view tests/test-flagprocessor.t @ 35309:d13526333835

phases: drop the list with phase of each rev, always comput phase sets

Change the C implementation of phasecache.loadphaserevs to provide only
the sets for draft and secret phase as well as the number of revisions
seen.

Change the pure Python implementation of the same functino to compute
the sets instead of the list of phases for each revision.

Change phasecache.phase to check the phase sets and assume public if the
revision is in neither draft nor secret set. This is computationally
slightly more expensive.

Change phasecache.getrevset for public() based queries to compute the
set of non-matching revisions and return the result as filtered
fullreposet. A shortcut is taken when no draft or secret revision
exists.

Bump the module version for the changed interface contract.

Overall, this saves around 16 Bytes per revision whenever the phasecache
is used, for the test case in issue5691 it is around 3MB. getrevset()
for a large repository is around 13% slower here, that seems an
acceptable trade off. Performance impact for phase() should be similar.

Differential Revision: https://phab.mercurial-scm.org/D1606

# Create server
  $ hg init server
  $ cd server
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF
  $ cd ../

# Clone server and enable extensions
  $ hg clone -q server client
  $ cd client
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Commit file that will trigger the noop extension
  $ echo '[NOOP]' > noop
  $ hg commit -Aqm "noop"

# Commit file that will trigger the base64 extension
  $ echo '[BASE64]' > base64
  $ hg commit -Aqm 'base64'

# Commit file that will trigger the gzip extension
  $ echo '[GZIP]' > gzip
  $ hg commit -Aqm 'gzip'

# Commit file that will trigger noop and base64
  $ echo '[NOOP][BASE64]' > noop-base64
  $ hg commit -Aqm 'noop+base64'

# Commit file that will trigger noop and gzip
  $ echo '[NOOP][GZIP]' > noop-gzip
  $ hg commit -Aqm 'noop+gzip'

# Commit file that will trigger base64 and gzip
  $ echo '[BASE64][GZIP]' > base64-gzip
  $ hg commit -Aqm 'base64+gzip'

# Commit file that will trigger base64, gzip and noop
  $ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
  $ hg commit -Aqm 'base64+gzip+noop'

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# Push to the server
  $ hg push
  pushing to $TESTTMP/server (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files

# Initialize new client (not cloning) and setup extension
  $ cd ..
  $ hg init client2
  $ cd client2
  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default = $TESTTMP/server
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Pull from server and update to latest revision
  $ hg pull default
  pulling from $TESTTMP/server (glob)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files
  new changesets 07b1b9442c5b:6e48f4215d24
  (run 'hg update' to get a working copy)
  $ hg update
  7 files updated, 0 files merged, 0 files removed, 0 files unresolved

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# TEST: ensure a missing processor is handled
  $ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
  $ hg commit -Aqm 'fail+base64+gzip+noop'
  abort: missing processor for flag '0x1'!
  [255]
  $ rm fail-base64-gzip-noop

# TEST: ensure we cannot register several flag processors on the same flag
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > duplicate=$TESTDIR/flagprocessorext.py
  > EOF
  $ hg debugrebuilddirstate
  Traceback (most recent call last):
    File "*/mercurial/extensions.py", line *, in _runextsetup (glob)
      extsetup(ui)
    File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
      validatehash,
    File "*/mercurial/revlog.py", line *, in addflagprocessor (glob)
      raise error.Abort(msg)
  Abort: cannot register multiple processors on flag '0x8'.
  *** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
  $ hg st 2>&1 | egrep 'cannot register multiple processors|flagprocessorext'
    File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
  Abort: cannot register multiple processors on flag '0x8'.
  *** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
    File "*/tests/flagprocessorext.py", line *, in b64decode (glob)

  $ cd ..

# TEST: bundle repo
  $ hg init bundletest
  $ cd bundletest

  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > flagprocessor=$TESTDIR/flagprocessorext.py
  > EOF

  $ for i in 0 single two three 4; do
  >   echo '[BASE64]a-bit-longer-'$i > base64
  >   hg commit -m base64-$i -A base64
  > done

  $ hg update 2 -q
  $ echo '[BASE64]a-bit-longer-branching' > base64
  $ hg commit -q -m branching

  $ hg bundle --base 1 bundle.hg
  4 changesets found
  $ hg --config extensions.strip= strip -r 2 --no-backup --force -q
  $ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  

  $ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
  $ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  
  $ rm bundle.hg bundle-again.hg

# TEST: hg status

  $ hg status
  $ hg diff