view tests/test-exchange-obsmarkers-case-B2.t @ 51181:dcaa2df1f688

changelog: never inline changelog

The test suite mostly use small repositories, that implies that most changelog in the
tests are inlined. As a result, non-inlined changelog are quite poorly tested.
Since non-inline changelog are most common case for serious repositories, this
lack of testing is a significant problem that results in high profile issue like
the one recently fixed by 66417f55ea33 and 849745d7da89.

Inlining the changelog does not bring much to the table, the number of total
file saved is negligible, and the changelog will be read by most operation
anyway.

So this changeset is make it so we never inline the changelog, and de-inline the
one that are still inlined whenever we touch them.

By doing that, we remove the "dual code path" situation for writing new entry to
the changelog and move to a "single code path" situation. Having a single
code path simplify the code and make sure it is covered by test (if test cover
that situation obviously)


This impact all tests that care about the number of file and the exchange size,
but there is nothing too complicated in them just a lot of churn.

The churn is made "worse" by the fact rust will use the persistent nodemap on
any changelog now. Which is overall a win as it means testing the persistent
nodemap more and having less special cases.

In short, having inline changelog is mostly useless and an endless source of
pain. We get rid of it.

============================================
Testing obsolescence markers push: Cases B.2
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 2: Prune on targeted common changeset
Variants:
# a: explicite push
# b: bare push

B.2 Pruned changeset on head: nothing pushed
============================================

.. {{{
..     ⊗ A
..     |
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * A (prune)
..
.. Command run:
..
..  * hg push -r O
..  * hg push
..
.. Expected exchange:
..
..  * prune marker for A

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos B.2
  creating test repo for test case B.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f5bc6836db60 (draft): A
  |
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R B.2 B.2.a
  $ cp -R B.2 B.2.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest B.2.a O
  ## Running testcase B.2.a
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-----------------------------------

  $ dotest B.2.b
  ## Running testcase B.2.b
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}