd"* ]]; then
                    _hg_bookmarks
                    return 0
                fi
                return 1
            ;;
            -b|--branch)
                if [[ $canonical = 1 || status != "$cmd"* ]]; then
                    _hg_branches
                    return 0
                fi
                return 1
            ;;
        esac
    fi

    local aliascmd=$(_hg_cmd showconfig alias.$cmd | awk '{print $1}')
    [ -n "$aliascmd" ] && cmd=$aliascmd

    case "$cmd" in
        help)
            _hg_commands
        ;;
        export)
            if _hg_ext_mq_patchlist qapplied && [ "${COMPREPLY[*]}" ]; then
                return 0
            fi
            _hg_labels
        ;;
        manifest|update|up|checkout|co)
            _hg_labels
        ;;
        pull|push|outgoing|incoming)
            _hg_paths
            _hg_repos
        ;;
        paths)
            _hg_paths
        ;;
        add)
            _hg_status "u"
        ;;
        merge)
            _hg_labels
        ;;
        commit|ci|record|amend)
            _hg_status "mar"
        ;;
        remove|rm)
            _hg_debugpathcomplete -n
        ;;
        forget)
            _hg_debugpathcomplete -fa
        ;;
        diff)
            _hg_status "mar"
        ;;
        revert)
            _hg_status "mard"
        ;;
        clone)
            local count=$(_hg_count_non_option)
            if [ $count = 1 ]; then
                _hg_paths
            fi
            _hg_repos
        ;;
        debugindex|debugindexdot)
            COMPREPLY=(${COMPREPLY[@]:-} $(compgen -f -X "!*.i" -- "$cur"))
        ;;
        debugdata)
            COMPREPLY=(${COMPREPLY[@]:-} $(compgen -f -X "!*.d" -- "$cur"))
        ;;
        *)
            return 1
        ;;
    esac

    return 0
}

complete -o bashdefault -o default -o nospace -F _hg hg \
    || complete -o default -o nospace -F _hg hg


# Completion for commands provided by extensions

# bookmarks
_hg_cmd_bookmarks()
{
    _hg_bookmarks
    return
}

# mq
_hg_ext_mq_patchlist()
{
    local patches
    patches=$(_hg_cmd $1)
    if [ $? -eq 0 ] && [ "$patches" ]; then
        COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$patches' -- "$cur"))
        return 0
    fi
    return 1
}

_hg_ext_mq_queues()
{
    local root=$(_hg_cmd root)
    local n
    for n in $(cd "$root"/.hg && compgen -d -- "$cur"); do
        # I think we're usually not interested in the regular "patches" queue
        # so just filter it.
        if [ "$n" != patches ] && [ -e "$root/.hg/$n/series" ]; then
            COMPREPLY=(${COMPREPLY[@]:-} "$n")
        fi
    done
}

_hg_cmd_qpop()
{
    if [[ "$prev" = @(-n|--name) ]]; then
        _hg_ext_mq_queues
        return
    fi
    _hg_ext_mq_patchlist qapplied
}

_hg_cmd_qpush()
{
    if [[ "$prev" = @(-n|--name) ]]; then
        _hg_ext_mq_queues
        return
    fi
    _hg_ext_mq_patchlist qunapplied
}

_hg_cmd_qgoto()
{
    if [[ "$prev" = @(-n|--name) ]]; then
        _hg_ext_mq_queues
        return
    fi
    _hg_ext_mq_patchlist qseries
}

_hg_cmd_qdelete()
{
    local qcmd=qunapplied
    if [[ "$prev" = @(-r|--rev) ]]; then
        qcmd=qapplied
    fi
    _hg_ext_mq_patchlist $qcmd
}

_hg_cmd_qfinish()
{
    if [[ "$prev" = @(-a|--applied) ]]; then
        return
    fi
    _hg_ext_mq_patchlist qapplied
}

_hg_cmd_qsave()
{
    if [[ "$prev" = @(-n|--name) ]]; then
        _hg_ext_mq_queues
        return
    fi
}

_hg_cmd_rebase() {
   if [[ "$prev" = @(-s|--source|-d|--dest|-b|--base|-r|--rev) ]]; then
       _hg_labels
       return
   fi
}

_hg_cmd_strip()
{
    if [[ "$prev" = @(-B|--bookmark) ]]; then
        _hg_bookmarks
        return
    fi
    _hg_labels
}

_hg_cmd_qcommit()
{
    local root=$(_hg_cmd root)
    # this is run in a sub-shell, so we can't use _hg_status
    local files=$(cd "$root/.hg/patches" && _hg_cmd status -nmar)
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$files' -- "$cur"))
}

_hg_cmd_qfold()
{
    _hg_ext_mq_patchlist qunapplied
}

_hg_cmd_qrename()
{
    _hg_ext_mq_patchlist qseries
}

_hg_cmd_qheader()
{
    _hg_ext_mq_patchlist qseries
}

_hg_cmd_qclone()
{
    local count=$(_hg_count_non_option)
    if [ $count = 1 ]; then
        _hg_paths
    fi
    _hg_repos
}

_hg_ext_mq_guards()
{
    _hg_cmd qselect --series | sed -e 's/^.//'
}

_hg_cmd_qselect()
{
    local guards=$(_hg_ext_mq_guards)
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$guards' -- "$cur"))
}

_hg_cmd_qguard()
{
    local prefix=''

    if [[ "$cur" == +* ]]; then
        prefix=+
    elif [[ "$cur" == -* ]]; then
        prefix=-
    fi
    local ncur=${cur#[-+]}

    if ! [ "$prefix" ]; then
        _hg_ext_mq_patchlist qseries
        return
    fi

    local guards=$(_hg_ext_mq_guards)
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -P $prefix -W '$guards' -- "$ncur"))
}

_hg_opt_qguard()
{
    local i
    for ((i=cmd_index+1; i<=COMP_CWORD; i++)); do
        if [[ ${COMP_WORDS[i]} != -* ]]; then
            if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
                _hg_cmd_qguard
                return 0
            fi
        elif [ "${COMP_WORDS[i]}" = -- ]; then
            _hg_cmd_qguard
            return 0
        fi
    done
    return 1
}

_hg_cmd_qqueue()
{
    local q
    local queues
    local opts="--list --create --rename --delete --purge"

    queues=$( _hg_cmd qqueue --quiet )

    COMPREPLY=( $( compgen -W "${opts} ${queues}" "${cur}" ) )
}


# hbisect
_hg_cmd_bisect()
{
    local i subcmd

    # find the sub-command
    for ((i=cmd_index+1; i<=COMP_CWORD; i++)); do
        if [[ ${COMP_WORDS[i]} != -* ]]; then
            if [[ ${COMP_WORDS[i-1]} != @($global_args) ]]; then
                subcmd="${COMP_WORDS[i]}"
                break
            fi
        fi
    done

    if [ -z "$subcmd" ] || [ $COMP_CWORD -eq $i ] || [ "$subcmd" = help ]; then
        COMPREPLY=(${COMPREPLY[@]:-}
                   $(compgen -W 'bad good help init next reset' -- "$cur"))
        return
    fi

    case "$subcmd" in
        good|bad)
            _hg_labels
            ;;
    esac

    return
}


# patchbomb
_hg_cmd_email()
{
    case "$prev" in
        -c|--cc|-t|--to|-f|--from|--bcc)
            # we need an e-mail address. let the user provide a function
            # to get them
            if [ "$(type -t _hg_emails)" = function ]; then
                local arg=to
                if [[ "$prev" == @(-f|--from) ]]; then
                    arg=from
                fi
                local addresses=$(_hg_emails $arg)
                COMPREPLY=(${COMPREPLY[@]:-}
                           $(compgen -W '$addresses' -- "$cur"))
            fi
            return
            ;;
        -m|--mbox)
            # fallback to standard filename completion
            return
            ;;
        -s|--subject)
            # free form string
            return
            ;;
    esac

    _hg_labels
    return
}


# gpg
_hg_cmd_sign()
{
    _hg_labels
}


# transplant
_hg_cmd_transplant()
{
    case "$prev" in
        -s|--source)
            _hg_paths
            _hg_repos
            return
            ;;
        --filter)
            # standard filename completion
            return
            ;;
    esac

    # all other transplant options values and command parameters are revisions
    _hg_labels
    return
}

# shelve
_hg_shelves()
{
    local shelves="$(_hg_cmd shelve -ql)"
    local IFS=$'\n'
    COMPREPLY=(${COMPREPLY[@]:-} $(compgen -W '$shelves' -- "$cur"))
}

_hg_cmd_shelve()
{
    if [[ "$prev" = @(-d|--delete|-l|--list|-p|--patch|--stat) ]]; then
        _hg_shelves
    else
        _hg_status "mard"
    fi
}

_hg_cmd_unshelve()
{
    _hg_shelves
}