Mercurial > hg
view mercurial/dagparser.py @ 42897:d7304434390f
changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Sun, 08 Sep 2019 09:42:53 +0200 |
parents | e7aa113b14f7 |
children | 2372284d9457 |
line wrap: on
line source
# dagparser.py - parser and generator for concise description of DAGs # # Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import re import string from .i18n import _ from . import ( error, pycompat, ) from .utils import ( stringutil, ) def parsedag(desc): '''parses a DAG from a concise textual description; generates events "+n" is a linear run of n nodes based on the current default parent "." is a single node based on the current default parent "$" resets the default parent to -1 (implied at the start); otherwise the default parent is always the last node created "<p" sets the default parent to the backref p "*p" is a fork at parent p, where p is a backref "*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs "/p2/.../pn" is a merge of the preceding node and p2..pn ":name" defines a label for the preceding node; labels can be redefined "@text" emits an annotation event for text "!command" emits an action event for the current node "!!my command\n" is like "!", but to the end of the line "#...\n" is a comment up to the end of the line Whitespace between the above elements is ignored. A backref is either * a number n, which references the node curr-n, where curr is the current node, or * the name of a label you placed earlier using ":name", or * empty to denote the default parent. All string valued-elements are either strictly alphanumeric, or must be enclosed in double quotes ("..."), with "\" as escape character. Generates sequence of ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', command) for actions (!) ('C', command) for line actions (!!) Examples -------- Example of a complex graph (output not shown for brevity): >>> len(list(parsedag(b""" ... ... +3 # 3 nodes in linear run ... :forkhere # a label for the last of the 3 nodes from above ... +5 # 5 more nodes on one branch ... :mergethis # label again ... <forkhere # set default parent to labeled fork node ... +10 # 10 more nodes on a parallel branch ... @stable # following nodes will be annotated as "stable" ... +5 # 5 nodes in stable ... !addfile # custom command; could trigger new file in next node ... +2 # two more nodes ... /mergethis # merge last node with labeled node ... +4 # 4 more nodes descending from merge node ... ... """))) 34 Empty list: >>> list(parsedag(b"")) [] A simple linear run: >>> list(parsedag(b"+3")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] Some non-standard ways to define such runs: >>> list(parsedag(b"+1+2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"+1*1*")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"*")) [('n', (0, [-1]))] >>> list(parsedag(b"...")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] A fork and a join, using numeric back references: >>> list(parsedag(b"+2*2*/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+2<2+1/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] Placing a label: >>> list(parsedag(b"+1 :mylabel +1")) [('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))] An empty label (silly, really): >>> list(parsedag(b"+1:+1")) [('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))] Fork and join, but with labels instead of numeric back references: >>> list(parsedag(b"+1:f +1:p2 *f */p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+1:f +1:p2 <f +1 /p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] Restarting from the root: >>> list(parsedag(b"+1 $ +1")) [('n', (0, [-1])), ('n', (1, [-1]))] Annotations, which are meant to introduce sticky state for subsequent nodes: >>> list(parsedag(b"+1 @ann +1")) [('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))] >>> list(parsedag(b'+1 @"my annotation" +1')) [('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))] Commands, which are meant to operate on the most recently created node: >>> list(parsedag(b"+1 !cmd +1")) [('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !"my command" +1')) [('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !!my command line\\n +1')) [('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))] Comments, which extend to the end of the line: >>> list(parsedag(b'+1 # comment\\n+1')) [('n', (0, [-1])), ('n', (1, [0]))] Error: >>> try: list(parsedag(b'+1 bad')) ... except Exception as e: print(pycompat.sysstr(bytes(e))) invalid character in dag description: bad... ''' if not desc: return wordchars = pycompat.bytestr(string.ascii_letters + string.digits) labels = {} p1 = -1 r = 0 def resolve(ref): if not ref: return p1 elif ref[0] in pycompat.bytestr(string.digits): return r - int(ref) else: return labels[ref] chiter = pycompat.iterbytestr(desc) def nextch(): return next(chiter, '\0') def nextrun(c, allow): s = '' while c in allow: s += c c = nextch() return c, s def nextdelimited(c, limit, escape): s = '' while c != limit: if c == escape: c = nextch() s += c c = nextch() return nextch(), s def nextstring(c): if c == '"': return nextdelimited(nextch(), '"', '\\') else: return nextrun(c, wordchars) c = nextch() while c != '\0': while c in pycompat.bytestr(string.whitespace): c = nextch() if c == '.': yield 'n', (r, [p1]) p1 = r r += 1 c = nextch() elif c == '+': c, digs = nextrun(nextch(), pycompat.bytestr(string.digits)) n = int(digs) for i in pycompat.xrange(0, n): yield 'n', (r, [p1]) p1 = r r += 1 elif c in '*/': if c == '*': c = nextch() c, pref = nextstring(c) prefs = [pref] while c == '/': c, pref = nextstring(nextch()) prefs.append(pref) ps = [resolve(ref) for ref in prefs] yield 'n', (r, ps) p1 = r r += 1 elif c == '<': c, ref = nextstring(nextch()) p1 = resolve(ref) elif c == ':': c, name = nextstring(nextch()) labels[name] = p1 yield 'l', (p1, name) elif c == '@': c, text = nextstring(nextch()) yield 'a', text elif c == '!': c = nextch() if c == '!': cmd = '' c = nextch() while c not in '\n\r\0': cmd += c c = nextch() yield 'C', cmd else: c, cmd = nextstring(c) yield 'c', cmd elif c == '#': while c not in '\n\r\0': c = nextch() elif c == '$': p1 = -1 c = nextch() elif c == '\0': return # in case it was preceded by whitespace else: s = '' i = 0 while c != '\0' and i < 10: s += c i += 1 c = nextch() raise error.Abort(_('invalid character in dag description: ' '%s...') % s) def dagtextlines(events, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates single lines for dagtext()''' def wrapstring(text): if re.match("^[0-9a-z]*$", text): return text return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"' def gen(): labels = {} run = 0 wantr = 0 needroot = False for kind, data in events: if kind == 'n': r, ps = data # sanity check if r != wantr: raise error.Abort(_("expected id %i, got %i") % (wantr, r)) if not ps: ps = [-1] else: for p in ps: if p >= r: raise error.Abort(_("parent id %i is larger than " "current id %i") % (p, r)) wantr += 1 # new root? p1 = r - 1 if len(ps) == 1 and ps[0] == -1: if needroot: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' yield '$' p1 = -1 else: needroot = True if len(ps) == 1 and ps[0] == p1: if usedots: yield "." else: run += 1 else: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' prefs = [] for p in ps: if p == p1: prefs.append('') elif p in labels: prefs.append(labels[p]) else: prefs.append('%d' % (r - p)) yield '*' + '/'.join(prefs) else: if run: yield '+%d' % run run = 0 if kind == 'l': rid, name = data labels[rid] = name yield ':' + name if wraplabels: yield '\n' elif kind == 'c': yield '!' + wrapstring(data) if wrapcommands: yield '\n' elif kind == 'C': yield '!!' + data yield '\n' elif kind == 'a': if wrapannotations: yield '\n' yield '@' + wrapstring(data) elif kind == '#': yield '#' + data yield '\n' else: raise error.Abort(_("invalid event type in dag: " "('%s', '%s')") % (stringutil.escapestr(kind), stringutil.escapestr(data))) if run: yield '+%d' % run line = '' for part in gen(): if part == '\n': if line: yield line line = '' else: if len(line) + len(part) >= maxlinewidth: yield line line = '' elif addspaces and line and part != '.': line += ' ' line += part if line: yield line def dagtext(dag, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates lines of a textual representation for a dag event stream events should generate what parsedag() does, so: ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', text) for commands ('C', text) for line commands ('!!') ('#', text) for comment lines Parent nodes must come before child nodes. Examples -------- Linear run: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0]))]) '+2' Two roots: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [-1]))]) '+1 $ +1' Fork and join: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0])), (b'n', (2, [0])), ... (b'n', (3, [2, 1]))]) '+2 *2 */2' Fork and join with labels: >>> dagtext([(b'n', (0, [-1])), (b'l', (0, b'f')), (b'n', (1, [0])), ... (b'l', (1, b'p2')), (b'n', (2, [0])), (b'n', (3, [2, 1]))]) '+1 :f +1 :p2 *f */p2' Annotations: >>> dagtext([(b'n', (0, [-1])), (b'a', b'ann'), (b'n', (1, [0]))]) '+1 @ann +1' >>> dagtext([(b'n', (0, [-1])), ... (b'a', b'my annotation'), ... (b'n', (1, [0]))]) '+1 @"my annotation" +1' Commands: >>> dagtext([(b'n', (0, [-1])), (b'c', b'cmd'), (b'n', (1, [0]))]) '+1 !cmd +1' >>> dagtext([(b'n', (0, [-1])), ... (b'c', b'my command'), ... (b'n', (1, [0]))]) '+1 !"my command" +1' >>> dagtext([(b'n', (0, [-1])), ... (b'C', b'my command line'), ... (b'n', (1, [0]))]) '+1 !!my command line\\n+1' Comments: >>> dagtext([(b'n', (0, [-1])), (b'#', b' comment'), (b'n', (1, [0]))]) '+1 # comment\\n+1' >>> dagtext([]) '' Combining parsedag and dagtext: >>> dagtext(parsedag(b'+1 :f +1 :p2 *f */p2')) '+1 :f +1 :p2 *f */p2' ''' return "\n".join(dagtextlines(dag, addspaces, wraplabels, wrapannotations, wrapcommands, wrapnonlinear, usedots, maxlinewidth))