view tests/test-import-merge.t @ 51576:de5bf3fe0233

revset: stop serializing node when using "%ln"

Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?

In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".

This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.

Here are some relevant poulpe benchmarks:

### data-env-vars.name                             = mozilla-try-2023-03-22-zstd-sparse-revlog
  # benchmark.name                                 = hg.command.push
  # bin-env-vars.hg.flavor                         = default
  # bin-env-vars.hg.py-re2-module                  = default
  # benchmark.variants.explicit-rev                = all-out-heads
  # benchmark.variants.issue6528                   = disabled
  # benchmark.variants.protocol                    = ssh
  # benchmark.variants.reuse-external-delta-parent = default

 ## benchmark.variants.revs                        = any-1-extra-rev
before: 44.235070
after:  20.416329 (-53.85%, -23.82)
 ## benchmark.variants.revs                        = any-100-extra-rev
before: 49.234697
after:  26.519829 (-46.14%, -22.71)



### benchmark.name                = hg.command.bundle
  # bin-env-vars.hg.flavor        = default
  # bin-env-vars.hg.py-re2-module = default
  # benchmark.variants.revs       = all
  # benchmark.variants.type       = none-streamv2
 ## data-env-vars.name            = heptapod-public-2024-03-25-zstd-sparse-revlog
before:  10.138396
after:    7.750458  (-23.55%, -2.39)
 ## data-env-vars.name            = mercurial-public-2024-03-22-zstd-sparse-revlog
before:   1.263859
after:    0.700229  (-44.60%, -0.56)
 ## data-env-vars.name            = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after:  346.5089 (-13.26%, -52.98)
 ## data-env-vars.name            = pypy-2024-03-22-zstd-sparse-revlog
before:   4.540080
after:    3.401700  (-25.07%, -1.14)
 ## data-env-vars.name            = tryton-public-2024-03-22-zstd-sparse-revlog
before:   2.975765
after:    1.870798  (-37.13%, -1.10)

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ tipparents() {
  > hg parents --template "{rev}:{node|short} {desc|firstline}\n" -r tip
  > }

Test import and merge diffs

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg ci -m changea
  $ echo c > c
  $ hg ci -Am addc
  adding c
  $ hg up 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > b
  $ hg ci -Am addb
  adding b
  created new head
  $ hg up 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m merge
  $ hg export . > ../merge.diff
  $ grep -v '^merge$' ../merge.diff > ../merge.nomsg.diff
  $ cd ..
  $ hg clone -r2 repo repo2
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files
  new changesets 07f494440405:890ecaa90481
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd repo2
  $ hg pull -r3 ../repo
  pulling from ../repo
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 102a90ea7b4a
  (run 'hg heads' to see heads, 'hg merge' to merge)

Test without --exact and diff.p1 == workingdir.p1

  $ hg up 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ cat > $TESTTMP/editor.sh <<EOF
  > env | grep HGEDITFORM
  > echo merge > \$1
  > EOF
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg import --edit ../merge.nomsg.diff
  applying ../merge.nomsg.diff
  HGEDITFORM=import.normal.merge
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test without --exact and diff.p1 != workingdir.p1

  $ hg up 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import ../merge.diff
  applying ../merge.diff
  warning: import the patch as a normal revision
  (use --exact to import the patch as a merge)
  $ tipparents
  2:890ecaa90481 addc
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test with --exact

  $ hg import --exact ../merge.diff
  applying ../merge.diff
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test with --bypass and diff.p1 == workingdir.p1

  $ hg up 1
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import --bypass ../merge.diff
  applying ../merge.diff
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip

Test with --bypass and diff.p1 != workingdir.p1

  $ hg up 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg import --bypass ../merge.diff
  applying ../merge.diff
  warning: import the patch as a normal revision
  (use --exact to import the patch as a merge)
  $ tipparents
  2:890ecaa90481 addc
  $ hg strip --no-backup tip

Test with --bypass and --exact

  $ hg import --bypass --exact ../merge.diff
  applying ../merge.diff
  $ tipparents
  1:540395c44225 changea
  3:102a90ea7b4a addb
  $ hg strip --no-backup tip

  $ cd ..

Test that --exact on a bad header doesn't corrupt the repo (issue3616)

  $ hg init repo3
  $ cd repo3
  $ echo a>a
  $ hg ci -Aqm0
  $ echo a>>a
  $ hg ci -m1
  $ echo a>>a
  $ hg ci -m2
  $ echo a>a
  $ echo b>>a
  $ echo a>>a
  $ hg ci -m3
  $ hg export 2 | head -7 > ../a.patch
  $ hg export tip > out
  >>> apatch = open("../a.patch", "ab")
  >>> apatch.write(b"".join(open("out", 'rb').readlines()[7:])) and None

  $ cd ..
  $ hg clone -qr0 repo3 repo3-clone
  $ cd repo3-clone
  $ hg pull -qr1 ../repo3

  $ hg import --exact ../a.patch
  applying ../a.patch
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  patching file a
  Hunk #1 succeeded at 1 with fuzz 1 (offset -1 lines).
  transaction abort!
  rollback completed
  abort: patch is damaged or loses information
  [255]
  $ hg verify -q