view tests/test-pager-legacy.t @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests This is fixing quadratic behavior, which is probably not noticeable in the common case, but if a very large directory gets added here, it can get pretty bad. This was noticed because we had some pushes that spent >25s in changegroup generation calling min() here, according to profiling. The original reasoning for min() being used in 829d369fc5a8 was that, at that point in the series, we were adding almost everything to tmfnodes during the first iteration through the loop , so we needed to avoid sending child directories before parents. Later changes made it so that the child directories were added only when we visited the parent directory (not all of them on the first iteration), so this is no longer necessary - there won't be any child directories in tmfnodes before the parents have been sent. This does mean that the manifests are now exchanged unordered, whereas previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b, and e in any order; b/c must still follow b, and b/c/d must still follow b/c. Differential Revision: https://phab.mercurial-scm.org/D1351
author Kyle Lippincott <spectral@google.com>
date Wed, 08 Nov 2017 18:24:43 -0800
parents 274811627808
children e53879421ecd
line wrap: on
line source

  $ cat >> fakepager.py <<EOF
  > import sys
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > color = no
  > [extensions]
  > pager=
  > [pager]
  > pager = $PYTHON $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `$PYTHON $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but summary is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg summary
  parent: 10:46106edeeb38 tip
   modify a 10
  branch: default
  commit: (clean)
  update: (current)
  phases: 11 draft

We can enable the pager on summary:

  $ hg --config pager.attend-summary=yes summary
  paged! 'parent: 10:46106edeeb38 tip\n'
  paged! ' modify a 10\n'
  paged! 'branch: default\n'
  paged! 'commit: (clean)\n'
  paged! 'update: (current)\n'
  paged! 'phases: 11 draft\n'

  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

If we completely change the attend list that's respected:
  $ hg --config pager.attend=summary diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

If 'log' is in attend, then 'history' should also be paged:
  $ hg history --limit 2 --config pager.attend=log
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: history is explicitly ignored in pager config, but
because log is in the attend list it still gets pager treatment.

  $ hg history --limit 2 --config pager.attend=log \
  >   --config pager.ignore=history
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: history is explicitly marked as attend-history=no, but
it doesn't fail to get paged because log is still in the attend list.

  $ hg history --limit 2 --config pager.attend-history=no
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Possible bug: disabling pager for log but enabling it for history
doesn't result in history being paged.

  $ hg history --limit 2 --config pager.attend-log=no \
  > --config pager.attend-history=yes
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  changeset:   9:6dd8ea7dd621
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > color = always
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
  $ hg --config pager.attend-echoa=yes echoa
  paged! 'a\n'

Pager attributes should be copied to mq repo. Otherwise pager would be started
twice and color mode would be lost.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > mq =
  > EOF
  $ hg init --mq
  $ hg qnew foo.patch
  $ hg qpop
  popping foo.patch
  patch queue now empty
  $ hg ci --mq -m 'commit patches'
  $ hg log --mq --debug
  starting pager for command 'extension-via-attend-log'
  paged! '\x1b[0;33mchangeset:   0:6cc2ded15503e368aaf76b6cc3d12f320c9e3b87\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'phase:       draft\n'
  paged! 'parent:      -1:0000000000000000000000000000000000000000\n'
  paged! 'parent:      -1:0000000000000000000000000000000000000000\n'
  paged! 'manifest:    0:4980de1ae1b612014d5bcfa9507da84ce8891daa\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'files+:      .hgignore foo.patch series\n'
  paged! 'extra:       branch=default\n'
  paged! 'description:\n'
  paged! 'commit patches\n'
  paged! '\n'
  paged! '\n'

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import registrar, commands
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'fortytwo', [], 'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write('42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]