repoview: make the conversion from node to rev explicit while computing hidden
You cannot use `repo[...]` lookup here. 1. It is slow 2. It is very likely to
trigger a hidden computation itself, entering an infinite loop.
" vim600: set foldmethod=marker:
"
" Vim plugin to assist in working with HG-controlled files.
"
" Last Change: 2006/02/22
" Version: 1.77
" Maintainer: Mathieu Clabaut <mathieu.clabaut@gmail.com>
" License: This file is placed in the public domain.
" Credits:
" Bob Hiestand <bob.hiestand@gmail.com> for the fabulous
" cvscommand.vim from which this script was directly created by
" means of sed commands and minor tweaks.
" Note:
" For Vim7 the use of Bob Hiestand's vcscommand.vim
" <http://www.vim.org/scripts/script.php?script_id=90>
" in conjunction with Vladmir Marek's Hg backend
" <http://www.vim.org/scripts/script.php?script_id=1898>
" is recommended.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"
" Section: Documentation
"----------------------------
"
" Documentation should be available by ":help hgcommand" command, once the
" script has been copied in you .vim/plugin directory.
"
" You still can read the documentation at the end of this file. Locate it by
" searching the "hgcommand-contents" string (and set ft=help to have
" appropriate syntactic coloration).
" Section: Plugin header {{{1
" loaded_hgcommand is set to 1 when the initialization begins, and 2 when it
" completes. This allows various actions to only be taken by functions after
" system initialization.
if exists("g:loaded_hgcommand")
finish
endif
let g:loaded_hgcommand = 1
" store 'compatible' settings
let s:save_cpo = &cpo
set cpo&vim
" run checks
let s:script_name = expand("<sfile>:t:r")
function! s:HGCleanupOnFailure(err)
echohl WarningMsg
echomsg s:script_name . ":" a:err "Plugin not loaded"
echohl None
let g:loaded_hgcommand = "no"
unlet s:save_cpo s:script_name
endfunction
if v:version < 602
call <SID>HGCleanupOnFailure("VIM 6.2 or later required.")
finish
endif
if !exists("*system")
call <SID>HGCleanupOnFailure("builtin system() function required.")
finish
endif
let s:script_version = "v0.2"
" Section: Event group setup {{{1
augroup HGCommand
augroup END
" Section: Plugin initialization {{{1
silent do HGCommand User HGPluginInit
" Section: Script variable initialization {{{1
let s:HGCommandEditFileRunning = 0
unlet! s:vimDiffRestoreCmd
unlet! s:vimDiffSourceBuffer
unlet! s:vimDiffBufferCount
unlet! s:vimDiffScratchList
" Section: Utility functions {{{1
" Function: s:HGResolveLink() {{{2
" Fully resolve the given file name to remove shortcuts or symbolic links.
function! s:HGResolveLink(fileName)
let resolved = resolve(a:fileName)
if resolved != a:fileName
let resolved = <SID>HGResolveLink(resolved)
endif
return resolved
endfunction
" Function: s:HGChangeToCurrentFileDir() {{{2
" Go to the directory in which the current HG-controlled file is located.
" If this is a HG command buffer, first switch to the original file.
function! s:HGChangeToCurrentFileDir(fileName)
let oldCwd=getcwd()
let fileName=<SID>HGResolveLink(a:fileName)
let newCwd=fnamemodify(fileName, ':h')
if strlen(newCwd) > 0
execute 'cd' escape(newCwd, ' ')
endif
return oldCwd
endfunction
" Function: <SID>HGGetOption(name, default) {{{2
" Grab a user-specified option to override the default provided. Options are
" searched in the window, buffer, then global spaces.
function! s:HGGetOption(name, default)
if exists("s:" . a:name . "Override")
execute "return s:".a:name."Override"
elseif exists("w:" . a:name)
execute "return w:".a:name
elseif exists("b:" . a:name)
execute "return b:".a:name
elseif exists("g:" . a:name)
execute "return g:".a:name
else
return a:default
endif
endfunction
" Function: s:HGEditFile(name, origBuffNR) {{{2
" Wrapper around the 'edit' command to provide some helpful error text if the
" current buffer can't be abandoned. If name is provided, it is used;
" otherwise, a nameless scratch buffer is used.
" Returns: 0 if successful, -1 if an error occurs.
function! s:HGEditFile(name, origBuffNR)
"Name parameter will be pasted into expression.
let name = escape(a:name, ' *?\')
let editCommand = <SID>HGGetOption('HGCommandEdit', 'edit')
if editCommand != 'edit'
if <SID>HGGetOption('HGCommandSplit', 'horizontal') == 'horizontal'
if name == ""
let editCommand = 'rightbelow new'
else
let editCommand = 'rightbelow split ' . name
endif
else
if name == ""
let editCommand = 'vert rightbelow new'
else
let editCommand = 'vert rightbelow split ' . name
endif
endif
else
if name == ""
let editCommand = 'enew'
else
let editCommand = 'edit ' . name
endif
endif
" Protect against useless buffer set-up
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning + 1
try
execute editCommand
finally
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning - 1
endtry
let b:HGOrigBuffNR=a:origBuffNR
let b:HGCommandEdit='split'
endfunction
" Function: s:HGCreateCommandBuffer(cmd, cmdName, statusText, filename) {{{2
" Creates a new scratch buffer and captures the output from execution of the
" given command. The name of the scratch buffer is returned.
function! s:HGCreateCommandBuffer(cmd, cmdName, statusText, origBuffNR)
let fileName=bufname(a:origBuffNR)
let resultBufferName=''
if <SID>HGGetOption("HGCommandNameResultBuffers", 0)
let nameMarker = <SID>HGGetOption("HGCommandNameMarker", '_')
if strlen(a:statusText) > 0
let bufName=a:cmdName . ' -- ' . a:statusText
else
let bufName=a:cmdName
endif
let bufName=fileName . ' ' . nameMarker . bufName . nameMarker
let counter=0
let resultBufferName = bufName
while buflisted(resultBufferName)
let counter=counter + 1
let resultBufferName=bufName . ' (' . counter . ')'
endwhile
endif
let hgCommand = <SID>HGGetOption("HGCommandHGExec", "hg") . " " . a:cmd
"echomsg "DBG :".hgCommand
let hgOut = system(hgCommand)
" HACK: diff command does not return proper error codes
if v:shell_error && a:cmdName != 'hgdiff'
if strlen(hgOut) == 0
echoerr "HG command failed"
else
echoerr "HG command failed: " . hgOut
endif
return -1
endif
if strlen(hgOut) == 0
" Handle case of no output. In this case, it is important to check the
" file status, especially since hg edit/unedit may change the attributes
" of the file with no visible output.
echomsg "No output from HG command"
checktime
return -1
endif
if <SID>HGEditFile(resultBufferName, a:origBuffNR) == -1
return -1
endif
set buftype=nofile
set noswapfile
set filetype=
if <SID>HGGetOption("HGCommandDeleteOnHide", 0)
set bufhidden=delete
endif
silent 0put=hgOut
" The last command left a blank line at the end of the buffer. If the
" last line is folded (a side effect of the 'put') then the attempt to
" remove the blank line will kill the last fold.
"
" This could be fixed by explicitly detecting whether the last line is
" within a fold, but I prefer to simply unfold the result buffer altogether.
if has("folding")
setlocal nofoldenable
endif
$d
1
" Define the environment and execute user-defined hooks.
let b:HGSourceFile=fileName
let b:HGCommand=a:cmdName
if a:statusText != ""
let b:HGStatusText=a:statusText
endif
silent do HGCommand User HGBufferCreated
return bufnr("%")
endfunction
" Function: s:HGBufferCheck(hgBuffer) {{{2
" Attempts to locate the original file to which HG operations were applied
" for a given buffer.
function! s:HGBufferCheck(hgBuffer)
let origBuffer = getbufvar(a:hgBuffer, "HGOrigBuffNR")
if origBuffer
if bufexists(origBuffer)
return origBuffer
else
" Original buffer no longer exists.
return -1
endif
else
" No original buffer
return a:hgBuffer
endif
endfunction
" Function: s:HGCurrentBufferCheck() {{{2
" Attempts to locate the original file to which HG operations were applied
" for the current buffer.
function! s:HGCurrentBufferCheck()
return <SID>HGBufferCheck(bufnr("%"))
endfunction
" Function: s:HGToggleDeleteOnHide() {{{2
" Toggles on and off the delete-on-hide behavior of HG buffers
function! s:HGToggleDeleteOnHide()
if exists("g:HGCommandDeleteOnHide")
unlet g:HGCommandDeleteOnHide
else
let g:HGCommandDeleteOnHide=1
endif
endfunction
" Function: s:HGDoCommand(hgcmd, cmdName, statusText) {{{2
" General skeleton for HG function execution.
" Returns: name of the new command buffer containing the command results
function! s:HGDoCommand(cmd, cmdName, statusText)
let hgBufferCheck=<SID>HGCurrentBufferCheck()
if hgBufferCheck == -1
echo "Original buffer no longer exists, aborting."
return -1
endif
let fileName=bufname(hgBufferCheck)
if isdirectory(fileName)
let fileName=fileName . "/" . getline(".")
endif
let realFileName = fnamemodify(<SID>HGResolveLink(fileName), ':t')
let oldCwd=<SID>HGChangeToCurrentFileDir(fileName)
try
" TODO
"if !filereadable('HG/Root')
"throw fileName . ' is not a HG-controlled file.'
"endif
let fullCmd = a:cmd . ' "' . realFileName . '"'
"echomsg "DEBUG".fullCmd
let resultBuffer=<SID>HGCreateCommandBuffer(fullCmd, a:cmdName, a:statusText, hgBufferCheck)
return resultBuffer
catch
echoerr v:exception
return -1
finally
execute 'cd' escape(oldCwd, ' ')
endtry
endfunction
" Function: s:HGGetStatusVars(revision, branch, repository) {{{2
"
" Obtains a HG revision number and branch name. The 'revisionVar',
" 'branchVar'and 'repositoryVar' arguments, if non-empty, contain the names of variables to hold
" the corresponding results.
"
" Returns: string to be exec'd that sets the multiple return values.
function! s:HGGetStatusVars(revisionVar, branchVar, repositoryVar)
let hgBufferCheck=<SID>HGCurrentBufferCheck()
"echomsg "DBG : in HGGetStatusVars"
if hgBufferCheck == -1
return ""
endif
let fileName=bufname(hgBufferCheck)
let fileNameWithoutLink=<SID>HGResolveLink(fileName)
let realFileName = fnamemodify(fileNameWithoutLink, ':t')
let oldCwd=<SID>HGChangeToCurrentFileDir(realFileName)
try
let hgCommand = <SID>HGGetOption("HGCommandHGExec", "hg") . " root "
let roottext=system(hgCommand)
" Suppress ending null char ! Does it work in window ?
let roottext=substitute(roottext,'^.*/\([^/\n\r]*\)\n\_.*$','\1','')
if match(getcwd()."/".fileNameWithoutLink, roottext) == -1
return ""
endif
let returnExpression = ""
if a:repositoryVar != ""
let returnExpression=returnExpression . " | let " . a:repositoryVar . "='" . roottext . "'"
endif
let hgCommand = <SID>HGGetOption("HGCommandHGExec", "hg") . " status -mardui " . realFileName
let statustext=system(hgCommand)
if(v:shell_error)
return ""
endif
if match(statustext, '^[?I]') >= 0
let revision="NEW"
elseif match(statustext, '^[R]') >= 0
let revision="REMOVED"
elseif match(statustext, '^[D]') >= 0
let revision="DELETED"
elseif match(statustext, '^[A]') >= 0
let revision="ADDED"
else
" The file is tracked, we can try to get is revision number
let hgCommand = <SID>HGGetOption("HGCommandHGExec", "hg") . " parents "
let statustext=system(hgCommand)
if(v:shell_error)
return ""
endif
let revision=substitute(statustext, '^changeset:\s*\(\d\+\):.*\_$\_.*$', '\1', "")
if a:branchVar != "" && match(statustext, '^\_.*\_^branch:') >= 0
let branch=substitute(statustext, '^\_.*\_^branch:\s*\(\S\+\)\n\_.*$', '\1', "")
let returnExpression=returnExpression . " | let " . a:branchVar . "='" . branch . "'"
endif
endif
if (exists('revision'))
let returnExpression = "let " . a:revisionVar . "='" . revision . "' " . returnExpression
endif
return returnExpression
finally
execute 'cd' escape(oldCwd, ' ')
endtry
endfunction
" Function: s:HGSetupBuffer() {{{2
" Attempts to set the b:HGBranch, b:HGRevision and b:HGRepository variables.
function! s:HGSetupBuffer(...)
if (exists("b:HGBufferSetup") && b:HGBufferSetup && !exists('a:1'))
" This buffer is already set up.
return
endif
if !<SID>HGGetOption("HGCommandEnableBufferSetup", 0)
\ || @% == ""
\ || s:HGCommandEditFileRunning > 0
\ || exists("b:HGOrigBuffNR")
unlet! b:HGRevision
unlet! b:HGBranch
unlet! b:HGRepository
return
endif
if !filereadable(expand("%"))
return -1
endif
let revision=""
let branch=""
let repository=""
exec <SID>HGGetStatusVars('revision', 'branch', 'repository')
"echomsg "DBG ".revision."#".branch."#".repository
if revision != ""
let b:HGRevision=revision
else
unlet! b:HGRevision
endif
if branch != ""
let b:HGBranch=branch
else
unlet! b:HGBranch
endif
if repository != ""
let b:HGRepository=repository
else
unlet! b:HGRepository
endif
silent do HGCommand User HGBufferSetup
let b:HGBufferSetup=1
endfunction
" Function: s:HGMarkOrigBufferForSetup(hgbuffer) {{{2
" Resets the buffer setup state of the original buffer for a given HG buffer.
" Returns: The HG buffer number in a passthrough mode.
function! s:HGMarkOrigBufferForSetup(hgBuffer)
checktime
if a:hgBuffer != -1
let origBuffer = <SID>HGBufferCheck(a:hgBuffer)
"This should never not work, but I'm paranoid
if origBuffer != a:hgBuffer
call setbufvar(origBuffer, "HGBufferSetup", 0)
endif
else
"We are presumably in the original buffer
let b:HGBufferSetup = 0
"We do the setup now as now event will be triggered allowing it later.
call <SID>HGSetupBuffer()
endif
return a:hgBuffer
endfunction
" Function: s:HGOverrideOption(option, [value]) {{{2
" Provides a temporary override for the given HG option. If no value is
" passed, the override is disabled.
function! s:HGOverrideOption(option, ...)
if a:0 == 0
unlet! s:{a:option}Override
else
let s:{a:option}Override = a:1
endif
endfunction
" Function: s:HGWipeoutCommandBuffers() {{{2
" Clears all current HG buffers of the specified type for a given source.
function! s:HGWipeoutCommandBuffers(originalBuffer, hgCommand)
let buffer = 1
while buffer <= bufnr('$')
if getbufvar(buffer, 'HGOrigBuffNR') == a:originalBuffer
if getbufvar(buffer, 'HGCommand') == a:hgCommand
execute 'bw' buffer
endif
endif
let buffer = buffer + 1
endwhile
endfunction
" Function: s:HGInstallDocumentation(full_name, revision) {{{2
" Install help documentation.
" Arguments:
" full_name: Full name of this vim plugin script, including path name.
" revision: Revision of the vim script. #version# mark in the document file
" will be replaced with this string with 'v' prefix.
" Return:
" 1 if new document installed, 0 otherwise.
" Note: Cleaned and generalized by guo-peng Wen
"'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
" Helper function to make mkdir as portable as possible
function! s:HGFlexiMkdir(dir)
if exists("*mkdir") " we can use Vim's own mkdir()
call mkdir(a:dir)
elseif !exists("+shellslash")
call system("mkdir -p '".a:dir."'")
else " M$
let l:ssl = &shellslash
try
set shellslash
" no single quotes?
call system('mkdir "'.a:dir.'"')
finally
let &shellslash = l:ssl
endtry
endif
endfunction
function! s:HGInstallDocumentation(full_name)
" Figure out document path based on full name of this script:
let l:vim_doc_path = fnamemodify(a:full_name, ":h:h") . "/doc"
if filewritable(l:vim_doc_path) != 2
echomsg s:script_name . ": Trying to update docs at" l:vim_doc_path
silent! call <SID>HGFlexiMkdir(l:vim_doc_path)
if filewritable(l:vim_doc_path) != 2
" Try first item in 'runtimepath':
let l:vim_doc_path =
\ substitute(&runtimepath, '^\([^,]*\).*', '\1/doc', 'e')
if filewritable(l:vim_doc_path) != 2
echomsg s:script_name . ": Trying to update docs at" l:vim_doc_path
silent! call <SID>HGFlexiMkdir(l:vim_doc_path)
if filewritable(l:vim_doc_path) != 2
" Put a warning:
echomsg "Unable to open documentation directory"
echomsg " type `:help add-local-help' for more information."
return 0
endif
endif
endif
endif
" Full name of documentation file:
let l:doc_file =
\ l:vim_doc_path . "/" . s:script_name . ".txt"
" Bail out if document file is still up to date:
if filereadable(l:doc_file) &&
\ getftime(a:full_name) < getftime(l:doc_file)
return 0
endif
" temporary global settings
let l:lz = &lazyredraw
let l:hls = &hlsearch
set lazyredraw nohlsearch
" Create a new buffer & read in the plugin file (me):
1 new
setlocal noswapfile modifiable nomodeline
if has("folding")
setlocal nofoldenable
endif
silent execute "read" escape(a:full_name, " ")
let l:doc_buf = bufnr("%")
1
" Delete from first line to a line starts with
" === START_DOC
silent 1,/^=\{3,}\s\+START_DOC\C/ delete _
" Delete from a line starts with
" === END_DOC
" to the end of the documents:
silent /^=\{3,}\s\+END_DOC\C/,$ delete _
" Add modeline for help doc: the modeline string is mangled intentionally
" to avoid it be recognized by VIM:
call append(line("$"), "")
call append(line("$"), " v" . "im:tw=78:ts=8:ft=help:norl:")
" Replace revision:
silent execute "normal :1s/#version#/" . s:script_version . "/\<CR>"
" Save the help document and wipe out buffer:
silent execute "wq!" escape(l:doc_file, " ") "| bw" l:doc_buf
" Build help tags:
silent execute "helptags" l:vim_doc_path
let &hlsearch = l:hls
let &lazyredraw = l:lz
return 1
endfunction
" Section: Public functions {{{1
" Function: HGGetRevision() {{{2
" Global function for retrieving the current buffer's HG revision number.
" Returns: Revision number or an empty string if an error occurs.
function! HGGetRevision()
let revision=""
exec <SID>HGGetStatusVars('revision', '', '')
return revision
endfunction
" Function: HGDisableBufferSetup() {{{2
" Global function for deactivating the buffer autovariables.
function! HGDisableBufferSetup()
let g:HGCommandEnableBufferSetup=0
silent! augroup! HGCommandPlugin
endfunction
" Function: HGEnableBufferSetup() {{{2
" Global function for activating the buffer autovariables.
function! HGEnableBufferSetup()
let g:HGCommandEnableBufferSetup=1
augroup HGCommandPlugin
au!
au BufEnter * call <SID>HGSetupBuffer()
au BufWritePost * call <SID>HGSetupBuffer()
" Force resetting up buffer on external file change (HG update)
au FileChangedShell * call <SID>HGSetupBuffer(1)
augroup END
" Only auto-load if the plugin is fully loaded. This gives other plugins a
" chance to run.
if g:loaded_hgcommand == 2
call <SID>HGSetupBuffer()
endif
endfunction
" Function: HGGetStatusLine() {{{2
" Default (sample) status line entry for HG files. This is only useful if
" HG-managed buffer mode is on (see the HGCommandEnableBufferSetup variable
" for how to do this).
function! HGGetStatusLine()
if exists('b:HGSourceFile')
" This is a result buffer
let value='[' . b:HGCommand . ' ' . b:HGSourceFile
if exists('b:HGStatusText')
let value=value . ' ' . b:HGStatusText
endif
let value = value . ']'
return value
endif
if exists('b:HGRevision')
\ && b:HGRevision != ''
\ && exists('b:HGRepository')
\ && b:HGRepository != ''
\ && exists('g:HGCommandEnableBufferSetup')
\ && g:HGCommandEnableBufferSetup
if !exists('b:HGBranch')
let l:branch=''
else
let l:branch=b:HGBranch
endif
return '[HG ' . b:HGRepository . '/' . l:branch .'/' . b:HGRevision . ']'
else
return ''
endif
endfunction
" Section: HG command functions {{{1
" Function: s:HGAdd() {{{2
function! s:HGAdd()
return <SID>HGMarkOrigBufferForSetup(<SID>HGDoCommand('add', 'hgadd', ''))
endfunction
" Function: s:HGAnnotate(...) {{{2
function! s:HGAnnotate(...)
if a:0 == 0
if &filetype == "HGAnnotate"
" This is a HGAnnotate buffer. Perform annotation of the version
" indicated by the current line.
let revision = substitute(getline("."),'\(^[0-9]*\):.*','\1','')
if <SID>HGGetOption('HGCommandAnnotateParent', 0) != 0 && revision > 0
let revision = revision - 1
endif
else
let revision=HGGetRevision()
if revision == ""
echoerr "Unable to obtain HG version information."
return -1
endif
endif
else
let revision=a:1
endif
if revision == "NEW"
echo "No annotatation available for new file."
return -1
endif
let resultBuffer=<SID>HGDoCommand('annotate -ndu -r ' . revision, 'hgannotate', revision)
"echomsg "DBG: ".resultBuffer
if resultBuffer != -1
set filetype=HGAnnotate
endif
return resultBuffer
endfunction
" Function: s:HGCommit() {{{2
function! s:HGCommit(...)
" Handle the commit message being specified. If a message is supplied, it
" is used; if bang is supplied, an empty message is used; otherwise, the
" user is provided a buffer from which to edit the commit message.
if a:2 != "" || a:1 == "!"
return <SID>HGMarkOrigBufferForSetup(<SID>HGDoCommand('commit -m "' . a:2 . '"', 'hgcommit', ''))
endif
let hgBufferCheck=<SID>HGCurrentBufferCheck()
if hgBufferCheck == -1
echo "Original buffer no longer exists, aborting."
return -1
endif
" Protect against windows' backslashes in paths. They confuse exec'd
" commands.
let shellSlashBak = &shellslash
try
set shellslash
let messageFileName = tempname()
let fileName=bufname(hgBufferCheck)
let realFilePath=<SID>HGResolveLink(fileName)
let newCwd=fnamemodify(realFilePath, ':h')
if strlen(newCwd) == 0
" Account for autochdir being in effect, which will make this blank, but
" we know we'll be in the current directory for the original file.
let newCwd = getcwd()
endif
let realFileName=fnamemodify(realFilePath, ':t')
if <SID>HGEditFile(messageFileName, hgBufferCheck) == -1
return
endif
" Protect against case and backslash issues in Windows.
let autoPattern = '\c' . messageFileName
" Ensure existence of group
augroup HGCommit
augroup END
execute 'au HGCommit BufDelete' autoPattern 'call delete("' . messageFileName . '")'
execute 'au HGCommit BufDelete' autoPattern 'au! HGCommit * ' autoPattern
" Create a commit mapping. The mapping must clear all autocommands in case
" it is invoked when HGCommandCommitOnWrite is active, as well as to not
" invoke the buffer deletion autocommand.
execute 'nnoremap <silent> <buffer> <Plug>HGCommit '.
\ ':au! HGCommit * ' . autoPattern . '<CR>'.
\ ':g/^HG:/d<CR>'.
\ ':update<CR>'.
\ ':call <SID>HGFinishCommit("' . messageFileName . '",' .
\ '"' . newCwd . '",' .
\ '"' . realFileName . '",' .
\ hgBufferCheck . ')<CR>'
silent 0put ='HG: ----------------------------------------------------------------------'
silent put =\"HG: Enter Log. Lines beginning with `HG:' are removed automatically\"
silent put ='HG: Type <leader>cc (or your own <Plug>HGCommit mapping)'
if <SID>HGGetOption('HGCommandCommitOnWrite', 1) == 1
execute 'au HGCommit BufWritePre' autoPattern 'g/^HG:/d'
execute 'au HGCommit BufWritePost' autoPattern 'call <SID>HGFinishCommit("' . messageFileName . '", "' . newCwd . '", "' . realFileName . '", ' . hgBufferCheck . ') | au! * ' autoPattern
silent put ='HG: or write this buffer'
endif
silent put ='HG: to finish this commit operation'
silent put ='HG: ----------------------------------------------------------------------'
$
let b:HGSourceFile=fileName
let b:HGCommand='HGCommit'
set filetype=hg
finally
let &shellslash = shellSlashBak
endtry
endfunction
" Function: s:HGDiff(...) {{{2
function! s:HGDiff(...)
if a:0 == 1
let revOptions = '-r' . a:1
let caption = a:1 . ' -> current'
elseif a:0 == 2
let revOptions = '-r' . a:1 . ' -r' . a:2
let caption = a:1 . ' -> ' . a:2
else
let revOptions = ''
let caption = ''
endif
let hgdiffopt=<SID>HGGetOption('HGCommandDiffOpt', 'w')
if hgdiffopt == ""
let diffoptionstring=""
else
let diffoptionstring=" -" . hgdiffopt . " "
endif
let resultBuffer = <SID>HGDoCommand('diff ' . diffoptionstring . revOptions , 'hgdiff', caption)
if resultBuffer != -1
set filetype=diff
endif
return resultBuffer
endfunction
" Function: s:HGGotoOriginal(["!]) {{{2
function! s:HGGotoOriginal(...)
let origBuffNR = <SID>HGCurrentBufferCheck()
if origBuffNR > 0
let origWinNR = bufwinnr(origBuffNR)
if origWinNR == -1
execute 'buffer' origBuffNR
else
execute origWinNR . 'wincmd w'
endif
if a:0 == 1
if a:1 == "!"
let buffnr = 1
let buffmaxnr = bufnr("$")
while buffnr <= buffmaxnr
if getbufvar(buffnr, "HGOrigBuffNR") == origBuffNR
execute "bw" buffnr
endif
let buffnr = buffnr + 1
endwhile
endif
endif
endif
endfunction
" Function: s:HGFinishCommit(messageFile, targetDir, targetFile) {{{2
function! s:HGFinishCommit(messageFile, targetDir, targetFile, origBuffNR)
if filereadable(a:messageFile)
let oldCwd=getcwd()
if strlen(a:targetDir) > 0
execute 'cd' escape(a:targetDir, ' ')
endif
let resultBuffer=<SID>HGCreateCommandBuffer('commit -l "' . a:messageFile . '" "'. a:targetFile . '"', 'hgcommit', '', a:origBuffNR)
execute 'cd' escape(oldCwd, ' ')
execute 'bw' escape(a:messageFile, ' *?\')
silent execute 'call delete("' . a:messageFile . '")'
return <SID>HGMarkOrigBufferForSetup(resultBuffer)
else
echoerr "Can't read message file; no commit is possible."
return -1
endif
endfunction
" Function: s:HGLog() {{{2
function! s:HGLog(...)
if a:0 == 0
let versionOption = ""
let caption = ''
else
let versionOption=" -r" . a:1
let caption = a:1
endif
let resultBuffer=<SID>HGDoCommand('log' . versionOption, 'hglog', caption)
if resultBuffer != ""
set filetype=rcslog
endif
return resultBuffer
endfunction
" Function: s:HGRevert() {{{2
function! s:HGRevert()
return <SID>HGMarkOrigBufferForSetup(<SID>HGDoCommand('revert', 'hgrevert', ''))
endfunction
" Function: s:HGReview(...) {{{2
function! s:HGReview(...)
if a:0 == 0
let versiontag=""
if <SID>HGGetOption('HGCommandInteractive', 0)
let versiontag=input('Revision: ')
endif
if versiontag == ""
let versiontag="(current)"
let versionOption=""
else
let versionOption=" -r " . versiontag . " "
endif
else
let versiontag=a:1
let versionOption=" -r " . versiontag . " "
endif
let resultBuffer = <SID>HGDoCommand('cat' . versionOption, 'hgreview', versiontag)
if resultBuffer > 0
let &filetype=getbufvar(b:HGOrigBuffNR, '&filetype')
endif
return resultBuffer
endfunction
" Function: s:HGStatus() {{{2
function! s:HGStatus()
return <SID>HGDoCommand('status', 'hgstatus', '')
endfunction
" Function: s:HGUpdate() {{{2
function! s:HGUpdate()
return <SID>HGMarkOrigBufferForSetup(<SID>HGDoCommand('update', 'update', ''))
endfunction
" Function: s:HGVimDiff(...) {{{2
function! s:HGVimDiff(...)
let originalBuffer = <SID>HGCurrentBufferCheck()
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning + 1
try
" If there's already a VimDiff'ed window, restore it.
" There may only be one HGVimDiff original window at a time.
if exists("s:vimDiffSourceBuffer") && s:vimDiffSourceBuffer != originalBuffer
" Clear the existing vimdiff setup by removing the result buffers.
call <SID>HGWipeoutCommandBuffers(s:vimDiffSourceBuffer, 'vimdiff')
endif
" Split and diff
if(a:0 == 2)
" Reset the vimdiff system, as 2 explicit versions were provided.
if exists('s:vimDiffSourceBuffer')
call <SID>HGWipeoutCommandBuffers(s:vimDiffSourceBuffer, 'vimdiff')
endif
let resultBuffer = <SID>HGReview(a:1)
if resultBuffer < 0
echomsg "Can't open HG revision " . a:1
return resultBuffer
endif
let b:HGCommand = 'vimdiff'
diffthis
let s:vimDiffBufferCount = 1
let s:vimDiffScratchList = '{'. resultBuffer . '}'
" If no split method is defined, cheat, and set it to vertical.
try
call <SID>HGOverrideOption('HGCommandSplit', <SID>HGGetOption('HGCommandDiffSplit', <SID>HGGetOption('HGCommandSplit', 'vertical')))
let resultBuffer=<SID>HGReview(a:2)
finally
call <SID>HGOverrideOption('HGCommandSplit')
endtry
if resultBuffer < 0
echomsg "Can't open HG revision " . a:1
return resultBuffer
endif
let b:HGCommand = 'vimdiff'
diffthis
let s:vimDiffBufferCount = 2
let s:vimDiffScratchList = s:vimDiffScratchList . '{'. resultBuffer . '}'
else
" Add new buffer
try
" Force splitting behavior, otherwise why use vimdiff?
call <SID>HGOverrideOption("HGCommandEdit", "split")
call <SID>HGOverrideOption("HGCommandSplit", <SID>HGGetOption('HGCommandDiffSplit', <SID>HGGetOption('HGCommandSplit', 'vertical')))
if(a:0 == 0)
let resultBuffer=<SID>HGReview()
else
let resultBuffer=<SID>HGReview(a:1)
endif
finally
call <SID>HGOverrideOption("HGCommandEdit")
call <SID>HGOverrideOption("HGCommandSplit")
endtry
if resultBuffer < 0
echomsg "Can't open current HG revision"
return resultBuffer
endif
let b:HGCommand = 'vimdiff'
diffthis
if !exists('s:vimDiffBufferCount')
" New instance of vimdiff.
let s:vimDiffBufferCount = 2
let s:vimDiffScratchList = '{' . resultBuffer . '}'
" This could have been invoked on a HG result buffer, not the
" original buffer.
wincmd W
execute 'buffer' originalBuffer
" Store info for later original buffer restore
let s:vimDiffRestoreCmd =
\ "call setbufvar(".originalBuffer.", \"&diff\", ".getbufvar(originalBuffer, '&diff').")"
\ . "|call setbufvar(".originalBuffer.", \"&foldcolumn\", ".getbufvar(originalBuffer, '&foldcolumn').")"
\ . "|call setbufvar(".originalBuffer.", \"&foldenable\", ".getbufvar(originalBuffer, '&foldenable').")"
\ . "|call setbufvar(".originalBuffer.", \"&foldmethod\", '".getbufvar(originalBuffer, '&foldmethod')."')"
\ . "|call setbufvar(".originalBuffer.", \"&scrollbind\", ".getbufvar(originalBuffer, '&scrollbind').")"
\ . "|call setbufvar(".originalBuffer.", \"&wrap\", ".getbufvar(originalBuffer, '&wrap').")"
\ . "|if &foldmethod=='manual'|execute 'normal! zE'|endif"
diffthis
wincmd w
else
" Adding a window to an existing vimdiff
let s:vimDiffBufferCount = s:vimDiffBufferCount + 1
let s:vimDiffScratchList = s:vimDiffScratchList . '{' . resultBuffer . '}'
endif
endif
let s:vimDiffSourceBuffer = originalBuffer
" Avoid executing the modeline in the current buffer after the autocommand.
let currentBuffer = bufnr('%')
let saveModeline = getbufvar(currentBuffer, '&modeline')
try
call setbufvar(currentBuffer, '&modeline', 0)
silent do HGCommand User HGVimDiffFinish
finally
call setbufvar(currentBuffer, '&modeline', saveModeline)
endtry
return resultBuffer
finally
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning - 1
endtry
endfunction
" Section: Command definitions {{{1
" Section: Primary commands {{{2
com! HGAdd call <SID>HGAdd()
com! -nargs=? HGAnnotate call <SID>HGAnnotate(<f-args>)
com! -bang -nargs=? HGCommit call <SID>HGCommit(<q-bang>, <q-args>)
com! -nargs=* HGDiff call <SID>HGDiff(<f-args>)
com! -bang HGGotoOriginal call <SID>HGGotoOriginal(<q-bang>)
com! -nargs=? HGLog call <SID>HGLog(<f-args>)
com! HGRevert call <SID>HGRevert()
com! -nargs=? HGReview call <SID>HGReview(<f-args>)
com! HGStatus call <SID>HGStatus()
com! HGUpdate call <SID>HGUpdate()
com! -nargs=* HGVimDiff call <SID>HGVimDiff(<f-args>)
" Section: HG buffer management commands {{{2
com! HGDisableBufferSetup call HGDisableBufferSetup()
com! HGEnableBufferSetup call HGEnableBufferSetup()
" Allow reloading hgcommand.vim
com! HGReload unlet! g:loaded_hgcommand | runtime plugin/hgcommand.vim
" Section: Plugin command mappings {{{1
nnoremap <silent> <Plug>HGAdd :HGAdd<CR>
nnoremap <silent> <Plug>HGAnnotate :HGAnnotate<CR>
nnoremap <silent> <Plug>HGCommit :HGCommit<CR>
nnoremap <silent> <Plug>HGDiff :HGDiff<CR>
nnoremap <silent> <Plug>HGGotoOriginal :HGGotoOriginal<CR>
nnoremap <silent> <Plug>HGClearAndGotoOriginal :HGGotoOriginal!<CR>
nnoremap <silent> <Plug>HGLog :HGLog<CR>
nnoremap <silent> <Plug>HGRevert :HGRevert<CR>
nnoremap <silent> <Plug>HGReview :HGReview<CR>
nnoremap <silent> <Plug>HGStatus :HGStatus<CR>
nnoremap <silent> <Plug>HGUpdate :HGUpdate<CR>
nnoremap <silent> <Plug>HGVimDiff :HGVimDiff<CR>
" Section: Default mappings {{{1
if !hasmapto('<Plug>HGAdd')
nmap <unique> <Leader>hga <Plug>HGAdd
endif
if !hasmapto('<Plug>HGAnnotate')
nmap <unique> <Leader>hgn <Plug>HGAnnotate
endif
if !hasmapto('<Plug>HGClearAndGotoOriginal')
nmap <unique> <Leader>hgG <Plug>HGClearAndGotoOriginal
endif
if !hasmapto('<Plug>HGCommit')
nmap <unique> <Leader>hgc <Plug>HGCommit
endif
if !hasmapto('<Plug>HGDiff')
nmap <unique> <Leader>hgd <Plug>HGDiff
endif
if !hasmapto('<Plug>HGGotoOriginal')
nmap <unique> <Leader>hgg <Plug>HGGotoOriginal
endif
if !hasmapto('<Plug>HGLog')
nmap <unique> <Leader>hgl <Plug>HGLog
endif
if !hasmapto('<Plug>HGRevert')
nmap <unique> <Leader>hgq <Plug>HGRevert
endif
if !hasmapto('<Plug>HGReview')
nmap <unique> <Leader>hgr <Plug>HGReview
endif
if !hasmapto('<Plug>HGStatus')
nmap <unique> <Leader>hgs <Plug>HGStatus
endif
if !hasmapto('<Plug>HGUpdate')
nmap <unique> <Leader>hgu <Plug>HGUpdate
endif
if !hasmapto('<Plug>HGVimDiff')
nmap <unique> <Leader>hgv <Plug>HGVimDiff
endif
" Section: Menu items {{{1
silent! aunmenu Plugin.HG
amenu <silent> &Plugin.HG.&Add <Plug>HGAdd
amenu <silent> &Plugin.HG.A&nnotate <Plug>HGAnnotate
amenu <silent> &Plugin.HG.&Commit <Plug>HGCommit
amenu <silent> &Plugin.HG.&Diff <Plug>HGDiff
amenu <silent> &Plugin.HG.&Log <Plug>HGLog
amenu <silent> &Plugin.HG.Revert <Plug>HGRevert
amenu <silent> &Plugin.HG.&Review <Plug>HGReview
amenu <silent> &Plugin.HG.&Status <Plug>HGStatus
amenu <silent> &Plugin.HG.&Update <Plug>HGUpdate
amenu <silent> &Plugin.HG.&VimDiff <Plug>HGVimDiff
" Section: Autocommands to restore vimdiff state {{{1
function! s:HGVimDiffRestore(vimDiffBuff)
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning + 1
try
if exists("s:vimDiffSourceBuffer")
if a:vimDiffBuff == s:vimDiffSourceBuffer
" Original file is being removed.
unlet! s:vimDiffSourceBuffer
unlet! s:vimDiffBufferCount
unlet! s:vimDiffRestoreCmd
unlet! s:vimDiffScratchList
elseif match(s:vimDiffScratchList, '{' . a:vimDiffBuff . '}') >= 0
let s:vimDiffScratchList = substitute(s:vimDiffScratchList, '{' . a:vimDiffBuff . '}', '', '')
let s:vimDiffBufferCount = s:vimDiffBufferCount - 1
if s:vimDiffBufferCount == 1 && exists('s:vimDiffRestoreCmd')
" All scratch buffers are gone, reset the original.
" Only restore if the source buffer is still in Diff mode
let sourceWinNR=bufwinnr(s:vimDiffSourceBuffer)
if sourceWinNR != -1
" The buffer is visible in at least one window
let currentWinNR = winnr()
while winbufnr(sourceWinNR) != -1
if winbufnr(sourceWinNR) == s:vimDiffSourceBuffer
execute sourceWinNR . 'wincmd w'
if getwinvar('', "&diff")
execute s:vimDiffRestoreCmd
endif
endif
let sourceWinNR = sourceWinNR + 1
endwhile
execute currentWinNR . 'wincmd w'
else
" The buffer is hidden. It must be visible in order to set the
" diff option.
let currentBufNR = bufnr('')
execute "hide buffer" s:vimDiffSourceBuffer
if getwinvar('', "&diff")
execute s:vimDiffRestoreCmd
endif
execute "hide buffer" currentBufNR
endif
unlet s:vimDiffRestoreCmd
unlet s:vimDiffSourceBuffer
unlet s:vimDiffBufferCount
unlet s:vimDiffScratchList
elseif s:vimDiffBufferCount == 0
" All buffers are gone.
unlet s:vimDiffSourceBuffer
unlet s:vimDiffBufferCount
unlet s:vimDiffScratchList
endif
endif
endif
finally
let s:HGCommandEditFileRunning = s:HGCommandEditFileRunning - 1
endtry
endfunction
augroup HGVimDiffRestore
au!
au BufUnload * call <SID>HGVimDiffRestore(expand("<abuf>"))
augroup END
" Section: Optional activation of buffer management {{{1
if s:HGGetOption('HGCommandEnableBufferSetup', 1)
call HGEnableBufferSetup()
endif
" Section: Doc installation {{{1
if <SID>HGInstallDocumentation(expand("<sfile>:p"))
echomsg s:script_name s:script_version . ": updated documentation"
endif
" Section: Plugin completion {{{1
" delete one-time vars and functions
delfunction <SID>HGInstallDocumentation
delfunction <SID>HGFlexiMkdir
delfunction <SID>HGCleanupOnFailure
unlet s:script_version s:script_name
let g:loaded_hgcommand=2
silent do HGCommand User HGPluginFinish
let &cpo = s:save_cpo
unlet s:save_cpo
" vim:se expandtab sts=2 sw=2:
finish
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Section: Documentation content {{{1
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
=== START_DOC
*hgcommand.txt* Mercurial vim integration #version#
HGCOMMAND REFERENCE MANUAL~
Author: Mathieu Clabaut <mathieu.clabaut@gmail.com>
Credits: Bob Hiestand <bob.hiestand@gmail.com>
Mercurial: http://mercurial.selenic.com/
Mercurial (noted Hg) is a fast, lightweight Source Control Management
system designed for efficient handling of very large distributed projects.
==============================================================================
1. Contents *hgcommand-contents*
Installation : |hgcommand-install|
HGCommand Intro : |hgcommand|
HGCommand Manual : |hgcommand-manual|
Customization : |hgcommand-customize|
Bugs : |hgcommand-bugs|
==============================================================================
2. HGCommand Installation *hgcommand-install*
In order to install the plugin, place the hgcommand.vim file into a plugin'
directory in your runtime path (please see |add-global-plugin| and
|'runtimepath'|.
HGCommand may be customized by setting variables, creating maps, and
specifying event handlers. Please see |hgcommand-customize| for more
details.
*hgcommand-auto-help*
The help file is automagically generated when the |hgcommand| script is
loaded for the first time.
==============================================================================
3. HGCommand Intro *hgcommand*
*hgcommand-intro*
The HGCommand plugin provides global ex commands for manipulating
HG-controlled source files. In general, each command operates on the
current buffer and accomplishes a separate hg function, such as update,
commit, log, and others (please see |hgcommand-commands| for a list of all
available commands). The results of each operation are displayed in a
scratch buffer. Several buffer variables are defined for those scratch
buffers (please see |hgcommand-buffer-variables|).
The notion of "current file" means either the current buffer, or, in the
case of a directory buffer, the file on the current line within the buffer.
For convenience, any HGCommand invoked on a HGCommand scratch buffer acts
as though it was invoked on the original file and splits the screen so that
the output appears in a new window.
Many of the commands accept revisions as arguments. By default, most
operate on the most recent revision on the current branch if no revision is
specified (though see |HGCommandInteractive| to prompt instead).
Each HGCommand is mapped to a key sequence starting with the <Leader>
keystroke. The default mappings may be overridden by supplying different
mappings before the plugin is loaded, such as in the vimrc, in the standard
fashion for plugin mappings. For examples, please see
|hgcommand-mappings-override|.
The HGCommand plugin may be configured in several ways. For more details,
please see |hgcommand-customize|.
==============================================================================
4. HGCommand Manual *hgcommand-manual*
4.1 HGCommand commands *hgcommand-commands*
HGCommand defines the following commands:
|:HGAdd|
|:HGAnnotate|
|:HGCommit|
|:HGDiff|
|:HGGotoOriginal|
|:HGLog|
|:HGRevert|
|:HGReview|
|:HGStatus|
|:HGUpdate|
|:HGVimDiff|
:HGAdd *:HGAdd*
This command performs "hg add" on the current file. Please note, this does
not commit the newly-added file.
:HGAnnotate *:HGAnnotate*
This command performs "hg annotate" on the current file. If an argument is
given, the argument is used as a revision number to display. If not given
an argument, it uses the most recent version of the file on the current
branch. Additionally, if the current buffer is a HGAnnotate buffer
already, the version number on the current line is used.
If the |HGCommandAnnotateParent| variable is set to a non-zero value, the
version previous to the one on the current line is used instead. This
allows one to navigate back to examine the previous version of a line.
The filetype of the HGCommand scratch buffer is set to 'HGAnnotate', to
take advantage of the bundled syntax file.
:HGCommit[!] *:HGCommit*
If called with arguments, this performs "hg commit" using the arguments as
the log message.
If '!' is used with no arguments, an empty log message is committed.
If called with no arguments, this is a two-step command. The first step
opens a buffer to accept a log message. When that buffer is written, it is
automatically closed and the file is committed using the information from
that log message. The commit can be abandoned if the log message buffer is
deleted or wiped before being written.
Alternatively, the mapping that is used to invoke :HGCommit (by default
<Leader>hgc) can be used in the log message buffer to immediately commit.
This is useful if the |HGCommandCommitOnWrite| variable is set to 0 to
disable the normal commit-on-write behavior.
:HGDiff *:HGDiff*
With no arguments, this performs "hg diff" on the current file against the
current repository version.
With one argument, "hg diff" is performed on the current file against the
specified revision.
With two arguments, hg diff is performed between the specified revisions of
the current file.
This command uses the 'HGCommandDiffOpt' variable to specify diff options.
If that variable does not exist, then 'wbBc' is assumed. If you wish to
have no options, then set it to the empty string.
:HGGotoOriginal *:HGGotoOriginal*
This command returns the current window to the source buffer, if the
current buffer is a HG command output buffer.
:HGGotoOriginal!
Like ":HGGotoOriginal" but also executes :bufwipeout on all HG command
output buffers for the source buffer.
:HGLog *:HGLog*
Performs "hg log" on the current file.
If an argument is given, it is passed as an argument to the "-r" option of
"hg log".
:HGRevert *:HGRevert*
Replaces the current file with the most recent version from the repository
in order to wipe out any undesired changes.
:HGReview *:HGReview*
Retrieves a particular version of the current file. If no argument is
given, the most recent version of the file on the current branch is
retrieved. Otherwise, the specified version is retrieved.
:HGStatus *:HGStatus*
Performs "hg status" on the current file.
:HGUpdate *:HGUpdate*
Performs "hg update" on the current file. This intentionally does not
automatically reload the current buffer, though vim should prompt the user
to do so if the underlying file is altered by this command.
:HGVimDiff *:HGVimDiff*
With no arguments, this prompts the user for a revision and then uses
vimdiff to display the differences between the current file and the
specified revision. If no revision is specified, the most recent version
of the file on the current branch is used.
With one argument, that argument is used as the revision as above. With
two arguments, the differences between the two revisions is displayed using
vimdiff.
With either zero or one argument, the original buffer is used to perform
the vimdiff. When the other buffer is closed, the original buffer will be
returned to normal mode.
Once vimdiff mode is started using the above methods, additional vimdiff
buffers may be added by passing a single version argument to the command.
There may be up to 4 vimdiff buffers total.
Using the 2-argument form of the command resets the vimdiff to only those 2
versions. Additionally, invoking the command on a different file will
close the previous vimdiff buffers.
4.2 Mappings *hgcommand-mappings*
By default, a mapping is defined for each command. These mappings execute
the default (no-argument) form of each command.
<Leader>hga HGAdd
<Leader>hgn HGAnnotate
<Leader>hgc HGCommit
<Leader>hgd HGDiff
<Leader>hgg HGGotoOriginal
<Leader>hgG HGGotoOriginal!
<Leader>hgl HGLog
<Leader>hgr HGReview
<Leader>hgs HGStatus
<Leader>hgu HGUpdate
<Leader>hgv HGVimDiff
*hgcommand-mappings-override*
The default mappings can be overridden by user-provided instead by mapping
to <Plug>CommandName. This is especially useful when these mappings
collide with other existing mappings (vim will warn of this during plugin
initialization, but will not clobber the existing mappings).
For instance, to override the default mapping for :HGAdd to set it to
'\add', add the following to the vimrc: >
nmap \add <Plug>HGAdd
<
4.3 Automatic buffer variables *hgcommand-buffer-variables*
Several buffer variables are defined in each HGCommand result buffer.
These may be useful for additional customization in callbacks defined in
the event handlers (please see |hgcommand-events|).
The following variables are automatically defined:
b:hgOrigBuffNR *b:hgOrigBuffNR*
This variable is set to the buffer number of the source file.
b:hgcmd *b:hgcmd*
This variable is set to the name of the hg command that created the result
buffer.
==============================================================================
5. Configuration and customization *hgcommand-customize*
*hgcommand-config*
The HGCommand plugin can be configured in two ways: by setting
configuration variables (see |hgcommand-options|) or by defining HGCommand
event handlers (see |hgcommand-events|). Additionally, the HGCommand
plugin provides several option for naming the HG result buffers (see
|hgcommand-naming|) and supported a customized status line (see
|hgcommand-statusline| and |hgcommand-buffer-management|).
5.1 HGCommand configuration variables *hgcommand-options*
Several variables affect the plugin's behavior. These variables are
checked at time of execution, and may be defined at the window, buffer, or
global level and are checked in that order of precedence.
The following variables are available:
|HGCommandAnnotateParent|
|HGCommandCommitOnWrite|
|HGCommandHGExec|
|HGCommandDeleteOnHide|
|HGCommandDiffOpt|
|HGCommandDiffSplit|
|HGCommandEdit|
|HGCommandEnableBufferSetup|
|HGCommandInteractive|
|HGCommandNameMarker|
|HGCommandNameResultBuffers|
|HGCommandSplit|
HGCommandAnnotateParent *HGCommandAnnotateParent*
This variable, if set to a non-zero value, causes the zero-argument form of
HGAnnotate when invoked on a HGAnnotate buffer to go to the version
previous to that displayed on the current line. If not set, it defaults to
0.
HGCommandCommitOnWrite *HGCommandCommitOnWrite*
This variable, if set to a non-zero value, causes the pending hg commit to
take place immediately as soon as the log message buffer is written. If
set to zero, only the HGCommit mapping will cause the pending commit to
occur. If not set, it defaults to 1.
HGCommandHGExec *HGCommandHGExec*
This variable controls the executable used for all HG commands. If not
set, it defaults to "hg".
HGCommandDeleteOnHide *HGCommandDeleteOnHide*
This variable, if set to a non-zero value, causes the temporary HG result
buffers to automatically delete themselves when hidden.
HGCommandDiffOpt *HGCommandDiffOpt*
This variable, if set, determines the options passed to the diff command of
HG. If not set, it defaults to 'w'.
HGCommandDiffSplit *HGCommandDiffSplit*
This variable overrides the |HGCommandSplit| variable, but only for buffers
created with |:HGVimDiff|.
HGCommandEdit *HGCommandEdit*
This variable controls whether the original buffer is replaced ('edit') or
split ('split'). If not set, it defaults to 'edit'.
HGCommandEnableBufferSetup *HGCommandEnableBufferSetup*
This variable, if set to a non-zero value, activates HG buffer management
mode see (|hgcommand-buffer-management|). This mode means that three
buffer variables, 'HGRepository', 'HGRevision' and 'HGBranch', are set if
the file is HG-controlled. This is useful for displaying version
information in the status bar.
HGCommandInteractive *HGCommandInteractive*
This variable, if set to a non-zero value, causes appropriate commands (for
the moment, only |:HGReview|) to query the user for a revision to use
instead of the current revision if none is specified.
HGCommandNameMarker *HGCommandNameMarker*
This variable, if set, configures the special attention-getting characters
that appear on either side of the hg buffer type in the buffer name. This
has no effect unless |HGCommandNameResultBuffers| is set to a true value.
If not set, it defaults to '_'.
HGCommandNameResultBuffers *HGCommandNameResultBuffers*
This variable, if set to a true value, causes the hg result buffers to be
named in the old way ('<source file name> _<hg command>_'). If not set or
set to a false value, the result buffer is nameless.
HGCommandSplit *HGCommandSplit*
This variable controls the orientation of the various window splits that
may occur (such as with HGVimDiff, when using a HG command on a HG command
buffer, or when the |HGCommandEdit| variable is set to 'split'. If set to
'horizontal', the resulting windows will be on stacked on top of one
another. If set to 'vertical', the resulting windows will be side-by-side.
If not set, it defaults to 'horizontal' for all but HGVimDiff windows.
5.2 HGCommand events *hgcommand-events*
For additional customization, HGCommand can trigger user-defined events.
Event handlers are provided by defining User event autocommands (see
|autocommand|, |User|) in the HGCommand group with patterns matching the
event name.
For instance, the following could be added to the vimrc to provide a 'q'
mapping to quit a HGCommand scratch buffer: >
augroup HGCommand
au HGCommand User HGBufferCreated silent! nmap <unique> <buffer> q:
bwipeout<cr>
augroup END
<
The following hooks are available:
HGBufferCreated This event is fired just after a hg command result
buffer is created and filled with the result of a hg
command. It is executed within the context of the HG
command buffer. The HGCommand buffer variables may be
useful for handlers of this event (please see
|hgcommand-buffer-variables|).
HGBufferSetup This event is fired just after HG buffer setup occurs,
if enabled.
HGPluginInit This event is fired when the HGCommand plugin first
loads.
HGPluginFinish This event is fired just after the HGCommand plugin
loads.
HGVimDiffFinish This event is fired just after the HGVimDiff command
executes to allow customization of, for instance,
window placement and focus.
5.3 HGCommand buffer naming *hgcommand-naming*
By default, the buffers containing the result of HG commands are nameless
scratch buffers. It is intended that buffer variables of those buffers be
used to customize the statusline option so that the user may fully control
the display of result buffers.
If the old-style naming is desired, please enable the
|HGCommandNameResultBuffers| variable. Then, each result buffer will
receive a unique name that includes the source file name, the HG command,
and any extra data (such as revision numbers) that were part of the
command.
5.4 HGCommand status line support *hgcommand-statusline*
It is intended that the user will customize the |'statusline'| option to
include HG result buffer attributes. A sample function that may be used in
the |'statusline'| option is provided by the plugin, HGGetStatusLine(). In
order to use that function in the status line, do something like the
following: >
set statusline=%<%f\ %{HGGetStatusLine()}\ %h%m%r%=%l,%c%V\ %P
<
of which %{HGGetStatusLine()} is the relevant portion.
The sample HGGetStatusLine() function handles both HG result buffers and
HG-managed files if HGCommand buffer management is enabled (please see
|hgcommand-buffer-management|).
5.5 HGCommand buffer management *hgcommand-buffer-management*
The HGCommand plugin can operate in buffer management mode, which means
that it attempts to set two buffer variables ('HGRevision' and 'HGBranch')
upon entry into a buffer. This is rather slow because it means that 'hg
status' will be invoked at each entry into a buffer (during the |BufEnter|
autocommand).
This mode is enabled by default. In order to disable it, set the
|HGCommandEnableBufferSetup| variable to a false (zero) value. Enabling
this mode simply provides the buffer variables mentioned above. The user
must explicitly include those in the |'statusline'| option if they are to
appear in the status line (but see |hgcommand-statusline| for a simple way
to do that).
==============================================================================
9. Tips *hgcommand-tips*
9.1 Split window annotation, by Michael Anderson >
:nmap <Leader>hgN :vs<CR><C-w>h<Leader>hgn:vertical res 40<CR>
\ggdddd:set scb<CR>:set nowrap<CR><C-w>lgg:set scb<CR>
\:set nowrap<CR>
<
This splits the buffer vertically, puts an annotation on the left (minus
the header) with the width set to 40. An editable/normal copy is placed on
the right. The two versions are scroll locked so they move as one. and
wrapping is turned off so that the lines line up correctly. The advantages
are...
1) You get a versioning on the right.
2) You can still edit your own code.
3) Your own code still has syntax highlighting.
==============================================================================
8. Known bugs *hgcommand-bugs*
Please let me know if you run across any.
HGVimDiff, when using the original (real) source buffer as one of the diff
buffers, uses some hacks to try to restore the state of the original buffer
when the scratch buffer containing the other version is destroyed. There
may still be bugs in here, depending on many configuration details.
==============================================================================
9. TODO *hgcommand-todo*
Integrate symlink tracking once HG will support them.
==============================================================================
=== END_DOC
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" v im:tw=78:ts=8:ft=help:norl:
" vim600: set foldmethod=marker tabstop=8 shiftwidth=2 softtabstop=2 smartindent smarttab :
"fileencoding=iso-8859-15