view tests/test-progress.t @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests

This is fixing quadratic behavior, which is probably not noticeable in the
common case, but if a very large directory gets added here, it can get pretty
bad. This was noticed because we had some pushes that spent >25s in changegroup
generation calling min() here, according to profiling.

The original reasoning for min() being used in 829d369fc5a8 was that, at that
point in the series, we were adding almost everything to tmfnodes during the
first iteration through the loop , so we needed to avoid sending child
directories before parents. Later changes made it so that the child directories
were added only when we visited the parent directory (not all of them on the
first iteration), so this is no longer necessary - there won't be any child
directories in tmfnodes before the parents have been sent.

This does mean that the manifests are now exchanged unordered, whereas
previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b,
and e in any order; b/c must still follow b, and b/c/d must still follow b/c.

Differential Revision: https://phab.mercurial-scm.org/D1351

  $ cat > loop.py <<EOF
  > from __future__ import absolute_import
  > import time
  > from mercurial import commands, registrar
  > 
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > 
  > class incrementingtime(object):
  >     def __init__(self):
  >         self._time = 0.0
  >     def __call__(self):
  >         self._time += 0.25
  >         return self._time
  > time.time = incrementingtime()
  > 
  > @command(b'loop',
  >     [('', 'total', '', 'override for total'),
  >     ('', 'nested', False, 'show nested results'),
  >     ('', 'parallel', False, 'show parallel sets of results')],
  >     'hg loop LOOPS',
  >     norepo=True)
  > def loop(ui, loops, **opts):
  >     loops = int(loops)
  >     total = None
  >     if loops >= 0:
  >         total = loops
  >     if opts.get('total', None):
  >         total = int(opts.get('total'))
  >     nested = False
  >     if opts.get('nested', None):
  >         nested = True
  >     loops = abs(loops)
  > 
  >     for i in range(loops):
  >         ui.progress(topiclabel, i, getloopitem(i), 'loopnum', total)
  >         if opts.get('parallel'):
  >             ui.progress('other', i, 'other.%d' % i, 'othernum', total)
  >         if nested:
  >             nested_steps = 2
  >             if i and i % 4 == 0:
  >                 nested_steps = 5
  >             for j in range(nested_steps):
  >                 ui.progress(
  >                   'nested', j, 'nested.%d' % j, 'nestnum', nested_steps)
  >             ui.progress(
  >               'nested', None, 'nested.done', 'nestnum', nested_steps)
  >     ui.progress(topiclabel, None, 'loop.done', 'loopnum', total)
  > 
  > topiclabel = 'loop'
  > def getloopitem(i):
  >     return 'loop.%d' % i
  > 
  > EOF

  $ cp $HGRCPATH $HGRCPATH.orig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "format = topic bar number" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

test default params, display nothing because of delay

  $ hg -y loop 3
  $ echo "delay=0" >> $HGRCPATH
  $ echo "refresh=0" >> $HGRCPATH

test with delay=0, refresh=0

  $ hg -y loop 3
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
no progress with --quiet
  $ hg -y loop 3 --quiet

test plain mode exception
  $ HGPLAINEXCEPT=progress hg -y loop 1
  \r (no-eol) (esc)
  loop [                                                ] 0/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test nested short-lived topics (which shouldn't display with nestdelay):

  $ hg -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Test nested long-lived topic which has the same name as a short-lived
peer. We shouldn't get stuck showing the short-lived inner steps, and
should go back to skipping the inner steps when the slow nested step
finishes.

  $ hg -y loop 7 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/7\r (no-eol) (esc)
  loop [=====>                                          ] 1/7\r (no-eol) (esc)
  loop [============>                                   ] 2/7\r (no-eol) (esc)
  loop [===================>                            ] 3/7\r (no-eol) (esc)
  loop [==========================>                     ] 4/7\r (no-eol) (esc)
  nested [==========================>                   ] 3/5\r (no-eol) (esc)
  nested [===================================>          ] 4/5\r (no-eol) (esc)
  loop [=================================>              ] 5/7\r (no-eol) (esc)
  loop [========================================>       ] 6/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ hg --config progress.changedelay=0 -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
  $ hg loop 3 --parallel
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
test refresh is taken in account

  $ hg -y --config progress.refresh=100 loop 3

test format options 1

  $ hg -y --config 'progress.format=number topic item+2' loop 2
  \r (no-eol) (esc)
  0/2 loop lo\r (no-eol) (esc)
  1/2 loop lo\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options 2

  $ hg -y --config 'progress.format=number item-3 bar' loop 2
  \r (no-eol) (esc)
  0/2 p.0 [                                                 ]\r (no-eol) (esc)
  1/2 p.1 [=======================>                         ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options and indeterminate progress

  $ hg -y --config 'progress.format=number item bar' loop -- -2
  \r (no-eol) (esc)
  0 loop.0               [ <=>                              ]\r (no-eol) (esc)
  1 loop.1               [  <=>                             ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

make sure things don't fall over if count > total

  $ hg -y loop --total 4 6
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [===========>                                    ] 1/4\r (no-eol) (esc)
  loop [=======================>                        ] 2/4\r (no-eol) (esc)
  loop [===================================>            ] 3/4\r (no-eol) (esc)
  loop [===============================================>] 4/4\r (no-eol) (esc)
  loop [ <=>                                            ] 5/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test immediate progress completion

  $ hg -y loop 0

test delay time estimates

#if no-chg

  $ cp $HGRCPATH.orig $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mocktime=$TESTDIR/mocktime.py" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "delay=25" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

  $ MOCKTIME=11 hg -y loop 8
  \r (no-eol) (esc)
  loop [=========>                                ] 2/8 1m07s\r (no-eol) (esc)
  loop [===============>                            ] 3/8 56s\r (no-eol) (esc)
  loop [=====================>                      ] 4/8 45s\r (no-eol) (esc)
  loop [==========================>                 ] 5/8 34s\r (no-eol) (esc)
  loop [================================>           ] 6/8 23s\r (no-eol) (esc)
  loop [=====================================>      ] 7/8 12s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=10000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 8h21m\r (no-eol) (esc)
  loop [====================>                     ] 2/4 5h34m\r (no-eol) (esc)
  loop [==============================>           ] 3/4 2h47m\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=1000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 5w00d\r (no-eol) (esc)
  loop [====================>                     ] 2/4 3w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 11d14h\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ MOCKTIME=14000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 1y18w\r (no-eol) (esc)
  loop [===================>                     ] 2/4 46w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 23w02d\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Non-linear progress:

  $ MOCKTIME='20 20 20 20 20 20 20 20 20 20 500 500 500 500 500 20 20 20 20 20' hg -y loop 20
  \r (no-eol) (esc)
  loop [=>                                      ]  1/20 6m21s\r (no-eol) (esc)
  loop [===>                                    ]  2/20 6m01s\r (no-eol) (esc)
  loop [=====>                                  ]  3/20 5m41s\r (no-eol) (esc)
  loop [=======>                                ]  4/20 5m21s\r (no-eol) (esc)
  loop [=========>                              ]  5/20 5m01s\r (no-eol) (esc)
  loop [===========>                            ]  6/20 4m41s\r (no-eol) (esc)
  loop [=============>                          ]  7/20 4m21s\r (no-eol) (esc)
  loop [===============>                        ]  8/20 4m01s\r (no-eol) (esc)
  loop [================>                      ]  9/20 25m40s\r (no-eol) (esc)
  loop [===================>                    ] 10/20 1h06m\r (no-eol) (esc)
  loop [=====================>                  ] 11/20 1h13m\r (no-eol) (esc)
  loop [=======================>                ] 12/20 1h07m\r (no-eol) (esc)
  loop [========================>              ] 13/20 58m19s\r (no-eol) (esc)
  loop [===========================>            ] 14/20 7m09s\r (no-eol) (esc)
  loop [=============================>          ] 15/20 3m38s\r (no-eol) (esc)
  loop [===============================>        ] 16/20 2m15s\r (no-eol) (esc)
  loop [=================================>      ] 17/20 1m27s\r (no-eol) (esc)
  loop [====================================>     ] 18/20 52s\r (no-eol) (esc)
  loop [======================================>   ] 19/20 25s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Time estimates should not fail when there's no end point:
  $ MOCKTIME=11 hg -y loop -- -4
  \r (no-eol) (esc)
  loop [ <=>                                              ] 2\r (no-eol) (esc)
  loop [  <=>                                             ] 3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

#endif

test line trimming by '[progress] width', when progress topic contains
multi-byte characters, of which length of byte sequence and columns in
display are different from each other.

  $ cp $HGRCPATH.orig $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress=
  > loop=`pwd`/loop.py
  > [progress]
  > assume-tty = 1
  > delay = 0
  > refresh = 0
  > EOF

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as topic label of progress
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8')
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic number
  > width= 12
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc)
              \r (no-eol) (esc)

test calculation of bar width, when progress topic contains multi-byte
characters, of which length of byte sequence and columns in display
are different from each other.

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic bar
  > width= 21
  > # progwidth should be 9 (= 21 - (8+1) - 3)
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [         ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==>      ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====>   ]\r (no-eol) (esc)
                       \r (no-eol) (esc)

test trimming progress items, when they contain multi-byte characters,
of which length of byte sequence and columns in display are different
from each other.

  $ rm -f loop.pyc
  $ rm -Rf __pycache__
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as loop items of progress
  > loopitems = [
  >     u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns
  >     u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns
  >     u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns
  > ]
  > def getloopitem(i):
  >     return loopitems[i % len(loopitems)]
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at tail side
  > format = item+6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
                       \r (no-eol) (esc)

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at left side
  > format = item-6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc)
                       \r (no-eol) (esc)