changegroup: cg3 has two empty groups *after* manifests
changegroup.getchunks() determines the end of the stream by looking
for an empty chunk group (two consecutive empty chunks). It ignores
empty groups in the first two groups. Changegroup 3 introduced an
empty chunk between the manifests and the files, which confuses
getchunks(). Since it comes after the first two, getchunks() will stop
there.
Fix by rewriting getchunks so it first counts two groups (empty or
not) and then keeps antostarts counting empty groups. With this counting,
changegroup 1 and 2 have exactly one empty group after the first two
groups, while changegroup 3 has two (one for directories and one for
files).
It's a little hard to test this at this point, but I have verified
that this patch fixes narrowhg (which was broken before this
patch). Also, future patches will fix "hg strip" with treemanifests,
and once that's done, getchunks() will be tested through tests of "hg
strip".
#require svn svn-bindings
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
$ SVNREPOPATH=`pwd`/svn-repo
#if windows
$ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
$ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif
Convert trunk and branches
$ hg convert --datesort "$SVNREPOURL"/subproject A-hg
initializing destination A-hg repository
scanning source...
sorting...
converting...
13 createtrunk
12 moved1
11 moved1
10 moved2
9 changeb and rm d2
8 changeb and rm d2
7 moved1again
6 moved1again
5 copyfilefrompast
4 copydirfrompast
3 add d3
2 copy dir and remove subdir
1 add d4old
0 rename d4old into d4new
$ cd A-hg
$ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
o 13 rename d4old into d4new files: d4new/g d4old/g
|
o 12 add d4old files: d4old/g
|
o 11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
|
o 10 add d3 files: d3/d31/e d3/f
|
o 9 copydirfrompast files: d2/d
|
o 8 copyfilefrompast files: d
|
o 7 moved1again files: d1/b d1/c
|
| o 6 moved1again files:
| |
o | 5 changeb and rm d2 files: d1/b d2/d
| |
| o 4 changeb and rm d2 files: b
| |
o | 3 moved2 files: d2/d
| |
o | 2 moved1 files: d1/b d1/c
| |
| o 1 moved1 files: b c
|
o 0 createtrunk files:
Check move copy records
$ hg st --rev 12:13 --copies
A d4new/g
d4old/g
R d4old/g
Check branches
$ hg branches
default 13:* (glob)
d1 6:* (glob)
$ cd ..
$ mkdir test-replace
$ cd test-replace
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"
Convert files being replaced by directories
$ hg convert svn-repo hg-repo
initializing destination hg-repo repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd hg-repo
Manifest before
$ hg -v manifest -r 1
644 a
644 d/b
644 d2/a
644 @ dlink
644 @ dlink2
644 dlink3
Manifest after clobber1
$ hg -v manifest -r 2
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 dlink3
Manifest after clobber2
$ hg -v manifest -r 3
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 @ dlink3
Manifest after clobberdir
$ hg -v manifest -r 6
644 a/b
644 d/b
644 d2/a
644 d2/c
644 dlink/b
644 @ dlink2
644 @ dlink3
Try updating
$ hg up -qC default
$ cd ..
Test convert progress bar
$ cat >> $HGRCPATH <<EOF
> [extensions]
> progress =
> [progress]
> assume-tty = 1
> delay = 0
> changedelay = 0
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg convert svn-repo hg-progress
\r (no-eol) (esc)
scanning [=====> ] 1/7\r (no-eol) (esc)
scanning [===========> ] 2/7\r (no-eol) (esc)
scanning [=================> ] 3/7\r (no-eol) (esc)
scanning [========================> ] 4/7\r (no-eol) (esc)
scanning [==============================> ] 5/7\r (no-eol) (esc)
scanning [====================================> ] 6/7\r (no-eol) (esc)
scanning [===========================================>] 7/7\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [ ] 0/7\r (no-eol) (esc)
getting files [=====> ] 1/6\r (no-eol) (esc)
getting files [============> ] 2/6\r (no-eol) (esc)
getting files [==================> ] 3/6\r (no-eol) (esc)
getting files [=========================> ] 4/6\r (no-eol) (esc)
getting files [===============================> ] 5/6\r (no-eol) (esc)
getting files [======================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=====> ] 1/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===========> ] 2/7\r (no-eol) (esc)
scanning paths [ ] 0/2\r (no-eol) (esc)
scanning paths [==================> ] 1/2\r (no-eol) (esc)
getting files [========> ] 1/4\r (no-eol) (esc)
getting files [==================> ] 2/4\r (no-eol) (esc)
getting files [============================> ] 3/4\r (no-eol) (esc)
getting files [======================================>] 4/4\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=================> ] 3/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=======================> ] 4/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=============================> ] 5/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===================================> ] 6/7\r (no-eol) (esc)
scanning paths [ ] 0/3\r (no-eol) (esc)
scanning paths [===========> ] 1/3\r (no-eol) (esc)
scanning paths [========================> ] 2/3\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
initializing destination hg-progress repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd ..