changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
#require icasefs
################################
test for branch merging
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file:
this is also case for issue3370.
$ hg init branch_merge_renaming
$ cd branch_merge_renaming
$ echo a > a
$ hg add a
$ echo b > b
$ hg add b
$ hg commit -m '#0'
$ hg tag -l A
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg tag -l B
$ hg update -q 0
$ touch x
$ hg add x
$ hg commit -m '#2'
created new head
$ hg tag -l C
$ hg merge -q
$ hg status -A
M A
R a
C b
C x
$ hg update -q --clean 1
$ hg merge -q
$ hg status -A
M x
C A
C b
$ hg commit -m '(D)'
$ hg tag -l D
additional test for issue3452:
| this assumes the history below.
|
| (A) -- (C) -- (E) -------
| \ \ \
| \ \ \
| (B) -- (D) -- (F) -- (G)
|
| A: add file 'a'
| B: rename from 'a' to 'A'
| C: add 'x' (or operation other than modification of 'a')
| D: merge C into B
| E: modify 'a'
| F: modify 'A'
| G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)
$ hg update -q --clean C
$ echo "modify 'a' at (E)" > a
$ echo "modify 'b' at (E)" > b
$ hg commit -m '(E)'
created new head
$ hg tag -l E
$ hg update -q --clean D
$ echo "modify 'A' at (F)" > A
$ hg commit -m '(F)'
$ hg tag -l F
$ hg merge -q --tool internal:other E
$ hg status -A
M A
a
M b
C x
$ cat A
modify 'a' at (E)
test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.
to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.
$ hg update -q --clean A
$ hg rename b tmp
$ hg rename tmp B
$ hg commit -m '(B1)'
created new head
$ hg tag -l B1
$ hg merge -q C
$ hg status -A
M x
C B
C a
$ hg commit -m '(D1)'
$ hg tag -l D1
$ echo "modify 'B' at (F1)" > B
$ hg commit -m '(F1)'
$ hg tag -l F1
$ hg merge -q --tool internal:other E
$ hg status -A
M B
b
M a
C x
$ cat B
modify 'b' at (E)
$ cd ..
(2) colliding file is not related to collided file
$ hg init branch_merge_collding
$ cd branch_merge_collding
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update --clean 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo x > x
$ hg add x
$ hg commit -m '#3'
created new head
$ echo 'modified at #4' > a
$ hg commit -m '#4'
$ hg merge
abort: case-folding collision between [aA] and [Aa] (re)
[255]
$ hg parents --template '{rev}\n'
4
$ hg status -A
C a
C x
$ cat a
modified at #4
$ hg update --clean 2
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg merge
abort: case-folding collision between [aA] and [Aa] (re)
[255]
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.
$ hg update --clean 3
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M A
R a
C x
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M x
C A
$ cd ..
Prepare for tests of directory case-folding collisions
$ hg init directory-casing
$ cd directory-casing
$ touch 0 # test: file without directory
$ mkdir 0a
$ touch 0a/f
$ mkdir aA
$ touch aA/a
$ hg ci -Aqm0
Directory/file case-folding collision:
$ hg up -q null
$ touch 00 # test: starts as '0'
$ mkdir 000 # test: starts as '0'
$ touch 000/f
$ touch Aa # test: collision with 'aA/a'
$ hg ci -Aqm1
$ hg merge 0
abort: case-folding collision between Aa and directory of aA/a
[255]
(note: no collision between 0 and 00 or 000/f)
Directory case-folding collision:
$ hg up -qC null
$ hg --config extensions.purge= purge
$ mkdir 0A0
$ touch 0A0/f # test: starts as '0a'
$ mkdir Aa
$ touch Aa/b # test: collision with 'aA/a'
$ hg ci -Aqm2
$ hg merge 0
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
################################
test for linear updates
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file
$ hg init linearupdate_renameaware_1
$ cd linearupdate_renameaware_1
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo 'this is added line' >> a
$ hg update 1
merging a and A to A
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
$ hg status -A
M A
$ cat A
a
this is added line
$ cd ..
(2) colliding file is not related to collided file
$ hg init linearupdate_renameaware_2
$ cd linearupdate_renameaware_2
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat A
a
$ hg up -qC 2
$ hg update --check 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat a
a
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
$ cd ..
(3) colliding file is not related to collided file: added in working dir
$ hg init linearupdate_renameaware_3
$ cd linearupdate_renameaware_3
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a b
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo B > B
$ hg add B
$ hg status
A B
$ hg update
abort: case-folding collision between [bB] and [Bb] (re)
[255]
$ hg update --check
abort: uncommitted changes
[255]
$ hg update --clean
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
1
$ hg status -A
C b
$ cat b
a
$ cd ..