changegroup: cg3 has two empty groups *after* manifests
changegroup.getchunks() determines the end of the stream by looking
for an empty chunk group (two consecutive empty chunks). It ignores
empty groups in the first two groups. Changegroup 3 introduced an
empty chunk between the manifests and the files, which confuses
getchunks(). Since it comes after the first two, getchunks() will stop
there.
Fix by rewriting getchunks so it first counts two groups (empty or
not) and then keeps antostarts counting empty groups. With this counting,
changegroup 1 and 2 have exactly one empty group after the first two
groups, while changegroup 3 has two (one for directories and one for
files).
It's a little hard to test this at this point, but I have verified
that this patch fixes narrowhg (which was broken before this
patch). Also, future patches will fix "hg strip" with treemanifests,
and once that's done, getchunks() will be tested through tests of "hg
strip".
test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository
$ . "$TESTDIR/histedit-helpers.sh"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> histedit=
> EOF
$ initrepo ()
> {
> dir="$1"
> comment="$2"
> if [ -n "${comment}" ]; then
> echo % ${comment}
> echo % ${comment} | sed 's:.:-:g'
> fi
> hg init ${dir}
> cd ${dir}
> for x in a b c d e f ; do
> echo $x > $x
> hg add $x
> hg ci -m $x
> done
> cd ..
> }
$ geneditor ()
> {
> # generate an editor script for selecting changesets to be edited
> choice=$1 # changesets that should be edited (using sed line ranges)
> cat <<EOF | sed 's:^....::'
> # editing the rules, replacing 'pick' with 'edit' for the chosen lines
> sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
> mv "\${1}.tmp" "\$1"
> # displaying the resulting rules, minus comments and empty lines
> sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
> EOF
> }
$ startediting ()
> {
> # begin an editing session
> choice="$1" # changesets that should be edited
> number="$2" # number of changesets considered (from tip)
> comment="$3"
> geneditor "${choice}" > edit.sh
> echo % start editing the history ${comment}
> HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
> }
$ continueediting ()
> {
> # continue an edit already in progress
> editor="$1" # message editor when finalizing editing
> comment="$2"
> echo % finalize changeset editing ${comment}
> HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
> }
$ graphlog ()
> {
> comment="${1:-log}"
> echo % "${comment}"
> hg log -G --template '{rev} {node} \"{desc|firstline}\"\n'
> }
$ initrepo r1 "test editing with no change"
% test editing with no change
-----------------------------
$ cd r1
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
% start editing the history (not changing anything)
| pick 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
Editing (e860deea161a), you may commit or record as needed now.
(hg histedit --continue to resume)
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
check state of working copy
$ hg id
794fe033d0a0 tip
$ graphlog "log after history editing"
% log after history editing
@ 5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
|
o 4 04d2fab980779f332dec458cc944f28de8b43435 "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ cd ..
$ initrepo r2 "test editing with no change, then abort"
% test editing with no change, then abort
-----------------------------------------
$ cd r2
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
% start editing the history (not changing anything)
| edit 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 3 files removed, 0 files unresolved
Editing (055a42cdd887), you may commit or record as needed now.
(hg histedit --continue to resume)
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
Editing (e860deea161a), you may commit or record as needed now.
(hg histedit --continue to resume)
$ graphlog "log after first edit"
% log after first edit
@ 6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
|
| o 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
| |
| o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
| |
| o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|/
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
abort editing session, after first forcibly updating away
$ hg up 0
abort: histedit in progress
(use 'hg histedit --continue' or 'hg histedit --abort')
[255]
$ mv .hg/histedit-state .hg/histedit-state-ignore
$ hg up 0
0 files updated, 0 files merged, 3 files removed, 0 files unresolved
$ mv .hg/histedit-state-ignore .hg/histedit-state
$ hg sum
parent: 0:cb9a9f314b8b
a
branch: default
commit: 1 added, 1 unknown (new branch head)
update: 6 new changesets (update)
phases: 7 draft
hist: 2 remaining (histedit --continue)
$ hg histedit --abort 2>&1 | fixbundle
modified files should survive the abort when we've moved away already
$ hg st
A e
? edit.sh
$ graphlog "log after abort"
% log after abort
o 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
@ 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
aborting and not changing files can skip mentioning updating (no) files
$ hg up
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg commit --close-branch -m 'closebranch'
$ startediting 1 1 "(not changing anything)" # edit the 3rd of 3 changesets
% start editing the history (not changing anything)
| edit 292aec348d9e 6 closebranch
Editing (292aec348d9e), you may commit or record as needed now.
(hg histedit --continue to resume)
$ hg histedit --abort
$ cd ..