view hgext/pager.py @ 27764:dd0c5f4d1b53

util: adjust 'datapath' to be correct in a frozen OS X package

Apparently unlike py2exe, py2app copies the Mercurial source tree as-is to a
Contents/Resources subdirectory of an app bundle, and places its binary stub in
Contents/MacOS.  (The Windows install has the 'hgext' and 'mercurial' modules in
'lib/library.zip', while the help and templates subdirectories have been moved
out of the mercurial directory to the root of the installation.  I assume that
the python code living in a zip file is why "py2exe doesn't support __file__".)
Therefore, prior to this change, Mercurial in a frozen app bundle on OS X would
go looking for help *.txt, templates and locale info in Contents/MacOS, where
they don't exist.

There are only a handful of places that test for frozen, and not all of them are
wrong for OS X, so it seems wiser to handle them on a case by case basis, rather
that try to change mainfrozen().  The remaining cases are:

  1) util.hgexecutable() wrongly points to the bundled python executable, and
       affects $HG in util.system() launched processes (e.g. external hooks)
  2) util.hgcmd() wrongly points to the bundled python executable, but it seems
       to only affect 'hg serve -d'
  3) hook._pythonhook() may be OK, since I didn't see anything outrageous when
       printing sys.path from an internal hook.  I'm not sure if this special
       case is needed on OS X though.
  4) sslutil._plainapplepython() is OK, because sys.executable is not
       /usr/bin/python, nor is it in /System/Library/Frameworks

# pager.py - display output using a pager
#
# Copyright 2008 David Soria Parra <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#
# To load the extension, add it to your configuration file:
#
#   [extension]
#   pager =
#
# Run "hg help pager" to get info on configuration.

'''browse command output with an external pager

To set the pager that should be used, set the application variable::

  [pager]
  pager = less -FRX

If no pager is set, the pager extensions uses the environment variable
$PAGER. If neither pager.pager, nor $PAGER is set, no pager is used.

You can disable the pager for certain commands by adding them to the
pager.ignore list::

  [pager]
  ignore = version, help, update

You can also enable the pager only for certain commands using
pager.attend. Below is the default list of commands to be paged::

  [pager]
  attend = annotate, cat, diff, export, glog, log, qdiff

Setting pager.attend to an empty value will cause all commands to be
paged.

If pager.attend is present, pager.ignore will be ignored.

Lastly, you can enable and disable paging for individual commands with
the attend-<command> option. This setting takes precedence over
existing attend and ignore options and defaults::

  [pager]
  attend-cat = false

To ignore global commands like :hg:`version` or :hg:`help`, you have
to specify them in your user configuration file.

To control whether the pager is used at all for an individual command,
you can use --pager=<value>::

  - use as needed: `auto`.
  - require the pager: `yes` or `on`.
  - suppress the pager: `no` or `off` (any unrecognized value
  will also work).

'''

import atexit, sys, os, signal, subprocess
from mercurial import commands, dispatch, util, extensions, cmdutil
from mercurial.i18n import _

# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'

def _runpager(ui, p):
    pager = subprocess.Popen(p, shell=True, bufsize=-1,
                             close_fds=util.closefds, stdin=subprocess.PIPE,
                             stdout=sys.stdout, stderr=sys.stderr)

    # back up original file objects and descriptors
    olduifout = ui.fout
    oldstdout = sys.stdout
    stdoutfd = os.dup(sys.stdout.fileno())
    stderrfd = os.dup(sys.stderr.fileno())

    # create new line-buffered stdout so that output can show up immediately
    ui.fout = sys.stdout = newstdout = os.fdopen(sys.stdout.fileno(), 'wb', 1)
    os.dup2(pager.stdin.fileno(), sys.stdout.fileno())
    if ui._isatty(sys.stderr):
        os.dup2(pager.stdin.fileno(), sys.stderr.fileno())

    @atexit.register
    def killpager():
        if util.safehasattr(signal, "SIGINT"):
            signal.signal(signal.SIGINT, signal.SIG_IGN)
        pager.stdin.close()
        ui.fout = olduifout
        sys.stdout = oldstdout
        # close new stdout while it's associated with pager; otherwise stdout
        # fd would be closed when newstdout is deleted
        newstdout.close()
        # restore original fds: stdout is open again
        os.dup2(stdoutfd, sys.stdout.fileno())
        os.dup2(stderrfd, sys.stderr.fileno())
        pager.wait()

def uisetup(ui):
    if '--debugger' in sys.argv or not ui.formatted():
        return

    def pagecmd(orig, ui, options, cmd, cmdfunc):
        p = ui.config("pager", "pager", os.environ.get("PAGER"))
        usepager = False
        always = util.parsebool(options['pager'])
        auto = options['pager'] == 'auto'

        if not p:
            pass
        elif always:
            usepager = True
        elif not auto:
            usepager = False
        else:
            attend = ui.configlist('pager', 'attend', attended)
            ignore = ui.configlist('pager', 'ignore')
            cmds, _ = cmdutil.findcmd(cmd, commands.table)

            for cmd in cmds:
                var = 'attend-%s' % cmd
                if ui.config('pager', var):
                    usepager = ui.configbool('pager', var)
                    break
                if (cmd in attend or
                     (cmd not in ignore and not attend)):
                    usepager = True
                    break

        setattr(ui, 'pageractive', usepager)

        if usepager:
            ui.setconfig('ui', 'formatted', ui.formatted(), 'pager')
            ui.setconfig('ui', 'interactive', False, 'pager')
            if util.safehasattr(signal, "SIGPIPE"):
                signal.signal(signal.SIGPIPE, signal.SIG_DFL)
            _runpager(ui, p)
        return orig(ui, options, cmd, cmdfunc)

    # Wrap dispatch._runcommand after color is loaded so color can see
    # ui.pageractive. Otherwise, if we loaded first, color's wrapped
    # dispatch._runcommand would run without having access to ui.pageractive.
    def afterloaded(loaded):
        extensions.wrapfunction(dispatch, '_runcommand', pagecmd)
    extensions.afterloaded('color', afterloaded)

def extsetup(ui):
    commands.globalopts.append(
        ('', 'pager', 'auto',
         _("when to paginate (boolean, always, auto, or never)"),
         _('TYPE')))

attended = ['annotate', 'cat', 'diff', 'export', 'glog', 'log', 'qdiff']