view doc/check-seclevel.py @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests

This is fixing quadratic behavior, which is probably not noticeable in the
common case, but if a very large directory gets added here, it can get pretty
bad. This was noticed because we had some pushes that spent >25s in changegroup
generation calling min() here, according to profiling.

The original reasoning for min() being used in 829d369fc5a8 was that, at that
point in the series, we were adding almost everything to tmfnodes during the
first iteration through the loop , so we needed to avoid sending child
directories before parents. Later changes made it so that the child directories
were added only when we visited the parent directory (not all of them on the
first iteration), so this is no longer necessary - there won't be any child
directories in tmfnodes before the parents have been sent.

This does mean that the manifests are now exchanged unordered, whereas
previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b,
and e in any order; b/c must still follow b, and b/c/d must still follow b/c.

Differential Revision: https://phab.mercurial-scm.org/D1351

#!/usr/bin/env python
#
# checkseclevel - checking section title levels in each online help document

from __future__ import absolute_import

import optparse
import os
import sys

# import from the live mercurial repo
os.environ['HGMODULEPOLICY'] = 'py'
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
from mercurial import (
    commands,
    extensions,
    help,
    minirst,
    ui as uimod,
)

table = commands.table
helptable = help.helptable

level2mark = [b'"', b'=', b'-', b'.', b'#']
reservedmarks = [b'"']

mark2level = {}
for m, l in zip(level2mark, range(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3

def showavailables(ui, initlevel):
    avail = ('    available marks and order of them in this help: %s\n') % (
        ', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1:]]))
    ui.warn(avail.encode('utf-8'))

def checkseclevel(ui, doc, name, initlevel):
    ui.note(('checking "%s"\n') % name)
    if not isinstance(doc, bytes):
        doc = doc.encode('utf-8')
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block[b'type'] != b'section':
            continue
        mark = block[b'underline']
        title = block[b'lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            ui.warn((('invalid section mark %r for "%s" of %s\n') %
                     (mark * 4, title, name)).encode('utf-8'))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            ui.warn(('gap of section level at "%s" of %s\n') %
                    (title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        ui.note(('appropriate section level for "%s %s"\n') %
                (mark * (nextlevel * 2), title))
        curlevel = nextlevel

    return errorcnt

def checkcmdtable(ui, cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split(b"|")[0].lstrip(b"^")
        if not entry[0].__doc__:
            ui.note(('skip checking %s: no help document\n') %
                    (namefmt % name))
            continue
        errorcnt += checkseclevel(ui, entry[0].__doc__,
                                  namefmt % name,
                                  initlevel)
    return errorcnt

def checkhghelps(ui):
    errorcnt = 0
    for names, sec, doc in helptable:
        if callable(doc):
            doc = doc(ui)
        errorcnt += checkseclevel(ui, doc,
                                  '%s help topic' % names[0],
                                  initlevel_topic)

    errorcnt += checkcmdtable(ui, table, '%s command', initlevel_cmd)

    for name in sorted(list(extensions.enabled()) +
                       list(extensions.disabled())):
        mod = extensions.load(ui, name, None)
        if not mod.__doc__:
            ui.note(('skip checking %s extension: no help document\n') % name)
            continue
        errorcnt += checkseclevel(ui, mod.__doc__,
                                  '%s extension' % name,
                                  initlevel_ext)

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(ui, cmdtable,
                                      '%%s command of %s extension' % name,
                                      initlevel_ext_cmd)
    return errorcnt

def checkfile(ui, filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        with open(filename) as fp:
            doc = fp.read()

    ui.note(('checking input from %s with initlevel %d\n') %
            (filename, initlevel))
    return checkseclevel(ui, doc, 'input from %s' % filename, initlevel)

def main():
    optparser = optparse.OptionParser("""%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
""")
    optparser.add_option("-v", "--verbose",
                         help="enable additional output",
                         action="store_true")
    optparser.add_option("-d", "--debug",
                         help="debug mode",
                         action="store_true")
    optparser.add_option("-f", "--file",
                         help="filename to read in (or '-' for stdin)",
                         action="store", default="")

    optparser.add_option("-t", "--topic",
                         help="parse file as help topic",
                         action="store_const", dest="initlevel", const=0)
    optparser.add_option("-c", "--command",
                         help="parse file as help of core command",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-e", "--extension",
                         help="parse file as help of extension",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-C", "--extension-command",
                         help="parse file as help of extension command",
                         action="store_const", dest="initlevel", const=3)

    optparser.add_option("-l", "--initlevel",
                         help="set initial section level manually",
                         action="store", type="int", default=0)

    (options, args) = optparser.parse_args()

    ui = uimod.ui.load()
    ui.setconfig('ui', 'verbose', options.verbose, '--verbose')
    ui.setconfig('ui', 'debug', options.debug, '--debug')

    if options.file:
        if checkfile(ui, options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps(ui):
            sys.exit(1)

if __name__ == "__main__":
    main()