view tests/test-sparse-profiles.t @ 35012:d80380ba8e7d

changegroup: use any node, not min(), in treemanifest's generatemanifests

This is fixing quadratic behavior, which is probably not noticeable in the
common case, but if a very large directory gets added here, it can get pretty
bad. This was noticed because we had some pushes that spent >25s in changegroup
generation calling min() here, according to profiling.

The original reasoning for min() being used in 829d369fc5a8 was that, at that
point in the series, we were adding almost everything to tmfnodes during the
first iteration through the loop , so we needed to avoid sending child
directories before parents. Later changes made it so that the child directories
were added only when we visited the parent directory (not all of them on the
first iteration), so this is no longer necessary - there won't be any child
directories in tmfnodes before the parents have been sent.

This does mean that the manifests are now exchanged unordered, whereas
previously we would essentially do [a, b, b/c, b/c/d, e], we now can send a, b,
and e in any order; b/c must still follow b, and b/c/d must still follow b/c.

Differential Revision: https://phab.mercurial-scm.org/D1351

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > purge=
  > strip=
  > rebase=
  > EOF

Config file without [section] is rejected

  $ cat > bad.sparse <<EOF
  > *.html
  > EOF

  $ hg debugsparse --import-rules bad.sparse
  abort: sparse config entry outside of section: *.html
  (add an [include] or [exclude] line to declare the entry type)
  [255]
  $ rm bad.sparse

  $ echo a > index.html
  $ echo x > data.py
  $ echo z > readme.txt
  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > EOF
  $ hg ci -Aqm 'initial'

  $ hg debugsparse --include '*.sparse'

Verify enabling a single profile works

  $ hg debugsparse --enable-profile webpage.sparse
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify enabling two profiles works

  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify disabling a profile works

  $ hg debugsparse --disable-profile webpage.sparse
  $ ls
  backend.sparse
  data.py
  webpage.sparse

Verify that a profile is updated across multiple commits

  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > *.txt
  > EOF

  $ echo foo >> data.py

  $ hg ci -m 'edit profile'
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg up -q 0
  $ ls
  backend.sparse
  data.py
  webpage.sparse

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

Introduce a conflicting .hgsparse change

  $ hg up -q 0
  $ cat > backend.sparse <<EOF
  > # Different backend sparse profile
  > [include]
  > *.html
  > EOF
  $ echo bar >> data.py

  $ hg ci -qAm "edit profile other"
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify conflicting merge pulls in the conflicting changes

  $ hg merge 1
  temporarily included 1 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 2 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving the merge removes the temporarily unioned files

  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)

  $ hg ci -qAm "merge profiles"
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Verify stripping refreshes dirstate

  $ hg strip -q -r .
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify rebase conflicts pulls in the conflicting changes

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg rebase -d 2
  rebasing 1:a2b1de640a62 "edit profile"
  temporarily included 1 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]
  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving conflict removes the temporary files

  $ cat > backend.sparse <<EOF
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)
  continue: hg rebase --continue

  $ hg rebase -q --continue
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Test checking out a commit that does not contain the sparse profile. The
warning message can be suppressed by setting missingwarning = false in
[sparse] section of your config:

  $ hg debugsparse --reset
  $ hg rm *.sparse
  $ hg commit -m "delete profiles"
  $ hg up -q ".^"
  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  index.html
  readme.txt
  $ hg up tip | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ ls
  data.py
  index.html
  readme.txt
  $ hg debugsparse --disable-profile backend.sparse | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ cat >> .hg/hgrc <<EOF
  > [sparse]
  > missingwarning = false
  > EOF
  $ hg debugsparse --enable-profile backend.sparse

  $ cd ..

#if unix-permissions

Test file permissions changing across a sparse profile change
  $ hg init sparseperm
  $ cd sparseperm
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ touch a b
  $ cat > .hgsparse <<EOF
  > [include]
  > a
  > EOF
  $ hg commit -Aqm 'initial'
  $ chmod a+x b
  $ hg commit -qm 'make executable'
  $ cat >> .hgsparse <<EOF
  > b
  > EOF
  $ hg commit -qm 'update profile'
  $ hg up -q 0
  $ hg debugsparse --enable-profile .hgsparse
  $ hg up -q 2
  $ ls -l b
  -rwxr-xr-x* b (glob)

#endif