changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
bundle w/o type option
$ hg init t1
$ hg init t2
$ cd t1
$ echo blablablablabla > file.txt
$ hg ci -Ama
adding file.txt
$ hg log | grep summary
summary: a
$ hg bundle ../b1 ../t2
searching for changes
1 changesets found
$ cd ../t2
$ hg unbundle ../b1
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets c35a0f9217e6 (1 drafts)
(run 'hg update' to get a working copy)
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log | grep summary
summary: a
$ cd ..
Unknown compression type is rejected
$ hg init t3
$ cd t3
$ hg -q unbundle ../b1
$ hg bundle -a -t unknown out.hg
abort: unknown is not a recognized bundle specification
(see 'hg help bundlespec' for supported values for --type)
[255]
$ hg bundle -a -t unknown-v2 out.hg
abort: unknown compression is not supported
(see 'hg help bundlespec' for supported values for --type)
[255]
$ cd ..
test bundle types
$ testbundle() {
> echo % test bundle type $1
> hg init t$1
> cd t1
> hg bundle -t $1 ../b$1 ../t$1
> f -q -B6 -D ../b$1; echo
> cd ../t$1
> hg debugbundle ../b$1
> hg debugbundle --spec ../b$1
> echo
> cd ..
> }
$ for t in "None" "bzip2" "gzip" "none-v2" "v2" "v1" "gzip-v1"; do
> testbundle $t
> done
% test bundle type None
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
none-v2
% test bundle type bzip2
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {Compression: BZ}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
bzip2-v2
% test bundle type gzip
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {Compression: GZ}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
gzip-v2
% test bundle type none-v2
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
none-v2
% test bundle type v2
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {Compression: BZ}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
bzip2-v2
% test bundle type v1
searching for changes
1 changesets found
HG10BZ
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
bzip2-v1
% test bundle type gzip-v1
searching for changes
1 changesets found
HG10GZ
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
gzip-v1
Compression level can be adjusted for bundle2 bundles
$ hg init test-complevel
$ cd test-complevel
$ cat > file0 << EOF
> this is a file
> with some text
> and some more text
> and other content
> EOF
$ cat > file1 << EOF
> this is another file
> with some other content
> and repeated, repeated, repeated, repeated content
> EOF
$ hg -q commit -A -m initial
$ hg bundle -a -t gzip-v2 gzip-v2.hg
1 changesets found
$ f --size gzip-v2.hg
gzip-v2.hg: size=468
$ hg --config experimental.bundlecomplevel=1 bundle -a -t gzip-v2 gzip-v2-level1.hg
1 changesets found
$ f --size gzip-v2-level1.hg
gzip-v2-level1.hg: size=475
$ hg --config experimental.bundlecomplevel.gzip=1 --config experimental.bundlelevel=9 bundle -a -t gzip-v2 gzip-v2-level1.hg
1 changesets found
$ f --size gzip-v2-level1.hg
gzip-v2-level1.hg: size=475
$ cd ..
#if zstd
$ for t in "zstd" "zstd-v2"; do
> testbundle $t
> done
% test bundle type zstd
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {Compression: ZS}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
zstd-v2
% test bundle type zstd-v2
searching for changes
1 changesets found
HG20\x00\x00 (esc)
Stream params: {Compression: ZS}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
c35a0f9217e65d1fdb90c936ffa7dbe679f83ddf
cache:rev-branch-cache -- {} (mandatory: False)
zstd-v2
Explicit request for zstd on non-generaldelta repos
$ hg --config format.usegeneraldelta=false init nogd
$ hg -q -R nogd pull t1
$ hg -R nogd bundle -a -t zstd nogd-zstd
1 changesets found
zstd-v1 always fails
$ hg -R tzstd bundle -a -t zstd-v1 zstd-v1
abort: compression engine zstd is not supported on v1 bundles
(see 'hg help bundlespec' for supported values for --type)
[255]
#else
zstd is a valid engine but isn't available
$ hg -R t1 bundle -a -t zstd irrelevant.hg
abort: compression engine zstd could not be loaded
[255]
#endif
test garbage file
$ echo garbage > bgarbage
$ hg init tgarbage
$ cd tgarbage
$ hg pull ../bgarbage
pulling from ../bgarbage
abort: ../bgarbage: not a Mercurial bundle
[255]
$ cd ..
test invalid bundle type
$ cd t1
$ hg bundle -a -t garbage ../bgarbage
abort: garbage is not a recognized bundle specification
(see 'hg help bundlespec' for supported values for --type)
[255]
$ cd ..