view mercurial/filemerge.py @ 21424:d13b4ecdb680

test: split test-largefile.t in multiple file

The `test-largefiles.t` unified test is significantly longer (about 30%) than
any other tests in the mercurial test suite. As a result, its is alway the last
test my test runner is waiting for at the end of a run.

In practice, this means that `test-largefile.t` is wasting half a minute of my
life every times I'm running the mercurial test suites. This probably mean more
a few cumulated day by now.

I've finally decided to split it up in multiple smaller tests to bring it back in
reasonable length.

This changeset extracts independent test cases in two files. One dedicated to
wire protocole testing, and another one dedicated to all other tests that could
be independently extracted.

No test case were haltered in the making of this changeset.

Various timing available below. All timing have been done on a with 90 jobs on a
64 cores machine. Similar result are shown on firefly (20 jobs on 12 core).

General timing of the whole run
--------------------------------

We see a 25% real time improvement for no significant cpu time impact.

Before split:

    real   2m1.149s
    user  58m4.662s
    sys   11m28.563s

After split:

    real   1m31.977s
    user  57m45.993s
    sys   11m33.634s


Last test to finish (using run-test.py --time)
----------------------------------------------

test-largefile.t is now finishing at the same time than other slow tests.

Before split:

    Time      Test
    119.280   test-largefiles.t
     93.995   test-mq.t
     89.897   test-subrepo.t
     86.920   test-glog.t
     85.508   test-rename-merge2.t
     83.594   test-revset.t
     79.824   test-keyword.t
     78.077   test-mq-header-date.t

After split:

    Time      Test
    90.414   test-mq.t
    88.594   test-largefiles.t
    85.363   test-subrepo.t
    81.059   test-glog.t
    78.927   test-rename-merge2.t
    78.021   test-revset.t
    77.777   test-command-template.t



Timing of largefile test themself
-----------------------------------

Running only tests prefixed with "test-largefiles".
No significant change in cumulated time.

Before:

    Time     Test
    58.673   test-largefiles.t
     2.931   test-largefiles-cache.t
     0.583   test-largefiles-small-disk.t

After:

    Time     Test
    31.754   test-largefiles.t
    17.460   test-largefiles-misc.t
     8.888   test-largefiles-wireproto.t
     2.864   test-largefiles-cache.t
     0.580   test-largefiles-small-disk.t

# filemerge.py - file-level merge handling for Mercurial
#
# Copyright 2006, 2007, 2008 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from node import short
from i18n import _
import util, simplemerge, match, error
import os, tempfile, re, filecmp

def _toolstr(ui, tool, part, default=""):
    return ui.config("merge-tools", tool + "." + part, default)

def _toolbool(ui, tool, part, default=False):
    return ui.configbool("merge-tools", tool + "." + part, default)

def _toollist(ui, tool, part, default=[]):
    return ui.configlist("merge-tools", tool + "." + part, default)

internals = {}

def internaltool(name, trymerge, onfailure=None):
    '''return a decorator for populating internal merge tool table'''
    def decorator(func):
        fullname = 'internal:' + name
        func.__doc__ = "``%s``\n" % fullname + func.__doc__.strip()
        internals[fullname] = func
        func.trymerge = trymerge
        func.onfailure = onfailure
        return func
    return decorator

def _findtool(ui, tool):
    if tool in internals:
        return tool
    for kn in ("regkey", "regkeyalt"):
        k = _toolstr(ui, tool, kn)
        if not k:
            continue
        p = util.lookupreg(k, _toolstr(ui, tool, "regname"))
        if p:
            p = util.findexe(p + _toolstr(ui, tool, "regappend"))
            if p:
                return p
    exe = _toolstr(ui, tool, "executable", tool)
    return util.findexe(util.expandpath(exe))

def _picktool(repo, ui, path, binary, symlink):
    def check(tool, pat, symlink, binary):
        tmsg = tool
        if pat:
            tmsg += " specified for " + pat
        if not _findtool(ui, tool):
            if pat: # explicitly requested tool deserves a warning
                ui.warn(_("couldn't find merge tool %s\n") % tmsg)
            else: # configured but non-existing tools are more silent
                ui.note(_("couldn't find merge tool %s\n") % tmsg)
        elif symlink and not _toolbool(ui, tool, "symlink"):
            ui.warn(_("tool %s can't handle symlinks\n") % tmsg)
        elif binary and not _toolbool(ui, tool, "binary"):
            ui.warn(_("tool %s can't handle binary\n") % tmsg)
        elif not util.gui() and _toolbool(ui, tool, "gui"):
            ui.warn(_("tool %s requires a GUI\n") % tmsg)
        else:
            return True
        return False

    # forcemerge comes from command line arguments, highest priority
    force = ui.config('ui', 'forcemerge')
    if force:
        toolpath = _findtool(ui, force)
        if toolpath:
            return (force, util.shellquote(toolpath))
        else:
            # mimic HGMERGE if given tool not found
            return (force, force)

    # HGMERGE takes next precedence
    hgmerge = os.environ.get("HGMERGE")
    if hgmerge:
        return (hgmerge, hgmerge)

    # then patterns
    for pat, tool in ui.configitems("merge-patterns"):
        mf = match.match(repo.root, '', [pat])
        if mf(path) and check(tool, pat, symlink, False):
            toolpath = _findtool(ui, tool)
            return (tool, util.shellquote(toolpath))

    # then merge tools
    tools = {}
    for k, v in ui.configitems("merge-tools"):
        t = k.split('.')[0]
        if t not in tools:
            tools[t] = int(_toolstr(ui, t, "priority", "0"))
    names = tools.keys()
    tools = sorted([(-p, t) for t, p in tools.items()])
    uimerge = ui.config("ui", "merge")
    if uimerge:
        if uimerge not in names:
            return (uimerge, uimerge)
        tools.insert(0, (None, uimerge)) # highest priority
    tools.append((None, "hgmerge")) # the old default, if found
    for p, t in tools:
        if check(t, None, symlink, binary):
            toolpath = _findtool(ui, t)
            return (t, util.shellquote(toolpath))

    # internal merge or prompt as last resort
    if symlink or binary:
        return "internal:prompt", None
    return "internal:merge", None

def _eoltype(data):
    "Guess the EOL type of a file"
    if '\0' in data: # binary
        return None
    if '\r\n' in data: # Windows
        return '\r\n'
    if '\r' in data: # Old Mac
        return '\r'
    if '\n' in data: # UNIX
        return '\n'
    return None # unknown

def _matcheol(file, origfile):
    "Convert EOL markers in a file to match origfile"
    tostyle = _eoltype(util.readfile(origfile))
    if tostyle:
        data = util.readfile(file)
        style = _eoltype(data)
        if style:
            newdata = data.replace(style, tostyle)
            if newdata != data:
                util.writefile(file, newdata)

@internaltool('prompt', False)
def _iprompt(repo, mynode, orig, fcd, fco, fca, toolconf):
    """Asks the user which of the local or the other version to keep as
    the merged version."""
    ui = repo.ui
    fd = fcd.path()

    if ui.promptchoice(_(" no tool found to merge %s\n"
                         "keep (l)ocal or take (o)ther?"
                         "$$ &Local $$ &Other") % fd, 0):
        return _iother(repo, mynode, orig, fcd, fco, fca, toolconf)
    else:
        return _ilocal(repo, mynode, orig, fcd, fco, fca, toolconf)

@internaltool('local', False)
def _ilocal(repo, mynode, orig, fcd, fco, fca, toolconf):
    """Uses the local version of files as the merged version."""
    return 0

@internaltool('other', False)
def _iother(repo, mynode, orig, fcd, fco, fca, toolconf):
    """Uses the other version of files as the merged version."""
    repo.wwrite(fcd.path(), fco.data(), fco.flags())
    return 0

@internaltool('fail', False)
def _ifail(repo, mynode, orig, fcd, fco, fca, toolconf):
    """
    Rather than attempting to merge files that were modified on both
    branches, it marks them as unresolved. The resolve command must be
    used to resolve these conflicts."""
    return 1

def _premerge(repo, toolconf, files, labels=None):
    tool, toolpath, binary, symlink = toolconf
    if symlink:
        return 1
    a, b, c, back = files

    ui = repo.ui

    # do we attempt to simplemerge first?
    try:
        premerge = _toolbool(ui, tool, "premerge", not binary)
    except error.ConfigError:
        premerge = _toolstr(ui, tool, "premerge").lower()
        valid = 'keep'.split()
        if premerge not in valid:
            _valid = ', '.join(["'" + v + "'" for v in valid])
            raise error.ConfigError(_("%s.premerge not valid "
                                      "('%s' is neither boolean nor %s)") %
                                    (tool, premerge, _valid))

    if premerge:
        r = simplemerge.simplemerge(ui, a, b, c, quiet=True, label=labels)
        if not r:
            ui.debug(" premerge successful\n")
            return 0
        if premerge != 'keep':
            util.copyfile(back, a) # restore from backup and try again
    return 1 # continue merging

@internaltool('merge', True,
              _("merging %s incomplete! "
                "(edit conflicts, then use 'hg resolve --mark')\n"))
def _imerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Uses the internal non-interactive simple merge algorithm for merging
    files. It will fail if there are any conflicts and leave markers in
    the partially merged file."""
    tool, toolpath, binary, symlink = toolconf
    if symlink:
        repo.ui.warn(_('warning: internal:merge cannot merge symlinks '
                       'for %s\n') % fcd.path())
        return False, 1
    r = _premerge(repo, toolconf, files, labels=labels)
    if r:
        a, b, c, back = files

        ui = repo.ui

        r = simplemerge.simplemerge(ui, a, b, c, label=labels)
        return True, r
    return False, 0

@internaltool('dump', True)
def _idump(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Creates three versions of the files to merge, containing the
    contents of local, other and base. These files can then be used to
    perform a merge manually. If the file to be merged is named
    ``a.txt``, these files will accordingly be named ``a.txt.local``,
    ``a.txt.other`` and ``a.txt.base`` and they will be placed in the
    same directory as ``a.txt``."""
    r = _premerge(repo, toolconf, files, labels=labels)
    if r:
        a, b, c, back = files

        fd = fcd.path()

        util.copyfile(a, a + ".local")
        repo.wwrite(fd + ".other", fco.data(), fco.flags())
        repo.wwrite(fd + ".base", fca.data(), fca.flags())
    return False, r

def _xmerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    r = _premerge(repo, toolconf, files, labels=labels)
    if r:
        tool, toolpath, binary, symlink = toolconf
        a, b, c, back = files
        out = ""
        env = {'HG_FILE': fcd.path(),
               'HG_MY_NODE': short(mynode),
               'HG_OTHER_NODE': str(fco.changectx()),
               'HG_BASE_NODE': str(fca.changectx()),
               'HG_MY_ISLINK': 'l' in fcd.flags(),
               'HG_OTHER_ISLINK': 'l' in fco.flags(),
               'HG_BASE_ISLINK': 'l' in fca.flags(),
               }

        ui = repo.ui

        args = _toolstr(ui, tool, "args", '$local $base $other')
        if "$output" in args:
            out, a = a, back # read input from backup, write to original
        replace = {'local': a, 'base': b, 'other': c, 'output': out}
        args = util.interpolate(r'\$', replace, args,
                                lambda s: util.shellquote(util.localpath(s)))
        r = util.system(toolpath + ' ' + args, cwd=repo.root, environ=env,
                        out=ui.fout)
        return True, r
    return False, 0

def filemerge(repo, mynode, orig, fcd, fco, fca):
    """perform a 3-way merge in the working directory

    mynode = parent node before merge
    orig = original local filename before merge
    fco = other file context
    fca = ancestor file context
    fcd = local file context for current/destination file
    """

    def temp(prefix, ctx):
        pre = "%s~%s." % (os.path.basename(ctx.path()), prefix)
        (fd, name) = tempfile.mkstemp(prefix=pre)
        data = repo.wwritedata(ctx.path(), ctx.data())
        f = os.fdopen(fd, "wb")
        f.write(data)
        f.close()
        return name

    if not fco.cmp(fcd): # files identical?
        return None

    ui = repo.ui
    fd = fcd.path()
    binary = fcd.isbinary() or fco.isbinary() or fca.isbinary()
    symlink = 'l' in fcd.flags() + fco.flags()
    tool, toolpath = _picktool(repo, ui, fd, binary, symlink)
    ui.debug("picked tool '%s' for %s (binary %s symlink %s)\n" %
               (tool, fd, binary, symlink))

    if tool in internals:
        func = internals[tool]
        trymerge = func.trymerge
        onfailure = func.onfailure
    else:
        func = _xmerge
        trymerge = True
        onfailure = _("merging %s failed!\n")

    toolconf = tool, toolpath, binary, symlink

    if not trymerge:
        return func(repo, mynode, orig, fcd, fco, fca, toolconf)

    a = repo.wjoin(fd)
    b = temp("base", fca)
    c = temp("other", fco)
    back = a + ".orig"
    util.copyfile(a, back)

    if orig != fco.path():
        ui.status(_("merging %s and %s to %s\n") % (orig, fco.path(), fd))
    else:
        ui.status(_("merging %s\n") % fd)

    ui.debug("my %s other %s ancestor %s\n" % (fcd, fco, fca))

    labels = ['local', 'other']
    needcheck, r = func(repo, mynode, orig, fcd, fco, fca, toolconf,
                        (a, b, c, back), labels=labels)
    if not needcheck:
        if r:
            if onfailure:
                ui.warn(onfailure % fd)
        else:
            util.unlink(back)

        util.unlink(b)
        util.unlink(c)
        return r

    if not r and (_toolbool(ui, tool, "checkconflicts") or
                  'conflicts' in _toollist(ui, tool, "check")):
        if re.search("^(<<<<<<< .*|=======|>>>>>>> .*)$", fcd.data(),
                     re.MULTILINE):
            r = 1

    checked = False
    if 'prompt' in _toollist(ui, tool, "check"):
        checked = True
        if ui.promptchoice(_("was merge of '%s' successful (yn)?"
                             "$$ &Yes $$ &No") % fd, 1):
            r = 1

    if not r and not checked and (_toolbool(ui, tool, "checkchanged") or
                                  'changed' in _toollist(ui, tool, "check")):
        if filecmp.cmp(a, back):
            if ui.promptchoice(_(" output file %s appears unchanged\n"
                                 "was merge successful (yn)?"
                                 "$$ &Yes $$ &No") % fd, 1):
                r = 1

    if _toolbool(ui, tool, "fixeol"):
        _matcheol(a, back)

    if r:
        if onfailure:
            ui.warn(onfailure % fd)
    else:
        util.unlink(back)

    util.unlink(b)
    util.unlink(c)
    return r

# tell hggettext to extract docstrings from these functions:
i18nfunctions = internals.values()