bundle2: implement consume() API on unbundlepart
We want bundle parts to not be seekable by default. That means
eliminating the generic seek() method.
A common pattern in bundle2.py is to seek to the end of the part
data. This is mainly used by the part iteration code to ensure
the underlying stream is advanced to the next bundle part.
In this commit, we establish a dedicated API for consuming a
bundle2 part data. We switch users of seek() to it.
The old implementation of seek(0, os.SEEK_END) would effectively
call self.read(). The new implementation calls self.read(32768)
in a loop. The old implementation would therefore assemble a
buffer to hold all remaining data being seeked over. For seeking
over large bundle parts, this would involve a large allocation and
a lot of overhead to collect intermediate data! This overhead can
be seen in the results for `hg perfbundleread`:
! bundle2 iterparts()
! wall 10.891305 comb 10.820000 user 7.990000 sys 2.830000 (best of 3)
! wall 8.070791 comb 8.060000 user 7.180000 sys 0.880000 (best of 3)
! bundle2 part seek()
! wall 12.991478 comb 10.390000 user 7.720000 sys 2.670000 (best of 3)
! wall 10.370142 comb 10.350000 user 7.430000 sys 2.920000 (best of 3)
Of course, skipping over large payload data isn't likely very common.
So I doubt the performance wins will be observed in the wild.
Differential Revision: https://phab.mercurial-scm.org/D1388
Test interactions between mq and patch.eol
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [diff]
> nodates = 1
> EOF
$ cat > makepatch.py <<EOF
> f = file('eol.diff', 'wb')
> w = f.write
> w('test message\n')
> w('diff --git a/a b/a\n')
> w('--- a/a\n')
> w('+++ b/a\n')
> w('@@ -1,5 +1,5 @@\n')
> w(' a\n')
> w('-b\r\n')
> w('+y\r\n')
> w(' c\r\n')
> w(' d\n')
> w('-e\n')
> w('\ No newline at end of file\n')
> w('+z\r\n')
> w('\ No newline at end of file\r\n')
> EOF
$ cat > cateol.py <<EOF
> import sys
> for line in file(sys.argv[1], 'rb'):
> line = line.replace('\r', '<CR>')
> line = line.replace('\n', '<LF>')
> print(line)
> EOF
$ hg init repo
$ cd repo
$ echo '\.diff' > .hgignore
$ echo '\.rej' >> .hgignore
Test different --eol values
$ $PYTHON -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
$ hg ci -Am adda
adding .hgignore
adding a
$ $PYTHON ../makepatch.py
$ hg qimport eol.diff
adding eol.diff to series file
should fail in strict mode
$ hg qpush
applying eol.diff
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
invalid eol
$ hg --config patch.eol='LFCR' qpush
applying eol.diff
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
force LF
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ hg qrefresh
$ $PYTHON ../cateol.py .hg/patches/eol.diff
# HG changeset patch<LF>
# Parent 0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
test message<LF>
<LF>
diff -r 0d0bf99a8b7a a<LF>
--- a/a<LF>
+++ b/a<LF>
@@ -1,5 +1,5 @@<LF>
-a<LF>
-b<LF>
-c<LF>
-d<LF>
-e<LF>
\ No newline at end of file<LF>
+a<CR><LF>
+y<CR><LF>
+c<CR><LF>
+d<CR><LF>
+z<LF>
\ No newline at end of file<LF>
$ $PYTHON ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again forcing LF and compare revisions
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ $PYTHON ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again without LF and compare revisions
$ hg qpush
applying eol.diff
now at: eol.diff
$ $PYTHON ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
$ cd ..
Test .rej file EOL are left unchanged
$ hg init testeol
$ cd testeol
$ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
$ hg ci -Am adda
adding a
$ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
$ hg qnew patch1
$ hg qpop
popping patch1
patch queue now empty
$ $PYTHON -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
$ hg ci -m changea
$ hg --config 'patch.eol=LF' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ hg --config 'patch.eol=auto' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ cd ..