view doc/check-seclevel.py @ 21424:d13b4ecdb680

test: split test-largefile.t in multiple file

The `test-largefiles.t` unified test is significantly longer (about 30%) than
any other tests in the mercurial test suite. As a result, its is alway the last
test my test runner is waiting for at the end of a run.

In practice, this means that `test-largefile.t` is wasting half a minute of my
life every times I'm running the mercurial test suites. This probably mean more
a few cumulated day by now.

I've finally decided to split it up in multiple smaller tests to bring it back in
reasonable length.

This changeset extracts independent test cases in two files. One dedicated to
wire protocole testing, and another one dedicated to all other tests that could
be independently extracted.

No test case were haltered in the making of this changeset.

Various timing available below. All timing have been done on a with 90 jobs on a
64 cores machine. Similar result are shown on firefly (20 jobs on 12 core).

General timing of the whole run
--------------------------------

We see a 25% real time improvement for no significant cpu time impact.

Before split:

    real   2m1.149s
    user  58m4.662s
    sys   11m28.563s

After split:

    real   1m31.977s
    user  57m45.993s
    sys   11m33.634s


Last test to finish (using run-test.py --time)
----------------------------------------------

test-largefile.t is now finishing at the same time than other slow tests.

Before split:

    Time      Test
    119.280   test-largefiles.t
     93.995   test-mq.t
     89.897   test-subrepo.t
     86.920   test-glog.t
     85.508   test-rename-merge2.t
     83.594   test-revset.t
     79.824   test-keyword.t
     78.077   test-mq-header-date.t

After split:

    Time      Test
    90.414   test-mq.t
    88.594   test-largefiles.t
    85.363   test-subrepo.t
    81.059   test-glog.t
    78.927   test-rename-merge2.t
    78.021   test-revset.t
    77.777   test-command-template.t



Timing of largefile test themself
-----------------------------------

Running only tests prefixed with "test-largefiles".
No significant change in cumulated time.

Before:

    Time     Test
    58.673   test-largefiles.t
     2.931   test-largefiles-cache.t
     0.583   test-largefiles-small-disk.t

After:

    Time     Test
    31.754   test-largefiles.t
    17.460   test-largefiles-misc.t
     8.888   test-largefiles-wireproto.t
     2.864   test-largefiles-cache.t
     0.580   test-largefiles-small-disk.t

#!/usr/bin/env python
#
# checkseclevel - checking section title levels in each online help documents

import sys, os
import optparse

# import from the live mercurial repo
sys.path.insert(0, "..")
# fall back to pure modules if required C extensions are not available
sys.path.append(os.path.join('..', 'mercurial', 'pure'))
from mercurial import demandimport; demandimport.enable()
from mercurial.commands import table
from mercurial.help import helptable
from mercurial import extensions
from mercurial import minirst
from mercurial import util

_verbose = False

def verbose(msg):
    if _verbose:
        print msg

def error(msg):
    sys.stderr.write('%s\n' % msg)

level2mark = ['"', '=', '-', '.', '#']
reservedmarks = ['"']

mark2level = {}
for m, l in zip(level2mark, xrange(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3

def showavailables(initlevel):
    error('    available marks and order of them in this help: %s' %
          (', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1:]])))

def checkseclevel(doc, name, initlevel):
    verbose('checking "%s"' % name)
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block['type'] != 'section':
            continue
        mark = block['underline']
        title = block['lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            error('invalid section mark %r for "%s" of %s' %
                  (mark * 4, title, name))
            showavailables(initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            error('gap of section level at "%s" of %s' %
                  (title, name))
            showavailables(initlevel)
            errorcnt += 1
            continue
        verbose('appropriate section level for "%s %s"' %
                (mark * (nextlevel * 2), title))
        curlevel = nextlevel

    return errorcnt

def checkcmdtable(cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split("|")[0].lstrip("^")
        if not entry[0].__doc__:
            verbose('skip checking %s: no help document' %
                    (namefmt % name))
            continue
        errorcnt += checkseclevel(entry[0].__doc__,
                                  namefmt % name,
                                  initlevel)
    return errorcnt

def checkhghelps():
    errorcnt = 0
    for names, sec, doc in helptable:
        if util.safehasattr(doc, '__call__'):
            doc = doc()
        errorcnt += checkseclevel(doc,
                                  '%s help topic' % names[0],
                                  initlevel_topic)

    errorcnt += checkcmdtable(table, '%s command', initlevel_cmd)

    for name in sorted(extensions.enabled().keys() +
                       extensions.disabled().keys()):
        mod = extensions.load(None, name, None)
        if not mod.__doc__:
            verbose('skip checking %s extension: no help document' % name)
            continue
        errorcnt += checkseclevel(mod.__doc__,
                                  '%s extension' % name,
                                  initlevel_ext)

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(cmdtable,
                                      '%s command of ' + name + ' extension',
                                      initlevel_ext_cmd)
    return errorcnt

def checkfile(filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        fp = open(filename)
        try:
            doc = fp.read()
        finally:
            fp.close()

    verbose('checking input from %s with initlevel %d' %
            (filename, initlevel))
    return checkseclevel(doc, 'input from %s' % filename, initlevel)

if __name__ == "__main__":
    optparser = optparse.OptionParser("""%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
""")
    optparser.add_option("-v", "--verbose",
                         help="enable additional output",
                         action="store_true")
    optparser.add_option("-f", "--file",
                         help="filename to read in (or '-' for stdin)",
                         action="store", default="")

    optparser.add_option("-t", "--topic",
                         help="parse file as help topic",
                         action="store_const", dest="initlevel", const=0)
    optparser.add_option("-c", "--command",
                         help="parse file as help of core command",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-e", "--extension",
                         help="parse file as help of extension",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-C", "--extension-command",
                         help="parse file as help of extension command",
                         action="store_const", dest="initlevel", const=3)

    optparser.add_option("-l", "--initlevel",
                         help="set initial section level manually",
                         action="store", type="int", default=0)

    (options, args) = optparser.parse_args()

    _verbose = options.verbose

    if options.file:
        if checkfile(options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps():
            sys.exit(1)