view tests/test-convert-bzr.t @ 51181:dcaa2df1f688

changelog: never inline changelog

The test suite mostly use small repositories, that implies that most changelog in the
tests are inlined. As a result, non-inlined changelog are quite poorly tested.
Since non-inline changelog are most common case for serious repositories, this
lack of testing is a significant problem that results in high profile issue like
the one recently fixed by 66417f55ea33 and 849745d7da89.

Inlining the changelog does not bring much to the table, the number of total
file saved is negligible, and the changelog will be read by most operation
anyway.

So this changeset is make it so we never inline the changelog, and de-inline the
one that are still inlined whenever we touch them.

By doing that, we remove the "dual code path" situation for writing new entry to
the changelog and move to a "single code path" situation. Having a single
code path simplify the code and make sure it is covered by test (if test cover
that situation obviously)


This impact all tests that care about the number of file and the exchange size,
but there is nothing too complicated in them just a lot of churn.

The churn is made "worse" by the fact rust will use the persistent nodemap on
any changelog now. Which is overall a win as it means testing the persistent
nodemap more and having less special cases.

In short, having inline changelog is mostly useless and an endless source of
pain. We get rid of it.

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ brz init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ brz add -q a c e
  $ brz commit -q -m 'Initial add: a, c, e'
  $ brz mv a b
  a => b
  $ brz mv c d
  c => d
  $ brz mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ brz add -q a e
  $ brz commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files+: [b d f], files-: [c e], files: [a]
  |
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ brz checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ brz log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from breezy import workingtree
  > import breezy.bzr.bzrdir
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ brz init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ brz add -q a b
  $ brz commit -q -m 'Initial add'
  $ cd ..
  $ brz branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ "$PYTHON" ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ "$PYTHON" ../helper.py 'Editing b' 200
  $ cd ../source
  $ brz merge -q ../source-improve
  $ brz commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files+: [], files-: [], files: []
  |\
  | o  2@source-improve "Editing b" files+: [], files-: [], files: [b]
  | |
  o |  1@source "Editing a" files+: [], files-: [], files: [a]
  |/
  o  0@source "Initial add" files+: [a b], files-: [], files: []
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ brz init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ brz add -q altname program syma d/a
  $ brz commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ brz add -q newprog
  $ brz commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ brz init-repo -q --no-trees repo
  $ brz init -q repo/trunk
  $ brz co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ brz add -q a
  $ brz ci -qm adda
  $ brz tag trunk-tag
  Created tag trunk-tag.
  $ brz switch -b branch
  Tree is up to date at revision 1.
  Switched to branch*repo/branch/ (glob)
  $ echo b > b
  $ brz add -q b
  $ brz ci -qm addb
  $ brz tag branch-tag
  Created tag branch-tag.
  $ brz switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch*/repo/trunk/ (glob)
  $ echo a >> a
  $ brz ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files+: [.hgtags], files-: [], files: []
  |
  o  2@default "changea" files+: [], files-: [], files: [a]
  |
  | o  1@branch "addb" files+: [b], files-: [], files: []
  |/
  o  0@default "adda" files+: [a], files-: [], files: []
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ brz init-repo -q --no-trees repo/inner
  $ brz init -q repo/inner/trunk
  $ brz co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ brz add -q b
  $ brz ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags