view tests/test-rename.t @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests

This is fixing quadratic behavior, which is probably not noticeable in the
common case, but if a very large directory gets added here, it can get pretty
bad. This was noticed because we had some pushes that spent >25s in changegroup
generation calling min() here, according to profiling.

The original reasoning for min() being used in 829d369fc5a8 was that, at that
point in the series, we were adding almost everything to tmfnodes during the
first iteration through the loop , so we needed to avoid sending child
directories before parents. Later changes made it so that the child directories
were added only when we visited the parent directory (not all of them on the
first iteration), so this is no longer necessary - there won't be any child
directories in tmfnodes before the parents have been sent.

This does mean that the manifests are now exchanged unordered, whereas
previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b,
and e in any order; b/c must still follow b, and b/c/d must still follow b/c.

Differential Revision: https://phab.mercurial-scm.org/D1351

  $ hg init
  $ mkdir d1 d1/d11 d2
  $ echo d1/a > d1/a
  $ echo d1/ba > d1/ba
  $ echo d1/a1 > d1/d11/a1
  $ echo d1/b > d1/b
  $ echo d2/b > d2/b
  $ hg add d1/a d1/b d1/ba d1/d11/a1 d2/b
  $ hg commit -m "1"

rename a single file

  $ hg rename d1/d11/a1 d2/c
  $ hg --config ui.portablefilenames=abort rename d1/a d1/con.xml
  abort: filename contains 'con', which is reserved on Windows: d1/con.xml
  [255]
  $ hg sum
  parent: 0:9b4b6e7b2c26 tip
   1
  branch: default
  commit: 1 renamed
  update: (current)
  phases: 1 draft
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename a single file using absolute paths

  $ hg rename `pwd`/d1/d11/a1 `pwd`/d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file

  $ mv d1/d11/a1 d2/c
  $ hg rename --after d1/d11/a1 d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file when src and tgt already tracked

  $ mv d1/d11/a1 d2/c
  $ hg addrem -s 0
  removing d1/d11/a1
  adding d2/c
  $ hg rename --after d1/d11/a1 d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file to a nonexistent target filename

  $ hg rename --after d1/a dummy
  d1/a: not recording move - dummy does not exist (glob)

move a single file to an existing directory

  $ hg rename d1/d11/a1 d2
  $ hg status -C
  A d2/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a1

move --after a single file to an existing directory

  $ mv d1/d11/a1 d2
  $ hg rename --after d1/d11/a1 d2
  $ hg status -C
  A d2/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a1

rename a file using a relative path

  $ (cd d1/d11; hg rename ../../d2/b e)
  $ hg status -C
  A d1/d11/e
    d2/b
  R d2/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/d11/e

rename --after a file using a relative path

  $ (cd d1/d11; mv ../../d2/b e; hg rename --after ../../d2/b e)
  $ hg status -C
  A d1/d11/e
    d2/b
  R d2/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/d11/e

rename directory d1 as d3

  $ hg rename d1/ d3
  moving d1/a to d3/a (glob)
  moving d1/b to d3/b (glob)
  moving d1/ba to d3/ba (glob)
  moving d1/d11/a1 to d3/d11/a1 (glob)
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

rename --after directory d1 as d3

  $ mv d1 d3
  $ hg rename --after d1 d3
  moving d1/a to d3/a (glob)
  moving d1/b to d3/b (glob)
  moving d1/ba to d3/ba (glob)
  moving d1/d11/a1 to d3/d11/a1 (glob)
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a directory using a relative path

  $ (cd d2; mkdir d3; hg rename ../d1/d11 d3)
  moving ../d1/d11/a1 to d3/d11/a1 (glob)
  $ hg status -C
  A d2/d3/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d3

move --after a directory using a relative path

  $ (cd d2; mkdir d3; mv ../d1/d11 d3; hg rename --after ../d1/d11 d3)
  moving ../d1/d11/a1 to d3/d11/a1 (glob)
  $ hg status -C
  A d2/d3/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d3

move directory d1/d11 to an existing directory d2 (removes empty d1)

  $ hg rename d1/d11/ d2
  moving d1/d11/a1 to d2/d11/a1 (glob)
  $ hg status -C
  A d2/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d11

move directories d1 and d2 to a new directory d3

  $ mkdir d3
  $ hg rename d1 d2 d3
  moving d1/a to d3/d1/a (glob)
  moving d1/b to d3/d1/b (glob)
  moving d1/ba to d3/d1/ba (glob)
  moving d1/d11/a1 to d3/d1/d11/a1 (glob)
  moving d2/b to d3/d2/b (glob)
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  A d3/d2/b
    d2/b
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  R d2/b
  $ hg update -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move --after directories d1 and d2 to a new directory d3

  $ mkdir d3
  $ mv d1 d2 d3
  $ hg rename --after d1 d2 d3
  moving d1/a to d3/d1/a (glob)
  moving d1/b to d3/d1/b (glob)
  moving d1/ba to d3/d1/ba (glob)
  moving d1/d11/a1 to d3/d1/d11/a1 (glob)
  moving d2/b to d3/d2/b (glob)
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  A d3/d2/b
    d2/b
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  R d2/b
  $ hg update -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move everything under directory d1 to existing directory d2, do not
overwrite existing files (d2/b)

  $ hg rename d1/* d2
  d2/b: not overwriting - file already committed
  (hg rename --force to replace the file by recording a rename)
  moving d1/d11/a1 to d2/d11/a1 (glob)
  $ hg status -C
  A d2/a
    d1/a
  A d2/ba
    d1/ba
  A d2/d11/a1
    d1/d11/a1
  R d1/a
  R d1/ba
  R d1/d11/a1
  $ diff -u d1/b d2/b
  --- d1/b	* (glob)
  +++ d2/b	* (glob)
  @@ * (glob)
  -d1/b
  +d2/b
  [1]
  $ hg update -C
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a d2/ba d2/d11/a1

attempt to move one file into a non-existent directory

  $ hg rename d1/a dx/
  abort: destination dx/ is not a directory
  [255]
  $ hg status -C
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

attempt to move potentially more than one file into a non-existent directory

  $ hg rename 'glob:d1/**' dx
  abort: with multiple sources, destination must be an existing directory
  [255]

move every file under d1 to d2/d21 (glob)

  $ mkdir d2/d21
  $ hg rename 'glob:d1/**' d2/d21
  moving d1/a to d2/d21/a (glob)
  moving d1/b to d2/d21/b (glob)
  moving d1/ba to d2/d21/ba (glob)
  moving d1/d11/a1 to d2/d21/a1 (glob)
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  A d2/d21/b
    d1/b
  A d2/d21/ba
    d1/ba
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

move --after some files under d1 to d2/d21 (glob)

  $ mkdir d2/d21
  $ mv d1/a d1/d11/a1 d2/d21
  $ hg rename --after 'glob:d1/**' d2/d21
  moving d1/a to d2/d21/a (glob)
  d1/b: not recording move - d2/d21/b does not exist (glob)
  d1/ba: not recording move - d2/d21/ba does not exist (glob)
  moving d1/d11/a1 to d2/d21/a1 (glob)
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  R d1/a
  R d1/d11/a1
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

move every file under d1 starting with an 'a' to d2/d21 (regexp)

  $ mkdir d2/d21
  $ hg rename 're:d1/([^a][^/]*/)*a.*' d2/d21
  moving d1/a to d2/d21/a (glob)
  moving d1/d11/a1 to d2/d21/a1 (glob)
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  R d1/a
  R d1/d11/a1
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

attempt to overwrite an existing file

  $ echo "ca" > d1/ca
  $ hg rename d1/ba d1/ca
  d1/ca: not overwriting - file exists
  (hg rename --after to record the rename)
  $ hg status -C
  ? d1/ca
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

forced overwrite of an existing file

  $ echo "ca" > d1/ca
  $ hg rename --force d1/ba d1/ca
  $ hg status -C
  A d1/ca
    d1/ba
  R d1/ba
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca

attempt to overwrite an existing broken symlink

#if symlink
  $ ln -s ba d1/ca
  $ hg rename --traceback d1/ba d1/ca
  d1/ca: not overwriting - file exists
  (hg rename --after to record the rename)
  $ hg status -C
  ? d1/ca
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca

replace a symlink with a file

  $ ln -s ba d1/ca
  $ hg rename --force d1/ba d1/ca
  $ hg status -C
  A d1/ca
    d1/ba
  R d1/ba
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca
#endif

do not copy more than one source file to the same destination file

  $ mkdir d3
  $ hg rename d1/* d2/* d3
  moving d1/d11/a1 to d3/d11/a1 (glob)
  d3/b: not overwriting - d2/b collides with d1/b
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a whole subtree with "hg rename ."

  $ mkdir d3
  $ (cd d1; hg rename . ../d3)
  moving a to ../d3/d1/a
  moving b to ../d3/d1/b
  moving ba to ../d3/d1/ba
  moving d11/a1 to ../d3/d1/d11/a1 (glob)
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a whole subtree with "hg rename --after ."

  $ mkdir d3
  $ mv d1/* d3
  $ (cd d1; hg rename --after . ../d3)
  moving a to ../d3/a
  moving b to ../d3/b
  moving ba to ../d3/ba
  moving d11/a1 to ../d3/d11/a1 (glob)
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move the parent tree with "hg rename .."

  $ (cd d1/d11; hg rename .. ../../d3)
  moving ../a to ../../d3/a (glob)
  moving ../b to ../../d3/b (glob)
  moving ../ba to ../../d3/ba (glob)
  moving a1 to ../../d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

skip removed files

  $ hg remove d1/b
  $ hg rename d1 d3
  moving d1/a to d3/a (glob)
  moving d1/ba to d3/ba (glob)
  moving d1/d11/a1 to d3/d11/a1 (glob)
  $ hg status -C
  A d3/a
    d1/a
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

transitive rename

  $ hg rename d1/b d1/bb
  $ hg rename d1/bb d1/bc
  $ hg status -C
  A d1/bc
    d1/b
  R d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/bc

transitive rename --after

  $ hg rename d1/b d1/bb
  $ mv d1/bb d1/bc
  $ hg rename --after d1/bb d1/bc
  $ hg status -C
  A d1/bc
    d1/b
  R d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/bc

  $ echo "# idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)"
  # idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)
  $ hg rename d1/b d1/bb
  $ echo "some stuff added to d1/bb" >> d1/bb
  $ hg rename d1/bb d1/b
  $ hg status -C
  M d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

overwriting with renames (issue1959)

  $ hg rename d1/a d1/c
  $ hg rename d1/b d1/a
  $ hg status -C
  M d1/a
    d1/b
  A d1/c
    d1/a
  R d1/b
  $ hg diff --git
  diff --git a/d1/a b/d1/a
  --- a/d1/a
  +++ b/d1/a
  @@ -1,1 +1,1 @@
  -d1/a
  +d1/b
  diff --git a/d1/b b/d1/b
  deleted file mode 100644
  --- a/d1/b
  +++ /dev/null
  @@ -1,1 +0,0 @@
  -d1/b
  diff --git a/d1/a b/d1/c
  copy from d1/a
  copy to d1/c
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/c # The file was marked as added, so 'hg update' action  was 'forget'

check illegal path components

  $ hg rename d1/d11/a1 .hg/foo
  abort: path contains illegal component: .hg/foo (glob)
  [255]
  $ hg status -C
  $ hg rename d1/d11/a1 ../foo
  abort: ../foo not under root '$TESTTMP'
  [255]
  $ hg status -C

  $ mv d1/d11/a1 .hg/foo
  $ hg rename --after d1/d11/a1 .hg/foo
  abort: path contains illegal component: .hg/foo (glob)
  [255]
  $ hg status -C
  ! d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm .hg/foo

  $ hg rename d1/d11/a1 .hg
  abort: path contains illegal component: .hg/a1 (glob)
  [255]
  $ hg --config extensions.largefiles= rename d1/d11/a1 .hg
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  abort: path contains illegal component: .hg/a1 (glob)
  [255]
  $ hg status -C
  $ hg rename d1/d11/a1 ..
  abort: ../a1 not under root '$TESTTMP' (glob)
  [255]
  $ hg --config extensions.largefiles= rename d1/d11/a1 ..
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  abort: ../a1 not under root '$TESTTMP' (glob)
  [255]
  $ hg status -C

  $ mv d1/d11/a1 .hg
  $ hg rename --after d1/d11/a1 .hg
  abort: path contains illegal component: .hg/a1 (glob)
  [255]
  $ hg status -C
  ! d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm .hg/a1

  $ (cd d1/d11; hg rename ../../d2/b ../../.hg/foo)
  abort: path contains illegal component: .hg/foo (glob)
  [255]
  $ hg status -C
  $ (cd d1/d11; hg rename ../../d2/b ../../../foo)
  abort: ../../../foo not under root '$TESTTMP'
  [255]
  $ hg status -C