changelog: never inline changelog
The test suite mostly use small repositories, that implies that most changelog in the
tests are inlined. As a result, non-inlined changelog are quite poorly tested.
Since non-inline changelog are most common case for serious repositories, this
lack of testing is a significant problem that results in high profile issue like
the one recently fixed by
66417f55ea33 and
849745d7da89.
Inlining the changelog does not bring much to the table, the number of total
file saved is negligible, and the changelog will be read by most operation
anyway.
So this changeset is make it so we never inline the changelog, and de-inline the
one that are still inlined whenever we touch them.
By doing that, we remove the "dual code path" situation for writing new entry to
the changelog and move to a "single code path" situation. Having a single
code path simplify the code and make sure it is covered by test (if test cover
that situation obviously)
This impact all tests that care about the number of file and the exchange size,
but there is nothing too complicated in them just a lot of churn.
The churn is made "worse" by the fact rust will use the persistent nodemap on
any changelog now. Which is overall a win as it means testing the persistent
nodemap more and having less special cases.
In short, having inline changelog is mostly useless and an endless source of
pain. We get rid of it.
#require svn svn-bindings
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
$ SVNREPOPATH=`pwd`/svn-repo
$ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"
Convert trunk and branches
$ hg convert --datesort "$SVNREPOURL"/subproject A-hg
initializing destination A-hg repository
scanning source...
sorting...
converting...
13 createtrunk
12 moved1
11 moved1
10 moved2
9 changeb and rm d2
8 changeb and rm d2
7 moved1again
6 moved1again
5 copyfilefrompast
4 copydirfrompast
3 add d3
2 copy dir and remove subdir
1 add d4old
0 rename d4old into d4new
$ cd A-hg
$ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
o 13 rename d4old into d4new files: d4new/g d4old/g
|
o 12 add d4old files: d4old/g
|
o 11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
|
o 10 add d3 files: d3/d31/e d3/f
|
o 9 copydirfrompast files: d2/d
|
o 8 copyfilefrompast files: d
|
o 7 moved1again files: d1/b d1/c
|
| o 6 moved1again files:
| |
o | 5 changeb and rm d2 files: d1/b d2/d
| |
| o 4 changeb and rm d2 files: b
| |
o | 3 moved2 files: d2/d
| |
o | 2 moved1 files: d1/b d1/c
| |
| o 1 moved1 files: b c
|
o 0 createtrunk files:
Check move copy records
$ hg st --rev 12:13 --copies
A d4new/g
d4old/g
R d4old/g
Check branches
$ hg branches
default 13:* (glob)
d1 6:* (glob)
$ cd ..
$ mkdir test-replace
$ cd test-replace
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"
Convert files being replaced by directories
$ hg convert svn-repo hg-repo
initializing destination hg-repo repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd hg-repo
Manifest before
$ hg -v manifest -r 1
644 a
644 d/b
644 d2/a
644 @ dlink
644 @ dlink2
644 dlink3
Manifest after clobber1
$ hg -v manifest -r 2
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 dlink3
Manifest after clobber2
$ hg -v manifest -r 3
644 a/b
644 d/b
644 d2/a
644 dlink/b
644 @ dlink2
644 @ dlink3
Manifest after clobberdir
$ hg -v manifest -r 6
644 a/b
644 d/b
644 d2/a
644 d2/c
644 dlink/b
644 @ dlink2
644 @ dlink3
Try updating
$ hg up -qC default
$ cd ..
Test convert progress bar
$ cat >> $HGRCPATH <<EOF
> [progress]
> assume-tty = 1
> delay = 0
> changedelay = 0
> format = topic bar number
> refresh = 0
> width = 60
> EOF
$ hg convert svn-repo hg-progress
\r (no-eol) (esc)
scanning [=====> ] 1/7\r (no-eol) (esc)
scanning [===========> ] 2/7\r (no-eol) (esc)
scanning [=================> ] 3/7\r (no-eol) (esc)
scanning [========================> ] 4/7\r (no-eol) (esc)
scanning [==============================> ] 5/7\r (no-eol) (esc)
scanning [====================================> ] 6/7\r (no-eol) (esc)
scanning [===========================================>] 7/7\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [ ] 0/7\r (no-eol) (esc)
getting files [=====> ] 1/6\r (no-eol) (esc)
getting files [============> ] 2/6\r (no-eol) (esc)
getting files [==================> ] 3/6\r (no-eol) (esc)
getting files [=========================> ] 4/6\r (no-eol) (esc)
getting files [===============================> ] 5/6\r (no-eol) (esc)
getting files [======================================>] 6/6\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=====> ] 1/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===========> ] 2/7\r (no-eol) (esc)
scanning paths [ ] 0/2\r (no-eol) (esc)
scanning paths [==================> ] 1/2\r (no-eol) (esc)
getting files [========> ] 1/4\r (no-eol) (esc)
getting files [==================> ] 2/4\r (no-eol) (esc)
getting files [============================> ] 3/4\r (no-eol) (esc)
getting files [======================================>] 4/4\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=================> ] 3/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=======================> ] 4/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [======================================>] 1/1\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [=============================> ] 5/7\r (no-eol) (esc)
scanning paths [ ] 0/1\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
\r (no-eol) (esc)
converting [===================================> ] 6/7\r (no-eol) (esc)
scanning paths [ ] 0/3\r (no-eol) (esc)
scanning paths [===========> ] 1/3\r (no-eol) (esc)
scanning paths [========================> ] 2/3\r (no-eol) (esc)
getting files [===> ] 1/8\r (no-eol) (esc)
getting files [========> ] 2/8\r (no-eol) (esc)
getting files [=============> ] 3/8\r (no-eol) (esc)
getting files [==================> ] 4/8\r (no-eol) (esc)
getting files [=======================> ] 5/8\r (no-eol) (esc)
getting files [============================> ] 6/8\r (no-eol) (esc)
getting files [=================================> ] 7/8\r (no-eol) (esc)
getting files [======================================>] 8/8\r (no-eol) (esc)
\r (no-eol) (esc)
initializing destination hg-progress repository
scanning source...
sorting...
converting...
6 initial
5 clobber symlink
4 clobber1
3 clobber2
2 adddb
1 clobberdir
0 branch
$ cd ..