changegroup: remove reordering control (BC)
This logic - including the experimental bundle.reorder option -
was originally added in
a8e3931e3fb5 in 2011 and then later ported
to changegroup.py.
The intent of this option and associated logic is to control
the ordering of revisions in deltagroups in changegroups. At the
time it was implemented, only changegroup version 1 existed
and generaldelta revlogs were just coming into the world. Changegroup
version 1 requires that deltas be made against the last revision
sent over the wire. Used with generaldelta, this created an
impedance mismatch of sorts and resulted in changegroup producers
spending a lot of time recomputing deltas.
Revision reordering was introduced so outgoing revisions would be
sent in "generaldelta order" and producers would be able to
reuse internal deltas from storage.
Later on, we introduced changegroup version 2. It supported denoting
which revision a delta was against. So we no longer needed to
sort outgoing revisions to ensure optimal delta generation from the
producer. So, subsequent changegroup versions disabled reordering.
We also later made the changelog not store deltas by default. And
we also made the changelog send out deltas in storage order. Why we
do this for changelog, I'm not sure. Maybe we want to preserve revision
order across clones? It doesn't really matter for this commit.
Fast forward to 2018. We want to abstract storage backends. And having
changegroup code require knowledge about how deltas are stored
internally interferes with that goal.
This commit removes reordering control from changegroup generation.
After this commit, the reordering behavior is:
* The changelog is always sent out in storage order (no behavior
change).
* Non-changelog generaldelta revlogs are reordered to always be in DAG
topological order (previously, generaldelta revlogs would be emitted
in storage order for version 2 and 3 changegroups).
* Non-changelog non-generaldelta revlogs are sent in storage order (no
behavior change).
* There exists no config option to override behavior.
The big difference here is that generaldelta revlogs now *always* have
their revisions sorted in DAG order before going out over the wire. This
behavior was previously only done for changegroup version 1. Version 2
and version 3 changegroups disabled reordering because the interchange
format supported encoding arbitrary delta parents, so reordering wasn't
strictly necessary.
I can think of a few significant implications for this change.
Because changegroup receivers will now see non-changelog revisions
in DAG order instead of storage order, the internal storage order of
manifests and files may differ substantially between producer and
consumer. I don't think this matters that much, since the storage
order of manifests and files is largely hidden from users. Only
the storage order of changelog matters (because `hg log` shows the
changelog in storage order). I don't think there should be any
controversy here.
The reordering of revisions has implications for changegroup producers.
Previously, generaldelta revlogs would be emitted in storage order.
And in the common case, the internally-stored delta could effectively
be copied from disk into the deltagroup delta. This meant that emitting
delta groups for generaldelta revlogs would be mostly linear read I/O.
This is desirable for performance. With us now reordering generaldelta
revlog revisions in DAG order, the read operations may use more random
I/O instead of sequential I/O. This could result in performance
loss. But with the prevalence of SSDs and fast random I/O, I'm not
too worried. (Note: the optimal emission order for revlogs is actually
delta encoding order. But the changegroup code wasn't doing that before
or after this change. We could potentially implement that in a later
commit.)
Changegroups in DAG order will have implications for receivers.
Previously, receiving storage order might mean seeing a number of
interleaved branches. This would mean long delta chains, sparse
I/O, and possibly more fulltext revisions instead of deltas, blowing
up storage storage. (This is the same set of problems that sparse
revlogs aims to address.) With the producer now sending revisions in DAG
order, the receiver also stores revisions in DAG order. That means
revisions for the same DAG branch are all grouped together. And this
should yield better storage outcomes. In other words, sending the
reordered changegroup allows the receiver to have better storage
order and for the producer to not propagate its (possibly sub-optimal)
internal storage order.
On the mozilla-unified repository, this change influences bundle
generation:
$ hg bundle -t none-v2 -a
before: time: real 355.680 secs (user 256.790+0.000 sys 16.820+0.000)
after: time: real 382.950 secs (user 281.700+0.000 sys 17.690+0.000)
before: 7,150,228,967 bytes (uncompressed)
after: 7,041,556,273 bytes (uncompressed)
before: 1,669,063,234 bytes (zstd l=3)
after: 1,628,598,830 bytes (zstd l=3)
$ hg unbundle
before: time: real 511.910 secs (user 466.750+0.000 sys 32.680+0.000)
after: time: real 487.790 secs (user 443.940+0.000 sys 30.840+0.000)
00manifest.d size:
source: 274,924,292 bytes
before: 304,741,626 bytes
after: 245,252,087 bytes
.hg/store total file size:
source: 2,649,133,490
before: 2,680,888,130
after: 2,627,875,673
We see the bundle size drop. That's probably because if a revlog
internally isn't storing a delta, it will choose to delta against
the last emitted revision. And on repos with interleaved branches
(like mozilla-unified), the previous revision could be an unrelated
branch and therefore be a large delta. But with this patch, the
previous revision is likely p1 or p2 and a delta should be small.
We also see the manifest size drop by ~50 MB. It's worth noting that
the manifest actually *increased* in size by ~25 MB in the old
strategy and decreased ~25 MB from its source in the new strategy.
Again, my explanation for this is that the DAG ordering in the
changegroup is resulting in better grouping of revisions in the
receiver, which results in more compact delta chains and higher
storage efficiency.
Unbundle time also dropped. I suspect this is due to the revlog having
to work less to compute deltas since the incoming deltas are more
optimal. i.e. the receiver spends less time resolving fulltext
revisions as incoming deltas bounce around between DAG branches and
delta chains.
We also see bundle generation time increase. This is not desirable.
However, the regression is only significant on the original repository:
if we generate a bundle from the repository created from the new,
always reordered bundles, we're close to baseline (if not at it with
expected noise):
$ hg bundle -t none-v2 -a
before (original): time: real 355.680 secs (user 256.790+0.000 sys 16.820+0.000)
after (original): time: real 382.950 secs (user 281.700+0.000 sys 17.690+0.000)
after (new repo): time: real 362.280 secs (user 260.300+0.000 sys 17.700+0.000)
This regression is a bit worrying because it will impact serving
canonical repositories (that don't have optimal internal storage
unless they are reordered - possibly as part of running
`hg debugupgraderepo`). However, this regression will only be
noticed by very large changegroups. And I'm guessing/hoping that
any repository that large is using clonebundles to mitigate server
load.
Again, sending DAG order isn't the optimal send order for servers:
sending in storage-delta order is. But in order to enable
storage-optimal send order, we'll need a storage API that handles
sorting. Future commits will introduce such an API.
Differential Revision: https://phab.mercurial-scm.org/D4721
#require no-chg
$ cat > hgrc-sshv2 << EOF
> %include $HGRCPATH
> [experimental]
> sshpeer.advertise-v2 = true
> sshserver.support-v2 = true
> EOF
Helper function to run protocol tests against multiple protocol versions.
This is easier than using #testcases because managing differences between
protocols with inline conditional output is hard to read.
$ debugwireproto() {
> commands=`cat -`
> echo 'testing ssh1'
> echo "${commands}" | hg --verbose debugwireproto --localssh
> echo ""
> echo 'testing ssh2'
> echo "${commands}" | HGRCPATH=$TESTTMP/hgrc-sshv2 hg --verbose debugwireproto --localssh
> }
$ cat >> $HGRCPATH << EOF
> [ui]
> ssh = "$PYTHON" "$TESTDIR/dummyssh"
> [devel]
> debug.peer-request = true
> [extensions]
> sshprotoext = $TESTDIR/sshprotoext.py
> EOF
$ hg init server
$ cd server
$ echo 0 > foo
$ hg -q add foo
$ hg commit -m initial
A no-op connection performs a handshake
$ hg debugwireproto --localssh << EOF
> EOF
creating ssh peer from handshake results
Raw peers don't perform any activity
$ hg debugwireproto --localssh --peer raw << EOF
> EOF
using raw connection to peer
$ hg debugwireproto --localssh --peer ssh1 << EOF
> EOF
creating ssh peer for wire protocol version 1
$ hg debugwireproto --localssh --peer ssh2 << EOF
> EOF
creating ssh peer for wire protocol version 2
Test a normal behaving server, for sanity
$ cd ..
$ hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 427
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Server should answer the "hello" command in isolation
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
`hg debugserve --sshstdio` works
$ cd server
$ hg debugserve --sshstdio << EOF
> hello
> EOF
427
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
I/O logging works
$ hg debugserve --sshstdio --logiofd 1 << EOF
> hello
> EOF
o> write(4) -> 4:
o> 427\n
o> write(427) -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
427
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> flush() -> None
$ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF
> hello
> EOF
427
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
$ cat $TESTTMP/io
o> write(4) -> 4:
o> 427\n
o> write(427) -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> flush() -> None
$ cd ..
>=0.9.1 clients send a "hello" + "between" for the null range as part of handshake.
Server should reply with capabilities and should send "1\n\n" as a successful
reply with empty response to the "between".
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
SSH banner is not printed by default, ignored by clients
$ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server
url: ssh://user@dummy/server
local: no
pushable: yes
--debug will print the banner
$ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: banner: line 0
remote: banner: line 1
remote: banner: line 2
remote: banner: line 3
remote: banner: line 4
remote: banner: line 5
remote: banner: line 6
remote: banner: line 7
remote: banner: line 8
remote: banner: line 9
remote: 427
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
And test the banner with the raw protocol
$ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 15:
o> banner: line 0\n
o> readline() -> 15:
o> banner: line 1\n
o> readline() -> 15:
o> banner: line 2\n
o> readline() -> 15:
o> banner: line 3\n
o> readline() -> 15:
o> banner: line 4\n
o> readline() -> 15:
o> banner: line 5\n
o> readline() -> 15:
o> banner: line 6\n
o> readline() -> 15:
o> banner: line 7\n
o> readline() -> 15:
o> banner: line 8\n
o> readline() -> 15:
o> banner: line 9\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Connecting to a <0.9.1 server that doesn't support the hello command.
The client should refuse, as we dropped support for connecting to such
servers.
$ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 1
abort: no suitable response from remote hg!
[255]
Sending an unknown command to the server results in an empty response to that command
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> pre-hello\n
> readline
> raw
> hello\n
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(10) -> 10:
i> pre-hello\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending no-args command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 427
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send multiple unknown commands before hello
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> unknown1\n
> readline
> raw
> unknown2\n
> readline
> raw
> unknown3\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(9) -> 9:
i> unknown1\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown2\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown3\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending unknown1 command
sending unknown2 command
sending unknown3 command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 0
remote: 0
remote: 427
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send an unknown command before hello that has arguments
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> with-args\n
> foo 13\n
> value for foo\n
> bar 13\n
> value for bar\n
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(52) -> 52:
i> with-args\n
i> foo 13\n
i> value for foo\n
i> bar 13\n
i> value for bar\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command having an argument that looks numeric
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 0\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 1\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 1\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
When sending a dict argument value, it is serialized to
"<arg> <item count>" followed by "<key> <len>\n<value>" for each item
in the dict.
Dictionary value for unknown command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> key2 3\n
> bar\n
> key3 3\n
> baz\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(48) -> 48:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
i> key2 3\n
i> bar\n
i> key3 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
Incomplete dictionary send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(26) -> 26:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Incomplete value send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> fo
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(24) -> 24:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> fo
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Send a command line with spaces
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown withspace\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(18) -> 18:
i> unknown withspace\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with multiple spaces\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> EOF
using raw connection to peer
i> write(29) -> 29:
i> unknown with multiple spaces\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with spaces\n
> key 10\n
> some value\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(38) -> 38:
i> unknown with spaces\n
i> key 10\n
i> some value\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command after the "between"
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(105) -> 105:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
And one with arguments
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> raw
> unknown\n
> foo 5\n
> \nvalue\n
> bar 3\n
> baz\n
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
i> write(31) -> 31:
i> unknown\n
i> foo 5\n
i> \n
i> value\n
i> bar 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 0:
Send a valid command before the handshake
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
And a variation that doesn't send the between command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> 427\n
Send an upgrade request to a server that doesn't support that command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
> readline
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(77) -> 77:
i> upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
o> readline() -> 2:
o> 0\n
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ cd ..
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0002 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 427
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Enable version 2 support on server. We need to do this in hgrc because we can't
use --config with `hg serve --stdio`.
$ cat >> server/.hg/hgrc << EOF
> [experimental]
> sshserver.support-v2 = true
> EOF
Send an upgrade request to a server that supports upgrade
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0002\n
o> readline() -> 4:
o> 426\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
$ cd ..
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0002 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
protocol upgraded to exp-ssh-v2-0002
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Verify the peer has capabilities
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugcapabilities ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0002 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
protocol upgraded to exp-ssh-v2-0002
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
Main capabilities:
batch
branchmap
$USUAL_BUNDLE2_CAPS$
changegroupsubset
getbundle
known
lookup
protocaps
pushkey
streamreqs=generaldelta,revlogv1
unbundle=HG10GZ,HG10BZ,HG10UN
unbundlehash
Bundle2 capabilities:
HG20
bookmarks
changegroup
01
02
digests
md5
sha1
sha512
error
abort
unsupportedcontent
pushraced
pushkey
hgtagsfnodes
listkeys
phases
heads
pushkey
remote-changegroup
http
https
rev-branch-cache
stream
v2
Command after upgrade to version 2 is processed
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0002\n
o> readline() -> 4:
o> 426\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 411\n
o> readline() -> 411:
o> capabilities: branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
Multiple upgrades is not allowed
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> raw
> upgrade another-token proto=irrelevant\n
> hello\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0002\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0002\n
o> readline() -> 4:
o> 426\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(45) -> 45:
i> upgrade another-token proto=irrelevant\n
i> hello\n
o> readline() -> 1:
o> \n
e> read(-1) -> 42:
e> cannot upgrade protocols multiple times\n
e> -\n
Malformed upgrade request line (not exactly 3 space delimited tokens)
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade\n
> readline
> EOF
using raw connection to peer
i> write(8) -> 8:
i> upgrade\n
o> readline() -> 2:
o> 0\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token\n
> readline
> EOF
using raw connection to peer
i> write(14) -> 14:
i> upgrade token\n
o> readline() -> 2:
o> 0\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token foo=bar extra-token\n
> readline
> EOF
using raw connection to peer
i> write(34) -> 34:
i> upgrade token foo=bar extra-token\n
o> readline() -> 2:
o> 0\n
Upgrade request to unsupported protocol is ignored
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=unknown1,unknown2\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(51) -> 51:
i> upgrade this-is-some-token proto=unknown1,unknown2\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Upgrade request must be followed by hello + between
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0002\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(44) -> 44:
i> upgrade token proto=exp-ssh-v2-0002\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 46:
e> malformed handshake protocol: missing hello\n
e> -\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0002\n
> hello\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(50) -> 50:
i> upgrade token proto=exp-ssh-v2-0002\n
i> hello\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 48:
e> malformed handshake protocol: missing between\n
e> -\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0002\n
> hello\n
> between\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(58) -> 58:
i> upgrade token proto=exp-ssh-v2-0002\n
i> hello\n
i> between\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 49:
e> malformed handshake protocol: missing pairs 81\n
e> -\n
Legacy commands are not exposed to version 2 of protocol
TODO re-enable these once we're back to actually using v2 commands
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command branches
> nodes 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending branches command
response:
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroup
> roots 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroup command
response:
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroupsubset
> bases 0000000000000000000000000000000000000000
> heads 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroupsubset command
response:
$ cd ..
Test listkeys for listing namespaces
$ hg init empty
$ cd empty
$ debugwireproto << EOF
> command listkeys
> namespace namespaces
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(13) -> 13:
i> namespace 10\n
i> write(10) -> 10: namespaces
i> flush() -> None
o> bufferedreadline() -> 3:
o> 30\n
o> bufferedread(30) -> 30:
o> bookmarks\t\n
o> namespaces\t\n
o> phases\t
response: {
b'bookmarks': b'',
b'namespaces': b'',
b'phases': b''
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(13) -> 13:
i> namespace 10\n
i> write(10) -> 10: namespaces
i> flush() -> None
o> bufferedreadline() -> 3:
o> 30\n
o> bufferedread(30) -> 30:
o> bookmarks\t\n
o> namespaces\t\n
o> phases\t
response: {
b'bookmarks': b'',
b'namespaces': b'',
b'phases': b''
}
$ cd ..
Test listkeys for bookmarks
$ hg init bookmarkrepo
$ cd bookmarkrepo
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ echo 1 > foo
$ hg commit -m second
With no bookmarks set
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 2:
o> 0\n
response: {}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 2:
o> 0\n
response: {}
With a single bookmark set
$ hg book -r 0 bookA
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 46\n
o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 46\n
o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
}
With multiple bookmarks set
$ hg book -r 1 bookB
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 93\n
o> bufferedread(93) -> 93:
o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 93\n
o> bufferedread(93) -> 93:
o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
}
Test pushkey for bookmarks
$ debugwireproto << EOF
> command pushkey
> namespace bookmarks
> key remote
> old
> new 68986213bd4485ea51533535e3fc9e78007a711f
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(6) -> 6:
i> key 6\n
i> write(6) -> 6: remote
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> write(7) -> 7:
i> new 40\n
i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
i> write(6) -> 6:
i> old 0\n
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(6) -> 6:
i> key 6\n
i> write(6) -> 6: remote
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> write(7) -> 7:
i> new 40\n
i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
i> write(6) -> 6:
i> old 0\n
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg bookmarks
bookA 0:68986213bd44
bookB 1:1880f3755e2e
remote 0:68986213bd44
$ cd ..
Test listkeys for phases
$ hg init phasesrepo
$ cd phasesrepo
Phases on empty repo
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Create some commits
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'head 1 commit 1'
$ echo 2 > foo
$ hg commit -m 'head 1 commit 2'
$ hg -q up 0
$ echo 1a > foo
$ hg commit -m 'head 2 commit 1'
created new head
$ echo 2a > foo
$ hg commit -m 'head 2 commit 2'
Two draft heads
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 101\n
o> bufferedread(101) -> 101:
o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 101\n
o> bufferedread(101) -> 101:
o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
Single draft head
$ hg phase --public -r 2
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 58\n
o> bufferedread(58) -> 58:
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 58\n
o> bufferedread(58) -> 58:
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
All public heads
$ hg phase --public -r 4
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Setting public phase via pushkey
$ hg phase --draft --force -r .
$ debugwireproto << EOF
> command pushkey
> namespace phases
> key 7127240a084fd9dc86fe8d1f98e26229161ec82b
> old 1
> new 0
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(7) -> 7:
i> key 40\n
i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> write(6) -> 6:
i> new 1\n
i> write(1) -> 1: 0
i> write(6) -> 6:
i> old 1\n
i> write(1) -> 1: 1
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(7) -> 7:
i> key 40\n
i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> write(6) -> 6:
i> new 1\n
i> write(1) -> 1: 0
i> write(6) -> 6:
i> old 1\n
i> write(1) -> 1: 1
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg phase .
4: public
$ cd ..
Test batching of requests
$ hg init batching
$ cd batching
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'commit 1'
$ hg -q up 0
$ echo 2 > foo
$ hg commit -m 'commit 2'
created new head
$ hg book -r 1 bookA
$ hg book -r 2 bookB
$ debugwireproto << EOF
> batchbegin
> command heads
> command listkeys
> namespace bookmarks
> command listkeys
> namespace phases
> batchsubmit
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 427\n
o> readline() -> 427:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending batch with 3 sub-commands
i> write(6) -> 6:
i> batch\n
i> write(4) -> 4:
i> * 0\n
i> write(8) -> 8:
i> cmds 61\n
i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 278\n
o> bufferedread(278) -> 278:
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
o> publishing\tTrue
response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0002\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0002\n (glob)
o> readline() -> 4:
o> 426\n
o> read(426) -> 426: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1 unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending batch with 3 sub-commands
i> write(6) -> 6:
i> batch\n
i> write(4) -> 4:
i> * 0\n
i> write(8) -> 8:
i> cmds 61\n
i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 278\n
o> bufferedread(278) -> 278:
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
o> publishing\tTrue
response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue