view tests/test-fastannotate-hg.t @ 39638:d292328e0143

exchangev2: fetch manifest revisions

Now that the server has support for retrieving manifest data, we can
implement the client bits to call it.

We teach the changeset fetching code to capture the manifest revisions
that are encountered on incoming changesets. We then feed this into a
new function which filters out known manifests and then batches up
manifest data requests to the server.

This is different from the previous wire protocol in a few notable
ways.

First, the client fetches manifest data separately and explicitly.
Before, we'd ask the server for data pertaining to some changesets
(via a "getbundle" command) and manifests (and files) would be sent
automatically. Providing an API for looking up just manifest data
separately gives clients much more flexibility for manifest management.
For example, a client may choose to only fetch manifest data on demand
instead of prefetching it (i.e. partial clone).

Second, we send N commands to the server for manifest retrieval instead
of 1. This property has a few nice side-effects. One is that the
deterministic nature of the requests lends itself to server-side
caching. For example, say the remote has 50,000 manifests. If the
server is configured to cache responses, each time a new commit
arrives, you will have a cache miss and need to regenerate all outgoing
data. But if you makes N requests requesting 10,000 manifests each,
a new commit will still yield cache hits on the initial, unchanged
manifest batches/requests.

A derived benefit from these properties is that resumable clone is
conceptually simpler to implement. When making a monolithic request
for all of the repository data, recovering from an interrupted clone
is hard because the server was in the driver's seat and was maintaining
state about all the data that needed transferred. With the client
driving fetching, the client can persist the set of unfetched entities
and retry/resume a fetch if something goes wrong. Or we can fetch all
data N changesets at a time and slowly build up a repository. This
approach is drastically easier to implement when we have server APIs
exposing low-level repository primitives (such as manifests and files).

We don't yet support tree manifests. But it should be possible to
implement that with the existing wire protocol command.

Differential Revision: https://phab.mercurial-scm.org/D4489

(this file is backported from core hg tests/test-annotate.t)

  $ cat >> $HGRCPATH << EOF
  > [diff]
  > git=1
  > [extensions]
  > fastannotate=
  > [fastannotate]
  > modes=fctx
  > forcefollow=False
  > mainbranch=.
  > EOF

  $ HGMERGE=true; export HGMERGE

init

  $ hg init repo
  $ cd repo

commit

  $ echo 'a' > a
  $ hg ci -A -m test -u nobody -d '1 0'
  adding a

annotate -c

  $ hg annotate -c a
  8435f90966e4: a

annotate -cl

  $ hg annotate -cl a
  8435f90966e4:1: a

annotate -d

  $ hg annotate -d a
  Thu Jan 01 00:00:01 1970 +0000: a

annotate -n

  $ hg annotate -n a
  0: a

annotate -nl

  $ hg annotate -nl a
  0:1: a

annotate -u

  $ hg annotate -u a
  nobody: a

annotate -cdnu

  $ hg annotate -cdnu a
  nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000: a

annotate -cdnul

  $ hg annotate -cdnul a
  nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000:1: a

annotate (JSON)

  $ hg annotate -Tjson a
  [
   {
    "lines": [{"line": "a\n", "rev": 0}],
    "path": "a"
   }
  ]

  $ hg annotate -Tjson -cdfnul a
  [
   {
    "lines": [{"date": [1.0, 0], "line": "a\n", "line_number": 1, "node": "8435f90966e442695d2ded29fdade2bac5ad8065", "path": "a", "rev": 0, "user": "nobody"}],
    "path": "a"
   }
  ]

  $ cat <<EOF >>a
  > a
  > a
  > EOF
  $ hg ci -ma1 -d '1 0'
  $ hg cp a b
  $ hg ci -mb -d '1 0'
  $ cat <<EOF >> b
  > b4
  > b5
  > b6
  > EOF
  $ hg ci -mb2 -d '2 0'

annotate -n b

  $ hg annotate -n b
  0: a
  1: a
  1: a
  3: b4
  3: b5
  3: b6

annotate --no-follow b

  $ hg annotate --no-follow b
  2: a
  2: a
  2: a
  3: b4
  3: b5
  3: b6

annotate -nl b

  $ hg annotate -nl b
  0:1: a
  1:2: a
  1:3: a
  3:4: b4
  3:5: b5
  3:6: b6

annotate -nf b

  $ hg annotate -nf b
  0 a: a
  1 a: a
  1 a: a
  3 b: b4
  3 b: b5
  3 b: b6

annotate -nlf b

  $ hg annotate -nlf b
  0 a:1: a
  1 a:2: a
  1 a:3: a
  3 b:4: b4
  3 b:5: b5
  3 b:6: b6

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat <<EOF >> b
  > b4
  > c
  > b5
  > EOF
  $ hg ci -mb2.1 -d '2 0'
  created new head
  $ hg merge
  merging b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mmergeb -d '3 0'

annotate after merge
(note: the first one falls back to the vanilla annotate which does not use linelog)

  $ hg annotate -nf b --debug
  fastannotate: b: rebuilding broken cache
  fastannotate: b: 5 new changesets in the main branch
  0 a: a
  1 a: a
  1 a: a
  3 b: b4
  4 b: c
  3 b: b5

(difference explained below)

  $ hg annotate -nf b --debug
  fastannotate: b: using fast path (resolved fctx: False)
  0 a: a
  1 a: a
  1 a: a
  4 b: b4
  4 b: c
  4 b: b5

annotate after merge with -l
(fastannotate differs from annotate)

  $ hg log -Gp -T '{rev}:{node}' -r '2..5'
  @    5:64afcdf8e29e063c635be123d8d2fb160af00f7e
  |\
  | o  4:5fbdc1152d97597717021ad9e063061b200f146bdiff --git a/b b/b
  | |  --- a/b
  | |  +++ b/b
  | |  @@ -1,3 +1,6 @@
  | |   a
  | |   a
  | |   a
  | |  +b4
  | |  +c
  | |  +b5
  | |
  o |  3:37ec9f5c3d1f99572d7075971cb4876e2139b52fdiff --git a/b b/b
  |/   --- a/b
  |    +++ b/b
  |    @@ -1,3 +1,6 @@
  |     a
  |     a
  |     a
  |    +b4
  |    +b5
  |    +b6
  |
  o  2:3086dbafde1ce745abfc8d2d367847280aabae9ddiff --git a/a b/b
  |  copy from a
  ~  copy to b
  

(in this case, "b4", "b5" could be considered introduced by either rev 3, or rev 4.
 and that causes the rev number difference)

  $ hg annotate -nlf b --config fastannotate.modes=
  0 a:1: a
  1 a:2: a
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5

  $ hg annotate -nlf b
  0 a:1: a
  1 a:2: a
  1 a:3: a
  4 b:4: b4
  4 b:5: c
  4 b:6: b5

  $ hg up -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cp a b
  $ cat <<EOF > b
  > a
  > z
  > a
  > EOF
  $ hg ci -mc -d '3 0'
  created new head
  $ hg merge
  merging b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat <<EOF >> b
  > b4
  > c
  > b5
  > EOF
  $ echo d >> b
  $ hg ci -mmerge2 -d '4 0'

annotate after rename merge

  $ hg annotate -nf b
  0 a: a
  6 b: z
  1 a: a
  3 b: b4
  4 b: c
  3 b: b5
  7 b: d

annotate after rename merge with -l
(fastannotate differs from annotate)

  $ hg log -Gp -T '{rev}:{node}' -r '0+1+6+7'
  @    7:6284bb6c38fef984a929862a53bbc71ce9eafa81diff --git a/b b/b
  |\   --- a/b
  | :  +++ b/b
  | :  @@ -1,3 +1,7 @@
  | :   a
  | :   z
  | :   a
  | :  +b4
  | :  +c
  | :  +b5
  | :  +d
  | :
  o :  6:b80e3e32f75a6a67cd4ac85496a11511e9112816diff --git a/a b/b
  :/   copy from a
  :    copy to b
  :    --- a/a
  :    +++ b/b
  :    @@ -1,3 +1,3 @@
  :    -a (?)
  :     a
  :    +z
  :     a
  :    -a (?)
  :
  o  1:762f04898e6684ff713415f7b8a8d53d33f96c92diff --git a/a b/a
  |  --- a/a
  |  +++ b/a
  |  @@ -1,1 +1,3 @@
  |   a
  |  +a
  |  +a
  |
  o  0:8435f90966e442695d2ded29fdade2bac5ad8065diff --git a/a b/a
     new file mode 100644
     --- /dev/null
     +++ b/a
     @@ -0,0 +1,1 @@
     +a
  

(note on question marks:
 the upstream bdiff change (96f2f50d923f+3633403888ae+8c0c75aa3ff4+5c4e2636c1a9
 +38ed54888617) alters the output so deletion is not always at the end of the
 output. for example:
 | a | b | old | new | # old: e1d6aa0e4c3a, new: 8836f13e3c5b
 |-------------------|
 | a | a |  a  | -a  |
 | a | z | +z  |  a  |
 | a | a |  a  | +z  |
 |   |   | -a  |  a  |
 |-------------------|
 | a | a |     a     |
 | a | a |     a     |
 | a |   |    -a     |
 this leads to more question marks below)

(rev 1 adds two "a"s and rev 6 deletes one "a".
 the "a" that rev 6 deletes could be either the first or the second "a" of those two "a"s added by rev 1.
 and that causes the line number difference)

  $ hg annotate -nlf b --config fastannotate.modes=
  0 a:1: a
  6 b:2: z
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  7 b:7: d

  $ hg annotate -nlf b
  0 a:1: a (?)
  1 a:2: a (?)
  6 b:2: z
  1 a:2: a (?)
  1 a:3: a (?)
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  7 b:7: d

Issue2807: alignment of line numbers with -l
(fastannotate differs from annotate, same reason as above)

  $ echo more >> b
  $ hg ci -mmore -d '5 0'
  $ echo more >> b
  $ hg ci -mmore -d '6 0'
  $ echo more >> b
  $ hg ci -mmore -d '7 0'
  $ hg annotate -nlf b
   0 a: 1: a (?)
   1 a: 2: a (?)
   6 b: 2: z
   1 a: 2: a (?)
   1 a: 3: a (?)
   3 b: 4: b4
   4 b: 5: c
   3 b: 5: b5
   7 b: 7: d
   8 b: 8: more
   9 b: 9: more
  10 b:10: more

linkrev vs rev

  $ hg annotate -r tip -n a
  0: a
  1: a
  1: a

linkrev vs rev with -l

  $ hg annotate -r tip -nl a
  0:1: a
  1:2: a
  1:3: a

Issue589: "undelete" sequence leads to crash

annotate was crashing when trying to --follow something

like A -> B -> A

generate ABA rename configuration

  $ echo foo > foo
  $ hg add foo
  $ hg ci -m addfoo
  $ hg rename foo bar
  $ hg ci -m renamefoo
  $ hg rename bar foo
  $ hg ci -m renamebar

annotate after ABA with follow

  $ hg annotate --follow foo
  foo: foo

missing file

  $ hg ann nosuchfile
  abort: nosuchfile: no such file in rev e9e6b4fa872f
  [255]

annotate file without '\n' on last line

  $ printf "" > c
  $ hg ci -A -m test -u nobody -d '1 0'
  adding c
  $ hg annotate c
  $ printf "a\nb" > c
  $ hg ci -m test
  $ hg annotate c
  [0-9]+: a (re)
  [0-9]+: b (re)

Issue3841: check annotation of the file of which filelog includes
merging between the revision and its ancestor

to reproduce the situation with recent Mercurial, this script uses (1)
"hg debugsetparents" to merge without ancestor check by "hg merge",
and (2) the extension to allow filelog merging between the revision
and its ancestor by overriding "repo._filecommit".

  $ cat > ../legacyrepo.py <<EOF
  > from mercurial import error, node
  > def reposetup(ui, repo):
  >     class legacyrepo(repo.__class__):
  >         def _filecommit(self, fctx, manifest1, manifest2,
  >                         linkrev, tr, changelist):
  >             fname = fctx.path()
  >             text = fctx.data()
  >             flog = self.file(fname)
  >             fparent1 = manifest1.get(fname, node.nullid)
  >             fparent2 = manifest2.get(fname, node.nullid)
  >             meta = {}
  >             copy = fctx.renamed()
  >             if copy and copy[0] != fname:
  >                 raise error.Abort('copying is not supported')
  >             if fparent2 != node.nullid:
  >                 changelist.append(fname)
  >                 return flog.add(text, meta, tr, linkrev,
  >                                 fparent1, fparent2)
  >             raise error.Abort('only merging is supported')
  >     repo.__class__ = legacyrepo
  > EOF

  $ cat > baz <<EOF
  > 1
  > 2
  > 3
  > 4
  > 5
  > EOF
  $ hg add baz
  $ hg commit -m "baz:0"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2
  > 3
  > 4
  > 5
  > EOF
  $ hg commit -m "baz:1"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3
  > 4
  > 5
  > EOF
  $ hg debugsetparents 17 17
  $ hg --config extensions.legacyrepo=../legacyrepo.py  commit -m "baz:2"
  $ hg debugindexdot baz
  digraph G {
  	-1 -> 0
  	0 -> 1
  	1 -> 2
  	1 -> 2
  }
  $ hg annotate baz
  17: 1 baz:1
  18: 2 baz:2
  16: 3
  16: 4
  16: 5

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3 baz:3
  > 4
  > 5
  > EOF
  $ hg commit -m "baz:3"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3 baz:3
  > 4 baz:4
  > 5
  > EOF
  $ hg debugsetparents 19 18
  $ hg --config extensions.legacyrepo=../legacyrepo.py  commit -m "baz:4"
  $ hg debugindexdot baz
  digraph G {
  	-1 -> 0
  	0 -> 1
  	1 -> 2
  	1 -> 2
  	2 -> 3
  	3 -> 4
  	2 -> 4
  }
  $ hg annotate baz
  17: 1 baz:1
  18: 2 baz:2
  19: 3 baz:3
  20: 4 baz:4
  16: 5

annotate clean file

  $ hg annotate -ncr "wdir()" foo
  11 472b18db256d : foo

annotate modified file

  $ echo foofoo >> foo
  $ hg annotate -r "wdir()" foo
  11 : foo
  20+: foofoo

  $ hg annotate -cr "wdir()" foo
  472b18db256d : foo
  b6bedd5477e7+: foofoo

  $ hg annotate -ncr "wdir()" foo
  11 472b18db256d : foo
  20 b6bedd5477e7+: foofoo

  $ hg annotate --debug -ncr "wdir()" foo
  11 472b18db256d1e8282064eab4bfdaf48cbfe83cd : foo
  20 b6bedd5477e797f25e568a6402d4697f3f895a72+: foofoo

  $ hg annotate -udr "wdir()" foo
  test Thu Jan 01 00:00:00 1970 +0000: foo
  test [A-Za-z0-9:+ ]+: foofoo (re)

  $ hg annotate -ncr "wdir()" -Tjson foo
  [
   {
    "lines": [{"line": "foo\n", "node": "472b18db256d1e8282064eab4bfdaf48cbfe83cd", "rev": 11}, {"line": "foofoo\n", "node": null, "rev": null}],
    "path": "foo"
   }
  ]

annotate added file

  $ echo bar > bar
  $ hg add bar
  $ hg annotate -ncr "wdir()" bar
  20 b6bedd5477e7+: bar

annotate renamed file

  $ hg rename foo renamefoo2
  $ hg annotate -ncr "wdir()" renamefoo2
  11 472b18db256d : foo
  20 b6bedd5477e7+: foofoo

annotate missing file

  $ rm baz
  $ hg annotate -ncr "wdir()" baz
  abort: $TESTTMP/repo/baz: $ENOENT$ (windows !)
  abort: $ENOENT$: $TESTTMP/repo/baz (no-windows !)
  [255]

annotate removed file

  $ hg rm baz
  $ hg annotate -ncr "wdir()" baz
  abort: $TESTTMP/repo/baz: $ENOENT$ (windows !)
  abort: $ENOENT$: $TESTTMP/repo/baz (no-windows !)
  [255]

Test annotate with whitespace options

  $ cd ..
  $ hg init repo-ws
  $ cd repo-ws
  $ cat > a <<EOF
  > aa
  > 
  > b b
  > EOF
  $ hg ci -Am "adda"
  adding a
  $ sed 's/EOL$//g' > a <<EOF
  > a  a
  > 
  >  EOL
  > b  b
  > EOF
  $ hg ci -m "changea"

Annotate with no option

  $ hg annotate a
  1: a  a
  0: 
  1:  
  1: b  b

Annotate with --ignore-space-change

  $ hg annotate --ignore-space-change a
  1: a  a
  1: 
  0:  
  0: b  b

Annotate with --ignore-all-space

  $ hg annotate --ignore-all-space a
  0: a  a
  0: 
  1:  
  0: b  b

Annotate with --ignore-blank-lines (similar to no options case)

  $ hg annotate --ignore-blank-lines a
  1: a  a
  0: 
  1:  
  1: b  b

  $ cd ..

Annotate with linkrev pointing to another branch
------------------------------------------------

create history with a filerev whose linkrev points to another branch

  $ hg init branchedlinkrev
  $ cd branchedlinkrev
  $ echo A > a
  $ hg commit -Am 'contentA'
  adding a
  $ echo B >> a
  $ hg commit -m 'contentB'
  $ hg up --rev 'desc(contentA)'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo unrelated > unrelated
  $ hg commit -Am 'unrelated'
  adding unrelated
  created new head
  $ hg graft -r 'desc(contentB)'
  grafting 1:fd27c222e3e6 "contentB"
  $ echo C >> a
  $ hg commit -m 'contentC'
  $ echo W >> a
  $ hg log -G
  @  changeset:   4:072f1e8df249
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     contentC
  |
  o  changeset:   3:ff38df03cc4b
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     contentB
  |
  o  changeset:   2:62aaf3f6fc06
  |  parent:      0:f0932f74827e
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     unrelated
  |
  | o  changeset:   1:fd27c222e3e6
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     contentB
  |
  o  changeset:   0:f0932f74827e
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     contentA
  

Annotate should list ancestor of starting revision only

  $ hg annotate a
  0: A
  3: B
  4: C

  $ hg annotate a -r 'wdir()'
  0 : A
  3 : B
  4 : C
  4+: W

Even when the starting revision is the linkrev-shadowed one:

  $ hg annotate a -r 3
  0: A
  3: B

  $ cd ..

Issue5360: Deleted chunk in p1 of a merge changeset

  $ hg init repo-5360
  $ cd repo-5360
  $ echo 1 > a
  $ hg commit -A a -m 1
  $ echo 2 >> a
  $ hg commit -m 2
  $ echo a > a
  $ hg commit -m a
  $ hg update '.^' -q
  $ echo 3 >> a
  $ hg commit -m 3 -q
  $ hg merge 2 -q
  $ cat > a << EOF
  > b
  > 1
  > 2
  > 3
  > a
  > EOF
  $ hg resolve --mark -q
  $ hg commit -m m
  $ hg annotate a
  4: b
  0: 1
  1: 2
  3: 3
  2: a

  $ cd ..