changegroup: move message about added changes to transaction summary
Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:
adding changesets
adding manifests
adding file changes
added 32768 changesets with 60829 changes to 2668 files
adding changesets
adding manifests
adding file changes
added 8192 changesets with 16885 changes to 1553 files
adding changesets
adding manifests
adding file changes
added 1020 changesets with 1799 changes to 536 files
adding changesets
adding manifests
...
Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.
There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.
This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.
To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.
#testcases stripbased phasebased
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [defaults]
> diff = --nodates --git
> qnew = --date '0 0'
> [shelve]
> maxbackups = 2
> EOF
#if phasebased
$ cat <<EOF >> $HGRCPATH
> [format]
> internal-phase = yes
> EOF
#endif
$ hg init repo
$ cd repo
$ mkdir a b
$ echo a > a/a
$ echo b > b/b
$ echo c > c
$ echo d > d
$ echo x > x
$ hg addremove -q
shelve has a help message
$ hg shelve -h
hg shelve [OPTION]... [FILE]...
save and set aside changes from the working directory
Shelving takes files that "hg status" reports as not clean, saves the
modifications to a bundle (a shelved change), and reverts the files so
that their state in the working directory becomes clean.
To restore these changes to the working directory, using "hg unshelve";
this will work even if you switch to a different commit.
When no files are specified, "hg shelve" saves all not-clean files. If
specific files or directories are named, only changes to those files are
shelved.
In bare shelve (when no files are specified, without interactive, include
and exclude option), shelving remembers information if the working
directory was on newly created branch, in other words working directory
was on different branch than its first parent. In this situation
unshelving restores branch information to the working directory.
Each shelved change has a name that makes it easier to find later. The
name of a shelved change defaults to being based on the active bookmark,
or if there is no active bookmark, the current named branch. To specify a
different name, use "--name".
To see a list of existing shelved changes, use the "--list" option. For
each shelved change, this will print its name, age, and description; use "
--patch" or "--stat" for more details.
To delete specific shelved changes, use "--delete". To delete all shelved
changes, use "--cleanup".
options ([+] can be repeated):
-A --addremove mark new/missing files as added/removed before
shelving
-u --unknown store unknown files in the shelve
--cleanup delete all shelved changes
--date DATE shelve with the specified commit date
-d --delete delete the named shelved change(s)
-e --edit invoke editor on commit messages
-k --keep shelve, but keep changes in the working directory
-l --list list current shelves
-m --message TEXT use text as shelve message
-n --name NAME use the given name for the shelved commit
-p --patch output patches for changes (provide the names of the
shelved changes as positional arguments)
-i --interactive interactive mode
--stat output diffstat-style summary of changes (provide
the names of the shelved changes as positional
arguments)
-I --include PATTERN [+] include names matching the given patterns
-X --exclude PATTERN [+] exclude names matching the given patterns
--mq operate on patch repository
(some details hidden, use --verbose to show complete help)
shelving in an empty repo should be possible
(this tests also that editor is not invoked, if '--edit' is not
specified)
$ HGEDITOR=cat hg shelve
shelved as default
0 files updated, 0 files merged, 5 files removed, 0 files unresolved
$ hg unshelve
unshelving change 'default'
$ hg commit -q -m 'initial commit'
$ hg shelve
nothing changed
[1]
make sure shelve files were backed up
$ ls .hg/shelve-backup
default.hg
default.patch
default.shelve
checks to make sure we dont create a directory or
hidden file while choosing a new shelve name
when we are given a name
$ hg shelve -n foo/bar
abort: shelved change names can not contain slashes
[255]
$ hg shelve -n .baz
abort: shelved change names can not start with '.'
[255]
$ hg shelve -n foo\\bar
abort: shelved change names can not contain slashes
[255]
when shelve has to choose itself
$ hg branch x/y -q
$ hg commit -q -m "Branch commit 0"
$ hg shelve
nothing changed
[1]
$ hg branch .x -q
$ hg commit -q -m "Branch commit 1"
$ hg shelve
nothing changed
[1]
$ hg branch x\\y -q
$ hg commit -q -m "Branch commit 2"
$ hg shelve
nothing changed
[1]
cleaning the branches made for name checking tests
$ hg up default -q
$ hg strip e9177275307e+6a6d231f43d+882bae7c62c2 -q
create an mq patch - shelving should work fine with a patch applied
$ echo n > n
$ hg add n
$ hg commit n -m second
$ hg qnew second.patch
shelve a change that we will delete later
$ echo a >> a/a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
set up some more complex changes to shelve
$ echo a >> a/a
$ hg mv b b.rename
moving b/b to b.rename/b
$ hg cp c c.copy
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
the common case - no options or filenames
$ hg shelve
shelved as default-01
2 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg status -C
ensure that our shelved changes exist
$ hg shelve -l
default-01 (*)* changes to: [mq]: second.patch (glob)
default (*)* changes to: [mq]: second.patch (glob)
$ hg shelve -l -p default
default (*)* changes to: [mq]: second.patch (glob)
diff --git a/a/a b/a/a
--- a/a/a
+++ b/a/a
@@ -1,1 +1,2 @@
a
+a
$ hg shelve --list --addremove
abort: options '--list' and '--addremove' may not be used together
[255]
delete our older shelved change
$ hg shelve -d default
$ hg qfinish -a -q
ensure shelve backups aren't overwritten
$ ls .hg/shelve-backup/
default-1.hg
default-1.patch
default-1.shelve
default.hg
default.patch
default.shelve
local edits should not prevent a shelved change from applying
$ printf "z\na\n" > a/a
$ hg unshelve --keep
unshelving change 'default-01'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
merging a/a
$ hg revert --all -q
$ rm a/a.orig b.rename/b c.copy
apply it and make sure our state is as expected
(this also tests that same timestamp prevents backups from being
removed, even though there are more than 'maxbackups' backups)
$ f -t .hg/shelve-backup/default.patch
.hg/shelve-backup/default.patch: file
$ touch -t 200001010000 .hg/shelve-backup/default.patch
$ f -t .hg/shelve-backup/default-1.patch
.hg/shelve-backup/default-1.patch: file
$ touch -t 200001010000 .hg/shelve-backup/default-1.patch
$ hg unshelve
unshelving change 'default-01'
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
$ hg shelve -l
(both of default.hg and default-1.hg should be still kept, because it
is difficult to decide actual order of them from same timestamp)
$ ls .hg/shelve-backup/
default-01.hg
default-01.patch
default-01.shelve
default-1.hg
default-1.patch
default-1.shelve
default.hg
default.patch
default.shelve
$ hg unshelve
abort: no shelved changes to apply!
[255]
$ hg unshelve foo
abort: shelved change 'foo' not found
[255]
named shelves, specific filenames, and "commit messages" should all work
(this tests also that editor is invoked, if '--edit' is specified)
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
$ HGEDITOR=cat hg shelve -q -n wibble -m wat -e a
wat
HG: Enter commit message. Lines beginning with 'HG:' are removed.
HG: Leave message empty to abort commit.
HG: --
HG: user: shelve@localhost
HG: branch 'default'
HG: changed a/a
expect "a" to no longer be present, but status otherwise unchanged
$ hg status -C
A b.rename/b
b/b
A c.copy
c
R b/b
$ hg shelve -l --stat
wibble (*) wat (glob)
a/a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
and now "a/a" should reappear
$ cd a
$ hg unshelve -q wibble
$ cd ..
$ hg status -C
M a/a
A b.rename/b
b/b
A c.copy
c
R b/b
ensure old shelve backups are being deleted automatically
$ ls .hg/shelve-backup/
default-01.hg
default-01.patch
default-01.shelve
wibble.hg
wibble.patch
wibble.shelve
cause unshelving to result in a merge with 'a' conflicting
$ hg shelve -q
$ echo c>>a/a
$ hg commit -m second
$ hg tip --template '{files}\n'
a/a
add an unrelated change that should be preserved
$ mkdir foo
$ echo foo > foo/foo
$ hg add foo/foo
force a conflicted merge to occur
$ hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
merging a/a
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg status -v
M a/a
M b.rename/b
M c.copy
R b/b
? a/a.orig
# The repository is in an unfinished *unshelve* state.
# Unresolved merge conflicts:
#
# a/a
#
# To mark files as resolved: hg resolve --mark FILE
# To continue: hg unshelve --continue
# To abort: hg unshelve --abort
ensure that we have a merge with unresolved conflicts
#if phasebased
$ hg heads -q --template '{rev}\n'
8
5
$ hg parents -q --template '{rev}\n'
8
5
#endif
#if stripbased
$ hg heads -q --template '{rev}\n'
5
4
$ hg parents -q --template '{rev}\n'
4
5
#endif
$ hg status
M a/a
M b.rename/b
M c.copy
R b/b
? a/a.orig
$ hg diff
diff --git a/a/a b/a/a
--- a/a/a
+++ b/a/a
@@ -1,2 +1,6 @@
a
+<<<<<<< shelve: 2377350b6337 - shelve: pending changes temporary commit
c
+=======
+a
+>>>>>>> working-copy: a68ec3400638 - shelve: changes to: [mq]: second.patch
diff --git a/b/b b/b.rename/b
rename from b/b
rename to b.rename/b
diff --git a/c b/c.copy
copy from c
copy to c.copy
$ hg resolve -l
U a/a
$ hg shelve
abort: unshelve already in progress
(use 'hg unshelve --continue' or 'hg unshelve --abort')
[255]
abort the unshelve and be happy
$ hg status
M a/a
M b.rename/b
M c.copy
R b/b
? a/a.orig
$ hg unshelve -a
unshelve of 'default' aborted
$ hg heads -q
[37]:2e69b451d1ea (re)
$ hg parents
changeset: [37]:2e69b451d1ea (re)
tag: tip
parent: 3:509104101065 (?)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: second
$ hg resolve -l
$ hg status
A foo/foo
? a/a.orig
try to continue with no unshelve underway
$ hg unshelve -c
abort: no unshelve in progress
[255]
$ hg status
A foo/foo
? a/a.orig
redo the unshelve to get a conflict
$ hg unshelve -q
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
attempt to continue
$ hg unshelve -c
abort: unresolved conflicts, can't continue
(see 'hg resolve', then 'hg unshelve --continue')
[255]
$ hg revert -r . a/a
$ hg resolve -m a/a
(no more unresolved files)
continue: hg unshelve --continue
$ hg commit -m 'commit while unshelve in progress'
abort: unshelve already in progress
(use 'hg unshelve --continue' or 'hg unshelve --abort')
[255]
$ hg graft --continue
abort: no graft in progress
(continue: hg unshelve --continue)
[255]
$ hg unshelve -c
unshelve of 'default' complete
ensure the repo is as we hope
$ hg parents
changeset: [37]:2e69b451d1ea (re)
tag: tip
parent: 3:509104101065 (?)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: second
$ hg heads -q
[37]:2e69b451d1ea (re)
$ hg status -C
A b.rename/b
b/b
A c.copy
c
A foo/foo
R b/b
? a/a.orig
there should be no shelves left
$ hg shelve -l
#if execbit
ensure that metadata-only changes are shelved
$ chmod +x a/a
$ hg shelve -q -n execbit a/a
$ hg status a/a
$ hg unshelve -q execbit
$ hg status a/a
M a/a
$ hg revert a/a
#else
Dummy shelve op, to keep rev numbers aligned
$ echo foo > a/a
$ hg shelve -q -n dummy a/a
$ hg unshelve -q dummy
$ hg revert a/a
#endif
#if symlink
$ rm a/a
$ ln -s foo a/a
$ hg shelve -q -n symlink a/a
$ hg status a/a
$ hg unshelve -q -n symlink
$ hg status a/a
M a/a
$ hg revert a/a
#else
Dummy shelve op, to keep rev numbers aligned
$ echo bar > a/a
$ hg shelve -q -n dummy a/a
$ hg unshelve -q dummy
$ hg revert a/a
#endif
set up another conflict between a commit and a shelved change
$ hg revert -q -C -a
$ rm a/a.orig b.rename/b c.copy
$ echo a >> a/a
$ hg shelve -q
$ echo x >> a/a
$ hg ci -m 'create conflict'
$ hg add foo/foo
if we resolve a conflict while unshelving, the unshelve should succeed
$ hg unshelve --tool :merge-other --keep
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
merging a/a
$ hg parents -q
(4|13):33f7f61e6c5e (re)
$ hg shelve -l
default (*)* changes to: second (glob)
$ hg status
M a/a
A foo/foo
$ cat a/a
a
c
a
$ cat > a/a << EOF
> a
> c
> x
> EOF
$ HGMERGE=true hg unshelve
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
merging a/a
note: unshelved changes already existed in the working copy
$ hg parents -q
(4|13):33f7f61e6c5e (re)
$ hg shelve -l
$ hg status
A foo/foo
$ cat a/a
a
c
x
test keep and cleanup
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg shelve --list
default (*)* changes to: create conflict (glob)
$ hg unshelve -k
unshelving change 'default'
$ hg shelve --list
default (*)* changes to: create conflict (glob)
$ hg shelve --cleanup
$ hg shelve --list
$ hg shelve --cleanup --delete
abort: options '--cleanup' and '--delete' may not be used together
[255]
$ hg shelve --cleanup --patch
abort: options '--cleanup' and '--patch' may not be used together
[255]
$ hg shelve --cleanup --message MESSAGE
abort: options '--cleanup' and '--message' may not be used together
[255]
test bookmarks
$ hg bookmark test
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg shelve
shelved as test
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg unshelve
unshelving change 'test'
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
shelve should still work even if mq is disabled
$ hg --config extensions.mq=! shelve
shelved as test
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg --config extensions.mq=! shelve --list
test (*)* changes to: create conflict (glob)
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg --config extensions.mq=! unshelve
unshelving change 'test'
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
Recreate some conflict again
$ hg up -C -r 2e69b451d1ea
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark test)
$ echo y >> a/a
$ hg shelve
shelved as default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg up test
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(activating bookmark test)
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg unshelve
unshelving change 'default'
rebasing shelved changes
merging a/a
warning: conflicts while merging a/a! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ hg bookmark
test (4|13):33f7f61e6c5e (re)
Test that resolving all conflicts in one direction (so that the rebase
is a no-op), works (issue4398)
$ hg revert -a -r .
reverting a/a
$ hg resolve -m a/a
(no more unresolved files)
continue: hg unshelve --continue
$ hg unshelve -c
note: unshelved changes already existed in the working copy
unshelve of 'default' complete
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg diff
$ hg status
? a/a.orig
? foo/foo
$ hg summary
parent: (4|13):33f7f61e6c5e tip (re)
create conflict
branch: default
bookmarks: *test
commit: 2 unknown (clean)
update: (current)
phases: 5 draft
$ hg shelve --delete --stat
abort: options '--delete' and '--stat' may not be used together
[255]
$ hg shelve --delete --name NAME
abort: options '--delete' and '--name' may not be used together
[255]
Test interactive shelve
$ cat <<EOF >> $HGRCPATH
> [ui]
> interactive = true
> EOF
$ echo 'a' >> a/b
$ cat a/a >> a/b
$ echo 'x' >> a/b
$ mv a/b a/a
$ echo 'a' >> foo/foo
$ hg st
M a/a
? a/a.orig
? foo/foo
$ cat a/a
a
a
c
x
x
$ cat foo/foo
foo
a
$ hg shelve --interactive --config ui.interactive=false
abort: running non-interactively
[255]
$ hg shelve --interactive << EOF
> y
> y
> n
> EOF
diff --git a/a/a b/a/a
2 hunks, 2 lines changed
examine changes to 'a/a'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,3 +1,4 @@
+a
a
c
x
record change 1/2 to 'a/a'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,3 +2,4 @@
a
c
x
+x
record change 2/2 to 'a/a'?
(enter ? for help) [Ynesfdaq?] n
shelved as test
merging a/a
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
$ cat a/a
a
c
x
x
$ cat foo/foo
foo
a
$ hg st
M a/a
? foo/foo
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ hg unshelve
unshelving change 'test'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
merging a/a
$ hg bookmark
\* test (4|13):33f7f61e6c5e (re)
$ cat a/a
a
a
c
x
x
shelve --patch and shelve --stat should work with valid shelfnames
$ hg up --clean .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark test)
$ hg shelve --list
$ echo 'patch a' > shelf-patch-a
$ hg add shelf-patch-a
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo 'patch b' > shelf-patch-b
$ hg add shelf-patch-b
$ hg shelve
shelved as default-01
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg shelve --patch default default-01
default-01 (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-b b/shelf-patch-b
new file mode 100644
--- /dev/null
+++ b/shelf-patch-b
@@ -0,0 +1,1 @@
+patch b
default (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-a b/shelf-patch-a
new file mode 100644
--- /dev/null
+++ b/shelf-patch-a
@@ -0,0 +1,1 @@
+patch a
$ hg shelve --stat default default-01
default-01 (*)* changes to: create conflict (glob)
shelf-patch-b | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
default (*)* changes to: create conflict (glob)
shelf-patch-a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve --patch default
default (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-a b/shelf-patch-a
new file mode 100644
--- /dev/null
+++ b/shelf-patch-a
@@ -0,0 +1,1 @@
+patch a
$ hg shelve --stat default
default (*)* changes to: create conflict (glob)
shelf-patch-a | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve --patch nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
$ hg shelve --stat nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
$ hg shelve --patch default nonexistentshelf
abort: cannot find shelf nonexistentshelf
[255]
when the user asks for a patch, we assume they want the most recent shelve if
they don't provide a shelve name
$ hg shelve --patch
default-01 (*)* changes to: create conflict (glob)
diff --git a/shelf-patch-b b/shelf-patch-b
new file mode 100644
--- /dev/null
+++ b/shelf-patch-b
@@ -0,0 +1,1 @@
+patch b
$ cd ..
Shelve from general delta repo uses bundle2 on disk
--------------------------------------------------
no general delta
$ hg clone --pull repo bundle1 --config format.usegeneraldelta=0
requesting all changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 8 changes to 6 files
new changesets cc01e2b0c59f:33f7f61e6c5e
updating to branch default
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd bundle1
$ echo babar > jungle
$ hg add jungle
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg debugbundle .hg/shelved/*.hg
330882a04d2ce8487636b1fb292e5beea77fa1e3
$ cd ..
with general delta
$ hg clone --pull repo bundle2 --config format.usegeneraldelta=1
requesting all changes
adding changesets
adding manifests
adding file changes
added 5 changesets with 8 changes to 6 files
new changesets cc01e2b0c59f:33f7f61e6c5e
updating to branch default
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd bundle2
$ echo babar > jungle
$ hg add jungle
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg debugbundle .hg/shelved/*.hg
Stream params: {Compression: BZ}
changegroup -- {nbchanges: 1, version: 02} (mandatory: True)
330882a04d2ce8487636b1fb292e5beea77fa1e3
Test shelve --keep
$ hg unshelve
unshelving change 'default'
$ hg shelve --keep --list
abort: options '--list' and '--keep' may not be used together
[255]
$ hg shelve --keep --patch
abort: options '--patch' and '--keep' may not be used together
[255]
$ hg shelve --keep --delete
abort: options '--delete' and '--keep' may not be used together
[255]
$ hg shelve --keep
shelved as default
$ hg diff
diff --git a/jungle b/jungle
new file mode 100644
--- /dev/null
+++ b/jungle
@@ -0,0 +1,1 @@
+babar
$ cd ..
Test visibility of in-memory changes inside transaction to external hook
------------------------------------------------------------------------
$ cd repo
$ echo xxxx >> x
$ hg commit -m "#5: changes to invoke rebase"
$ cat > $TESTTMP/checkvisibility.sh <<EOF
> echo "==== \$1:"
> hg parents --template "VISIBLE {rev}:{node|short}\n"
> # test that pending changes are hidden
> unset HG_PENDING
> hg parents --template "ACTUAL {rev}:{node|short}\n"
> echo "===="
> EOF
$ cat >> .hg/hgrc <<EOF
> [defaults]
> # to fix hash id of temporary revisions
> unshelve = --date '0 0'
> EOF
"hg unshelve" at REV5 implies steps below:
(1) commit changes in the working directory (REV6)
(2) unbundle shelved revision (REV7)
(3) rebase: merge REV7 into REV6 (REV6 => REV6, REV7)
(4) rebase: commit merged revision (REV8)
(5) rebase: update to REV6 (REV8 => REV6)
(6) update to REV5 (REV6 => REV5)
(7) abort transaction
== test visibility to external preupdate hook
$ cat >> .hg/hgrc <<EOF
> [hooks]
> preupdate.visibility = sh $TESTTMP/checkvisibility.sh preupdate
> EOF
$ echo nnnn >> n
$ sh $TESTTMP/checkvisibility.sh before-unshelving
==== before-unshelving:
VISIBLE (5|19):703117a2acfb (re)
ACTUAL (5|19):703117a2acfb (re)
====
$ hg unshelve --keep default
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
==== preupdate:
VISIBLE (6|20):54c00d20fb3f (re)
ACTUAL (5|19):703117a2acfb (re)
====
==== preupdate:
VISIBLE (8|21):8efe6f7537dc (re)
ACTUAL (5|19):703117a2acfb (re)
====
==== preupdate:
VISIBLE (6|20):54c00d20fb3f (re)
ACTUAL (5|19):703117a2acfb (re)
====
$ cat >> .hg/hgrc <<EOF
> [hooks]
> preupdate.visibility =
> EOF
$ sh $TESTTMP/checkvisibility.sh after-unshelving
==== after-unshelving:
VISIBLE (5|19):703117a2acfb (re)
ACTUAL (5|19):703117a2acfb (re)
====
== test visibility to external update hook
$ hg update -q -C 703117a2acfb
$ cat >> .hg/hgrc <<EOF
> [hooks]
> update.visibility = sh $TESTTMP/checkvisibility.sh update
> EOF
$ echo nnnn >> n
$ sh $TESTTMP/checkvisibility.sh before-unshelving
==== before-unshelving:
VISIBLE (5|19):703117a2acfb (re)
ACTUAL (5|19):703117a2acfb (re)
====
$ hg unshelve --keep default
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
==== update:
VISIBLE (6|20):54c00d20fb3f (re)
VISIBLE 1?7:492ed9d705e5 (re)
ACTUAL (5|19):703117a2acfb (re)
====
==== update:
VISIBLE (6|20):54c00d20fb3f (re)
ACTUAL (5|19):703117a2acfb (re)
====
==== update:
VISIBLE (5|19):703117a2acfb (re)
ACTUAL (5|19):703117a2acfb (re)
====
$ cat >> .hg/hgrc <<EOF
> [hooks]
> update.visibility =
> EOF
$ sh $TESTTMP/checkvisibility.sh after-unshelving
==== after-unshelving:
VISIBLE (5|19):703117a2acfb (re)
ACTUAL (5|19):703117a2acfb (re)
====
$ cd ..
Keep active bookmark while (un)shelving even on shared repo (issue4940)
-----------------------------------------------------------------------
$ cat <<EOF >> $HGRCPATH
> [extensions]
> share =
> EOF
$ hg bookmarks -R repo
test (4|13):33f7f61e6c5e (re)
$ hg share -B repo share
updating working directory
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd share
$ hg bookmarks
test (4|13):33f7f61e6c5e (re)
$ hg bookmarks foo
$ hg bookmarks
\* foo (5|19):703117a2acfb (re)
test (4|13):33f7f61e6c5e (re)
$ echo x >> x
$ hg shelve
shelved as foo
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg bookmarks
\* foo (5|19):703117a2acfb (re)
test (4|13):33f7f61e6c5e (re)
$ hg unshelve
unshelving change 'foo'
$ hg bookmarks
\* foo (5|19):703117a2acfb (re)
test (4|13):33f7f61e6c5e (re)
$ cd ..
Abort unshelve while merging (issue5123)
----------------------------------------
$ hg init issue5123
$ cd issue5123
$ echo > a
$ hg ci -Am a
adding a
$ hg co null
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo > b
$ hg ci -Am b
adding b
created new head
$ echo > c
$ hg add c
$ hg shelve
shelved as default
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg co 1
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
-- successful merge with two parents
$ hg log -G
@ changeset: 1:406bf70c274f
tag: tip
parent: -1:000000000000
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: b
@ changeset: 0:ada8c9eb8252
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: a
-- trying to pull in the shelve bits
-- unshelve should abort otherwise, it'll eat my second parent.
$ hg unshelve
abort: outstanding uncommitted merge
(use 'hg commit' or 'hg merge --abort')
[255]
$ cd ..
-- test for interactive mode on unshelve
$ hg init a
$ cd a
$ echo > b
$ hg ci -Am b
adding b
$ echo > c
$ echo > d
$ hg add .
adding c
adding d
$ hg shelve
shelved as default
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ echo > e
$ hg add e
$ hg ci -m e
$ hg shelve --patch
default (*s ago) changes to: b (glob)
diff --git a/c b/c
new file mode 100644
--- /dev/null
+++ b/c
@@ -0,0 +1,1 @@
+
diff --git a/d b/d
new file mode 100644
--- /dev/null
+++ b/d
@@ -0,0 +1,1 @@
+
$ hg unshelve -i <<EOF
> y
> y
> y
> n
> EOF
unshelving change 'default'
rebasing shelved changes
diff --git a/c b/c
new file mode 100644
examine changes to 'c'?
(enter ? for help) [Ynesfdaq?] y
@@ -0,0 +1,1 @@
+
record change 1/2 to 'c'?
(enter ? for help) [Ynesfdaq?] y
diff --git a/d b/d
new file mode 100644
examine changes to 'd'?
(enter ? for help) [Ynesfdaq?] y
@@ -0,0 +1,1 @@
+
record change 2/2 to 'd'?
(enter ? for help) [Ynesfdaq?] n
$ ls
b
c
e
-- shelve should not contain `c` now
$ hg shelve --patch
default (*s ago) changes to: b (glob)
diff --git a/d b/d
new file mode 100644
--- /dev/null
+++ b/d
@@ -0,0 +1,1 @@
+
$ hg unshelve -i <<EOF
> y
> y
> EOF
unshelving change 'default'
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
diff --git a/d b/d
new file mode 100644
examine changes to 'd'?
(enter ? for help) [Ynesfdaq?] y
@@ -0,0 +1,1 @@
+
record this change to 'd'?
(enter ? for help) [Ynesfdaq?] y
$ hg status -v
A c
A d
$ ls
b
c
d
e
$ hg shelve --list
-- now, unshelve selected changes from a file
$ echo B > foo
$ hg add foo
$ hg ci -m 'add B to foo'
$ cat > foo <<EOF
> A
> B
> C
> EOF
$ echo > garbage
$ hg st
M foo
? garbage
$ hg shelve --unknown
shelved as default
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ cat foo
B
$ hg unshelve -i <<EOF
> y
> y
> n
> y
> y
> EOF
unshelving change 'default'
rebasing shelved changes
diff --git a/foo b/foo
2 hunks, 2 lines changed
examine changes to 'foo'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,1 +1,2 @@
+A
B
record change 1/3 to 'foo'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,1 +2,2 @@
B
+C
record change 2/3 to 'foo'?
(enter ? for help) [Ynesfdaq?] n
diff --git a/garbage b/garbage
new file mode 100644
examine changes to 'garbage'?
(enter ? for help) [Ynesfdaq?] y
@@ -0,0 +1,1 @@
+
record change 3/3 to 'garbage'?
(enter ? for help) [Ynesfdaq?] y
$ hg st
M foo
? garbage
$ cat foo
A
B
$ hg shelve --patch
default (*s ago) changes to: add B to foo (glob)
diff --git a/foo b/foo
--- a/foo
+++ b/foo
@@ -1,2 +1,3 @@
A
B
+C
-- unshelve interactive on conflicts
$ echo A >> bar1
$ echo A >> bar2
$ hg add bar1 bar2
$ hg ci -m 'add A to bars'
$ echo B >> bar1
$ echo B >> bar2
$ hg shelve
shelved as default-01
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo C >> bar1
$ echo C >> bar2
$ hg ci -m 'add C to bars'
$ hg unshelve -i
unshelving change 'default-01'
rebasing shelved changes
merging bar1
merging bar2
warning: conflicts while merging bar1! (edit, then use 'hg resolve --mark')
warning: conflicts while merging bar2! (edit, then use 'hg resolve --mark')
unresolved conflicts (see 'hg resolve', then 'hg unshelve --continue')
[1]
$ cat > bar1 <<EOF
> A
> B
> C
> EOF
$ cat > bar2 <<EOF
> A
> B
> C
> EOF
$ hg resolve -m bar1 bar2
(no more unresolved files)
continue: hg unshelve --continue
-- using --continue with --interactive should throw an error
$ hg unshelve --continue -i
abort: cannot use both continue and interactive
[255]
$ cat bar1
A
B
C
#if stripbased
$ hg log -r 3:: -G
@ changeset: 5:f1d5f53e397b
| tag: tip
| parent: 3:e28fd7fa7938
| user: shelve@localhost
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: changes to: add A to bars
|
| @ changeset: 4:fe451a778c81
|/ user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: add C to bars
|
o changeset: 3:e28fd7fa7938
| user: test
~ date: Thu Jan 01 00:00:00 1970 +0000
summary: add A to bars
#endif
$ hg unshelve --continue <<EOF
> y
> y
> y
> n
> EOF
diff --git a/bar1 b/bar1
1 hunks, 1 lines changed
examine changes to 'bar1'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,2 +1,3 @@
A
+B
C
record change 1/2 to 'bar1'?
(enter ? for help) [Ynesfdaq?] y
diff --git a/bar2 b/bar2
1 hunks, 1 lines changed
examine changes to 'bar2'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,2 +1,3 @@
A
+B
C
record change 2/2 to 'bar2'?
(enter ? for help) [Ynesfdaq?] n
unshelve of 'default-01' complete
#if stripbased
$ hg log -r 3:: -G
@ changeset: 4:fe451a778c81
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: add C to bars
|
o changeset: 3:e28fd7fa7938
| user: test
~ date: Thu Jan 01 00:00:00 1970 +0000
summary: add A to bars
#endif
$ hg unshelve --continue
abort: no unshelve in progress
[255]
$ hg shelve --list
default-01 (*)* changes to: add A to bars (glob)
default (*)* changes to: add B to foo (glob)
$ hg unshelve -n default-01 -i <<EOF
> y
> y
> EOF
temporarily committing pending changes (restore with 'hg unshelve --abort')
rebasing shelved changes
diff --git a/bar2 b/bar2
1 hunks, 1 lines changed
examine changes to 'bar2'?
(enter ? for help) [Ynesfdaq?] y
@@ -1,2 +1,3 @@
A
+B
C
record this change to 'bar2'?
(enter ? for help) [Ynesfdaq?] y
-- test for --interactive --keep
$ hg unshelve -i --keep
abort: --keep on --interactive is not yet supported
[255]