Mercurial > hg
view mercurial/archival.py @ 42897:d7304434390f
changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Sun, 08 Sep 2019 09:42:53 +0200 |
parents | 3d9d5e612e67 |
children | c04e0836f039 |
line wrap: on
line source
# archival.py - revision archival for mercurial # # Copyright 2006 Vadim Gelfer <vadim.gelfer@gmail.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import gzip import os import struct import tarfile import time import zipfile import zlib from .i18n import _ from .node import ( nullrev, ) from . import ( error, formatter, match as matchmod, pycompat, scmutil, util, vfs as vfsmod, ) stringio = util.stringio # from unzip source code: _UNX_IFREG = 0x8000 _UNX_IFLNK = 0xa000 def tidyprefix(dest, kind, prefix): '''choose prefix to use for names in archive. make sure prefix is safe for consumers.''' if prefix: prefix = util.normpath(prefix) else: if not isinstance(dest, bytes): raise ValueError('dest must be string if no prefix') prefix = os.path.basename(dest) lower = prefix.lower() for sfx in exts.get(kind, []): if lower.endswith(sfx): prefix = prefix[:-len(sfx)] break lpfx = os.path.normpath(util.localpath(prefix)) prefix = util.pconvert(lpfx) if not prefix.endswith('/'): prefix += '/' # Drop the leading '.' path component if present, so Windows can read the # zip files (issue4634) if prefix.startswith('./'): prefix = prefix[2:] if prefix.startswith('../') or os.path.isabs(lpfx) or '/../' in prefix: raise error.Abort(_('archive prefix contains illegal components')) return prefix exts = { 'tar': ['.tar'], 'tbz2': ['.tbz2', '.tar.bz2'], 'tgz': ['.tgz', '.tar.gz'], 'zip': ['.zip'], } def guesskind(dest): for kind, extensions in exts.iteritems(): if any(dest.endswith(ext) for ext in extensions): return kind return None def _rootctx(repo): # repo[0] may be hidden for rev in repo: return repo[rev] return repo[nullrev] # {tags} on ctx includes local tags and 'tip', with no current way to limit # that to global tags. Therefore, use {latesttag} as a substitute when # the distance is 0, since that will be the list of global tags on ctx. _defaultmetatemplate = br''' repo: {root} node: {ifcontains(rev, revset("wdir()"), "{p1node}{dirty}", "{node}")} branch: {branch|utf8} {ifeq(latesttagdistance, 0, join(latesttag % "tag: {tag}", "\n"), separate("\n", join(latesttag % "latesttag: {tag}", "\n"), "latesttagdistance: {latesttagdistance}", "changessincelatesttag: {changessincelatesttag}"))} '''[1:] # drop leading '\n' def buildmetadata(ctx): '''build content of .hg_archival.txt''' repo = ctx.repo() opts = { 'template': repo.ui.config('experimental', 'archivemetatemplate', _defaultmetatemplate) } out = util.stringio() fm = formatter.formatter(repo.ui, out, 'archive', opts) fm.startitem() fm.context(ctx=ctx) fm.data(root=_rootctx(repo).hex()) if ctx.rev() is None: dirty = '' if ctx.dirty(missing=True): dirty = '+' fm.data(dirty=dirty) fm.end() return out.getvalue() class tarit(object): '''write archive to tar file or stream. can write uncompressed, or compress with gzip or bzip2.''' class GzipFileWithTime(gzip.GzipFile): def __init__(self, *args, **kw): timestamp = None if r'timestamp' in kw: timestamp = kw.pop(r'timestamp') if timestamp is None: self.timestamp = time.time() else: self.timestamp = timestamp gzip.GzipFile.__init__(self, *args, **kw) def _write_gzip_header(self): self.fileobj.write('\037\213') # magic header self.fileobj.write('\010') # compression method fname = self.name if fname and fname.endswith('.gz'): fname = fname[:-3] flags = 0 if fname: flags = gzip.FNAME self.fileobj.write(pycompat.bytechr(flags)) gzip.write32u(self.fileobj, int(self.timestamp)) self.fileobj.write('\002') self.fileobj.write('\377') if fname: self.fileobj.write(fname + '\000') def __init__(self, dest, mtime, kind=''): self.mtime = mtime self.fileobj = None def taropen(mode, name='', fileobj=None): if kind == 'gz': mode = mode[0:1] if not fileobj: fileobj = open(name, mode + 'b') gzfileobj = self.GzipFileWithTime(name, pycompat.sysstr(mode + 'b'), zlib.Z_BEST_COMPRESSION, fileobj, timestamp=mtime) self.fileobj = gzfileobj return tarfile.TarFile.taropen( name, pycompat.sysstr(mode), gzfileobj) else: return tarfile.open( name, pycompat.sysstr(mode + kind), fileobj) if isinstance(dest, bytes): self.z = taropen('w:', name=dest) else: self.z = taropen('w|', fileobj=dest) def addfile(self, name, mode, islink, data): name = pycompat.fsdecode(name) i = tarfile.TarInfo(name) i.mtime = self.mtime i.size = len(data) if islink: i.type = tarfile.SYMTYPE i.mode = 0o777 i.linkname = pycompat.fsdecode(data) data = None i.size = 0 else: i.mode = mode data = stringio(data) self.z.addfile(i, data) def done(self): self.z.close() if self.fileobj: self.fileobj.close() class zipit(object): '''write archive to zip file or stream. can write uncompressed, or compressed with deflate.''' def __init__(self, dest, mtime, compress=True): if isinstance(dest, bytes): dest = pycompat.fsdecode(dest) self.z = zipfile.ZipFile(dest, r'w', compress and zipfile.ZIP_DEFLATED or zipfile.ZIP_STORED) # Python's zipfile module emits deprecation warnings if we try # to store files with a date before 1980. epoch = 315532800 # calendar.timegm((1980, 1, 1, 0, 0, 0, 1, 1, 0)) if mtime < epoch: mtime = epoch self.mtime = mtime self.date_time = time.gmtime(mtime)[:6] def addfile(self, name, mode, islink, data): i = zipfile.ZipInfo(pycompat.fsdecode(name), self.date_time) i.compress_type = self.z.compression # unzip will not honor unix file modes unless file creator is # set to unix (id 3). i.create_system = 3 ftype = _UNX_IFREG if islink: mode = 0o777 ftype = _UNX_IFLNK i.external_attr = (mode | ftype) << 16 # add "extended-timestamp" extra block, because zip archives # without this will be extracted with unexpected timestamp, # if TZ is not configured as GMT i.extra += struct.pack('<hhBl', 0x5455, # block type: "extended-timestamp" 1 + 4, # size of this block 1, # "modification time is present" int(self.mtime)) # last modification (UTC) self.z.writestr(i, data) def done(self): self.z.close() class fileit(object): '''write archive as files in directory.''' def __init__(self, name, mtime): self.basedir = name self.opener = vfsmod.vfs(self.basedir) self.mtime = mtime def addfile(self, name, mode, islink, data): if islink: self.opener.symlink(data, name) return f = self.opener(name, "w", atomictemp=False) f.write(data) f.close() destfile = os.path.join(self.basedir, name) os.chmod(destfile, mode) if self.mtime is not None: os.utime(destfile, (self.mtime, self.mtime)) def done(self): pass archivers = { 'files': fileit, 'tar': tarit, 'tbz2': lambda name, mtime: tarit(name, mtime, 'bz2'), 'tgz': lambda name, mtime: tarit(name, mtime, 'gz'), 'uzip': lambda name, mtime: zipit(name, mtime, False), 'zip': zipit, } def archive(repo, dest, node, kind, decode=True, match=None, prefix='', mtime=None, subrepos=False): '''create archive of repo as it was at node. dest can be name of directory, name of archive file, or file object to write archive to. kind is type of archive to create. decode tells whether to put files through decode filters from hgrc. match is a matcher to filter names of files to write to archive. prefix is name of path to put before every archive member. mtime is the modified time, in seconds, or None to use the changeset time. subrepos tells whether to include subrepos. ''' if kind == 'files': if prefix: raise error.Abort(_('cannot give prefix when archiving to files')) else: prefix = tidyprefix(dest, kind, prefix) def write(name, mode, islink, getdata): data = getdata() if decode: data = repo.wwritedata(name, data) archiver.addfile(prefix + name, mode, islink, data) if kind not in archivers: raise error.Abort(_("unknown archive type '%s'") % kind) ctx = repo[node] archiver = archivers[kind](dest, mtime or ctx.date()[0]) if not match: match = scmutil.matchall(repo) if repo.ui.configbool("ui", "archivemeta"): name = '.hg_archival.txt' if match(name): write(name, 0o644, False, lambda: buildmetadata(ctx)) files = [f for f in ctx.manifest().matches(match)] total = len(files) if total: files.sort() scmutil.prefetchfiles(repo, [ctx.rev()], scmutil.matchfiles(repo, files)) progress = repo.ui.makeprogress(_('archiving'), unit=_('files'), total=total) progress.update(0) for f in files: ff = ctx.flags(f) write(f, 'x' in ff and 0o755 or 0o644, 'l' in ff, ctx[f].data) progress.increment(item=f) progress.complete() if subrepos: for subpath in sorted(ctx.substate): sub = ctx.workingsub(subpath) submatch = matchmod.subdirmatcher(subpath, match) subprefix = prefix + subpath + '/' total += sub.archive(archiver, subprefix, submatch, decode) if total == 0: raise error.Abort(_('no files match the archive pattern')) archiver.done() return total