changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
$ hg init
$ cat << EOF > a
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ hg add a
$ hg commit -m ancestor
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ hg commit -m branch1
$ hg co 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
$ hg commit -m branch2
created new head
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg id
618808747361+c0c68e4fe667+ tip
$ echo "[commands]" >> $HGRCPATH
$ echo "status.verbose=true" >> $HGRCPATH
$ hg status
M a
? a.orig
# The repository is in an unfinished *merge* state.
# Unresolved merge conflicts:
#
# a
#
# To mark files as resolved: hg resolve --mark FILE
# To continue: hg commit
# To abort: hg merge --abort
$ hg status -Tjson
[
{
"path": "a",
"status": "M"
},
{
"path": "a.orig",
"status": "?"
}
]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 618808747361 - test: branch2
6
8
=======
4
5
>>>>>>> merge rev: c0c68e4fe667 - test: branch1
Hop we are done.
$ hg status --config commands.status.verbose=0
M a
? a.orig
Verify custom conflict markers
$ hg up -q --clean .
$ cat <<EOF >> .hg/hgrc
> [ui]
> mergemarkertemplate = '{author} {rev}'
> EOF
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line splitting of custom conflict marker which causes multiple lines
$ hg up -q --clean .
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
> EOF
$ hg -q merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line trimming of custom conflict marker using multi-byte characters
$ hg up -q --clean .
$ "$PYTHON" <<EOF
> fp = open('logfile', 'wb')
> fp.write(b'12345678901234567890123456789012345678901234567890' +
> b'1234567890') # there are 5 more columns for 80 columns
>
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
>
> fp.close()
> EOF
$ hg add logfile
$ hg --encoding utf-8 commit --logfile logfile
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={desc|firstline}
> EOF
$ hg -q --encoding utf-8 merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
6
8
=======
4
5
>>>>>>> merge rev: branch1
Hop we are done.
Verify basic conflict markers
$ hg up -q --clean 2
$ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy
6
8
=======
4
5
>>>>>>> merge rev
Hop we are done.
internal:merge3
$ hg up -q --clean .
$ hg merge 1 --tool internal:merge3
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
<<<<<<< working copy
1
2
3
6
8
||||||| base
One
Two
Three
Four
Five
=======
1
2
3
4
5
>>>>>>> merge rev
Hop we are done.
Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other
$ hg up -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
1 other heads for branch "default"
$ printf "\n\nEnd of file\n" >> a
$ hg ci -m "Add some stuff at the end"
$ hg up -r 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "Start of file\n\n\n" > tmp
$ cat a >> tmp
$ mv tmp a
$ hg ci -m "Add some stuff at the beginning"
Now test :merge-other and :merge-local
$ hg merge
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg resolve --tool :merge-other a
merging a
(no more unresolved files)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
6
8
Hop we are done.
End of file
$ hg up -C
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
updated to "18b51d585961: Add some stuff at the beginning"
1 other heads for branch "default"
$ hg merge --tool :merge-local
merging a
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
4
5
Hop we are done.
End of file