view tests/test-export.t @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests

This is fixing quadratic behavior, which is probably not noticeable in the
common case, but if a very large directory gets added here, it can get pretty
bad. This was noticed because we had some pushes that spent >25s in changegroup
generation calling min() here, according to profiling.

The original reasoning for min() being used in 829d369fc5a8 was that, at that
point in the series, we were adding almost everything to tmfnodes during the
first iteration through the loop , so we needed to avoid sending child
directories before parents. Later changes made it so that the child directories
were added only when we visited the parent directory (not all of them on the
first iteration), so this is no longer necessary - there won't be any child
directories in tmfnodes before the parents have been sent.

This does mean that the manifests are now exchanged unordered, whereas
previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b,
and e in any order; b/c must still follow b, and b/c/d must still follow b/c.

Differential Revision: https://phab.mercurial-scm.org/D1351

  $ hg init repo
  $ cd repo
  $ touch foo
  $ hg add foo
  $ for i in 0 1 2 3 4 5 6 7 8 9 10 11; do
  >    echo "foo-$i" >> foo
  >    hg ci -m "foo-$i"
  > done

  $ for out in "%nof%N" "%%%H" "%b-%R" "%h" "%r" "%m"; do
  >    echo
  >    echo "# foo-$out.patch"
  >    hg export -v -o "foo-$out.patch" 2:tip
  > done
  
  # foo-%nof%N.patch
  exporting patches:
  foo-01of10.patch
  foo-02of10.patch
  foo-03of10.patch
  foo-04of10.patch
  foo-05of10.patch
  foo-06of10.patch
  foo-07of10.patch
  foo-08of10.patch
  foo-09of10.patch
  foo-10of10.patch
  
  # foo-%%%H.patch
  exporting patches:
  foo-%617188a1c80f869a7b66c85134da88a6fb145f67.patch
  foo-%dd41a5ff707a5225204105611ba49cc5c229d55f.patch
  foo-%f95a5410f8664b6e1490a4af654e4b7d41a7b321.patch
  foo-%4346bcfde53b4d9042489078bcfa9c3e28201db2.patch
  foo-%afda8c3a009cc99449a05ad8aa4655648c4ecd34.patch
  foo-%35284ce2b6b99c9d2ac66268fe99e68e1974e1aa.patch
  foo-%9688c41894e6931305fa7165a37f6568050b4e9b.patch
  foo-%747d3c68f8ec44bb35816bfcd59aeb50b9654c2f.patch
  foo-%5f17a83f5fbd9414006a5e563eab4c8a00729efd.patch
  foo-%f3acbafac161ec68f1598af38f794f28847ca5d3.patch
  
  # foo-%b-%R.patch
  exporting patches:
  foo-repo-2.patch
  foo-repo-3.patch
  foo-repo-4.patch
  foo-repo-5.patch
  foo-repo-6.patch
  foo-repo-7.patch
  foo-repo-8.patch
  foo-repo-9.patch
  foo-repo-10.patch
  foo-repo-11.patch
  
  # foo-%h.patch
  exporting patches:
  foo-617188a1c80f.patch
  foo-dd41a5ff707a.patch
  foo-f95a5410f866.patch
  foo-4346bcfde53b.patch
  foo-afda8c3a009c.patch
  foo-35284ce2b6b9.patch
  foo-9688c41894e6.patch
  foo-747d3c68f8ec.patch
  foo-5f17a83f5fbd.patch
  foo-f3acbafac161.patch
  
  # foo-%r.patch
  exporting patches:
  foo-02.patch
  foo-03.patch
  foo-04.patch
  foo-05.patch
  foo-06.patch
  foo-07.patch
  foo-08.patch
  foo-09.patch
  foo-10.patch
  foo-11.patch
  
  # foo-%m.patch
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  foo-foo_4.patch
  foo-foo_5.patch
  foo-foo_6.patch
  foo-foo_7.patch
  foo-foo_8.patch
  foo-foo_9.patch
  foo-foo_10.patch
  foo-foo_11.patch

Doing it again clobbers the files rather than appending:
  $ hg export -v -o "foo-%m.patch" 2:3
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  $ grep HG foo-foo_2.patch | wc -l
  \s*1 (re)
  $ grep HG foo-foo_3.patch | wc -l
  \s*1 (re)

Exporting 4 changesets to a file:

  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Doing it again clobbers the file rather than appending:
  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Exporting 4 changesets to stdout:

  $ hg export 1 2 3 4 | grep HG | wc -l
  \s*4 (re)

Exporting revision -2 to a file:

  $ hg export -- -2
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 5f17a83f5fbd9414006a5e563eab4c8a00729efd
  # Parent  747d3c68f8ec44bb35816bfcd59aeb50b9654c2f
  foo-10
  
  diff -r 747d3c68f8ec -r 5f17a83f5fbd foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -8,3 +8,4 @@
   foo-7
   foo-8
   foo-9
  +foo-10

Exporting wdir revision:

  $ echo "foo-wdir" >> foo
  $ hg export 'wdir()'
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID ffffffffffffffffffffffffffffffffffffffff
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
  
  
  diff -r f3acbafac161 foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +foo-wdir
  $ hg revert -q foo

No filename should be printed if stdout is specified explicitly:

  $ hg export -v 1 -o -
  exporting patch:
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID d1c9656e973cfb5aebd5499bbd2cb350e3b12266
  # Parent  871558de6af2e8c244222f8eea69b782c94ce3df
  foo-1
  
  diff -r 871558de6af2 -r d1c9656e973c foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,2 @@
   foo-0
  +foo-1

Checking if only alphanumeric characters are used in the file name (%m option):

  $ echo "line" >> foo
  $ hg commit -m " !\"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]"'^'"_\`abcdefghijklmnopqrstuvwxyz{|}~"
  $ hg export -v -o %m.patch tip
  exporting patch:
  ____________0123456789_______ABCDEFGHIJKLMNOPQRSTUVWXYZ______abcdefghijklmnopqrstuvwxyz____.patch

Catch exporting unknown revisions (especially empty revsets, see issue3353)

  $ hg export
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 197ecd81a57f760b54f34a58817ad5b04991fa47
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  diff -r f3acbafac161 -r 197ecd81a57f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +line

  $ hg export ""
  hg: parse error: empty query
  [255]
  $ hg export 999
  abort: unknown revision '999'!
  [255]
  $ hg export "not all()"
  abort: export requires at least one changeset
  [255]

Check for color output
  $ cat <<EOF >> $HGRCPATH
  > [color]
  > mode = ansi
  > [extensions]
  > color =
  > EOF

  $ hg export --color always --nodates tip
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID * (glob)
  # Parent * (glob)
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  \x1b[0;1mdiff -r f3acbafac161 -r 197ecd81a57f foo\x1b[0m (esc)
  \x1b[0;31;1m--- a/foo\x1b[0m (esc)
  \x1b[0;32;1m+++ b/foo\x1b[0m (esc)
  \x1b[0;35m@@ -10,3 +10,4 @@\x1b[0m (esc)
   foo-9
   foo-10
   foo-11
  \x1b[0;32m+line\x1b[0m (esc)


  $ cd ..