view tests/test-releasenotes-formatting.t @ 35309:d13526333835

phases: drop the list with phase of each rev, always comput phase sets

Change the C implementation of phasecache.loadphaserevs to provide only
the sets for draft and secret phase as well as the number of revisions
seen.

Change the pure Python implementation of the same functino to compute
the sets instead of the list of phases for each revision.

Change phasecache.phase to check the phase sets and assume public if the
revision is in neither draft nor secret set. This is computationally
slightly more expensive.

Change phasecache.getrevset for public() based queries to compute the
set of non-matching revisions and return the result as filtered
fullreposet. A shortcut is taken when no draft or secret revision
exists.

Bump the module version for the changed interface contract.

Overall, this saves around 16 Bytes per revision whenever the phasecache
is used, for the test case in issue5691 it is around 3MB. getrevset()
for a large repository is around 13% slower here, that seems an
acceptable trade off. Performance impact for phase() should be similar.

Differential Revision: https://phab.mercurial-scm.org/D1606

#require fuzzywuzzy

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > releasenotes=
  > EOF

  $ hg init simple-repo
  $ cd simple-repo

A fix with a single line results in a bullet point in the appropriate section

  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > single line fix
  > 
  > .. fix::
  > 
  >    Simple fix with a single line content entry.
  > EOF

  $ hg releasenotes -r . $TESTTMP/relnotes-single-line

  $ cat $TESTTMP/relnotes-single-line
  Bug Fixes
  =========
  
  * Simple fix with a single line content entry.

A fix with multiple lines is handled correctly

  $ touch fix2
  $ hg -q commit -A -l - << EOF
  > multi line fix
  > 
  > .. fix::
  > 
  >    First line of fix entry.
  >    A line after it without a space.
  > 
  >    A new paragraph in the fix entry. And this is a really long line. It goes on for a while.
  >    And it wraps around to a new paragraph.
  > EOF

  $ hg releasenotes -r . $TESTTMP/relnotes-multi-line
  $ cat $TESTTMP/relnotes-multi-line
  Bug Fixes
  =========
  
  * First line of fix entry. A line after it without a space.
  
    A new paragraph in the fix entry. And this is a really long line. It goes on
    for a while. And it wraps around to a new paragraph.

A release note with a title results in a sub-section being written

  $ touch fix3
  $ hg -q commit -A -l - << EOF
  > fix with title
  > 
  > .. fix:: Fix Title
  > 
  >    First line of fix with title.
  > 
  >    Another paragraph of fix with title. But this is a paragraph
  >    with multiple lines.
  > EOF

  $ hg releasenotes -r . $TESTTMP/relnotes-fix-with-title
  $ cat $TESTTMP/relnotes-fix-with-title
  Bug Fixes
  =========
  
  Fix Title
  ---------
  
  First line of fix with title.
  
  Another paragraph of fix with title. But this is a paragraph with multiple
  lines.

  $ cd ..

Formatting of multiple bullet points works

  $ hg init multiple-bullets
  $ cd multiple-bullets
  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. fix::
  > 
  >    first fix
  > EOF

  $ touch fix2
  $ hg -q commit -A -l - << EOF
  > commit 2
  > 
  > .. fix::
  > 
  >    second fix
  > 
  >    Second paragraph of second fix.
  > EOF

  $ touch fix3
  $ hg -q commit -A -l - << EOF
  > commit 3
  > 
  > .. fix::
  > 
  >    third fix
  > EOF

  $ hg releasenotes -r 'all()' $TESTTMP/relnotes-multiple-bullets
  $ cat $TESTTMP/relnotes-multiple-bullets
  Bug Fixes
  =========
  
  * first fix
  
  * second fix
  
    Second paragraph of second fix.
  
  * third fix

  $ cd ..

Formatting of multiple sections works

  $ hg init multiple-sections
  $ cd multiple-sections
  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. fix::
  > 
  >    first fix
  > EOF

  $ touch feature1
  $ hg -q commit -A -l - << EOF
  > commit 2
  > 
  > .. feature::
  > 
  >    description of the new feature
  > EOF

  $ touch fix2
  $ hg -q commit -A -l - << EOF
  > commit 3
  > 
  > .. fix::
  > 
  >    second fix
  > EOF

  $ hg releasenotes -r 'all()' $TESTTMP/relnotes-multiple-sections
  $ cat $TESTTMP/relnotes-multiple-sections
  New Features
  ============
  
  * description of the new feature
  
  Bug Fixes
  =========
  
  * first fix
  
  * second fix

  $ cd ..

Section with subsections and bullets

  $ hg init multiple-subsections
  $ cd multiple-subsections

  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. fix:: Title of First Fix
  > 
  >    First paragraph of first fix.
  > 
  >    Second paragraph of first fix.
  > EOF

  $ touch fix2
  $ hg -q commit -A -l - << EOF
  > commit 2
  > 
  > .. fix:: Title of Second Fix
  > 
  >    First paragraph of second fix.
  > 
  >    Second paragraph of second fix.
  > EOF

  $ hg releasenotes -r 'all()' $TESTTMP/relnotes-multiple-subsections
  $ cat $TESTTMP/relnotes-multiple-subsections
  Bug Fixes
  =========
  
  Title of First Fix
  ------------------
  
  First paragraph of first fix.
  
  Second paragraph of first fix.
  
  Title of Second Fix
  -------------------
  
  First paragraph of second fix.
  
  Second paragraph of second fix.

Now add bullet points to sections having sub-sections

  $ touch fix3
  $ hg -q commit -A -l - << EOF
  > commit 3
  > 
  > .. fix::
  > 
  >    Short summary of fix 3
  > EOF

  $ hg releasenotes -r 'all()' $TESTTMP/relnotes-multiple-subsections-with-bullets
  $ cat $TESTTMP/relnotes-multiple-subsections-with-bullets
  Bug Fixes
  =========
  
  Title of First Fix
  ------------------
  
  First paragraph of first fix.
  
  Second paragraph of first fix.
  
  Title of Second Fix
  -------------------
  
  First paragraph of second fix.
  
  Second paragraph of second fix.
  
  Other Changes
  -------------
  
  * Short summary of fix 3

  $ cd ..

Multiple 'Other Changes' sub-sections for every section

  $ hg init multiple-otherchanges
  $ cd multiple-otherchanges

  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. fix:: Title of First Fix
  > 
  >    First paragraph of fix 1.
  > EOF

  $ touch feature1
  $ hg -q commit -A -l - << EOF
  > commit 2
  > 
  > .. feature:: Title of First Feature
  > 
  >    First paragraph of feature 1.
  > EOF

  $ touch feature2
  $ hg -q commit -A -l - << EOF
  > commit 3
  > 
  > .. feature::
  > 
  >    Short summary of feature 2.
  > EOF

  $ touch fix2
  $ hg -q commit -A -l - << EOF
  > commit 4
  > 
  > .. fix::
  > 
  >    Short summary of fix 2
  > EOF

  $ hg releasenotes -r 'all()' $TESTTMP/relnotes-multiple-otherchanges
  $ cat $TESTTMP/relnotes-multiple-otherchanges
  New Features
  ============
  
  Title of First Feature
  ----------------------
  
  First paragraph of feature 1.
  
  Other Changes
  -------------
  
  * Short summary of feature 2.
  
  Bug Fixes
  =========
  
  Title of First Fix
  ------------------
  
  First paragraph of fix 1.
  
  Other Changes
  -------------
  
  * Short summary of fix 2

  $ cd ..

Using custom sections in notes

  $ hg init custom-section
  $ cd custom-section
  $ cat >> .hgreleasenotes << EOF
  > [sections]
  > testsection=Name of Section
  > EOF

  $ touch a
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. testsection::
  > 
  >    First paragraph under this admonition.
  > EOF

  $ hg releasenotes -r . $TESTTMP/relnotes-custom-section
  $ cat $TESTTMP/relnotes-custom-section
  Name of Section
  ===============
  
  * First paragraph under this admonition.

Overriding default sections (For eg. by default feature = New Features)

  $ cat >> .hgreleasenotes << EOF
  > [sections]
  > feature=Feature Additions
  > EOF

  $ touch b
  $ hg -q commit -A -l - << EOF
  > commit 2
  > 
  > .. feature::
  > 
  >    Adds a new feature.
  > EOF

  $ hg releasenotes -r . $TESTTMP/relnotes-override-section
  $ cat $TESTTMP/relnotes-override-section
  Feature Additions
  =================
  
  * Adds a new feature.

  $ cd ..

Testing output for the --check (-c) flag

  $ hg init check-flag
  $ cd check-flag

  $ touch a
  $ hg -q commit -A -l - << EOF
  > .. asf::
  > 
  >    First paragraph under this admonition.
  > EOF

Suggest similar admonition in place of the invalid one.

  $ hg releasenotes -r . -c
  Invalid admonition 'asf' present in changeset 4026fe9e1c20

  $ touch b
  $ hg -q commit -A -l - << EOF
  > .. fixes::
  > 
  >    First paragraph under this admonition.
  > EOF

  $ hg releasenotes -r . -c
  Invalid admonition 'fixes' present in changeset 0e7130d2705c
  (did you mean fix?)

  $ cd ..

Usage of --list flag

  $ hg init relnotes-list
  $ cd relnotes-list
  $ hg releasenotes -l
  feature: New Features
  bc: Backwards Compatibility Changes
  fix: Bug Fixes
  perf: Performance Improvements
  api: API Changes

  $ cd ..

Raise error on simultaneous usage of flags

  $ hg init relnotes-raise-error
  $ cd relnotes-raise-error
  $ hg releasenotes -r . -l
  abort: cannot use both '--list' and '--rev'
  [255]

  $ hg releasenotes -l -c
  abort: cannot use both '--list' and '--check'
  [255]

Display release notes for specified revs if no file is mentioned

  $ hg init relnotes-nofile
  $ cd relnotes-nofile

  $ touch fix1
  $ hg -q commit -A -l - << EOF
  > commit 1
  > 
  > .. fix:: Title of First Fix
  > 
  >    First paragraph of fix 1.
  > EOF

  $ hg releasenote -r .
  Bug Fixes
  =========
  
  Title of First Fix
  ------------------
  
  First paragraph of fix 1.