hardlink: check directory's st_dev when copying files
Previously, when copying a file, copyfiles will compare src's st_dev with
dirname(dst)'s st_dev, to decide whether to enable hardlink or not.
That could have issues on Linux's overlayfs, where stating directories could
result in different st_dev from st_dev of stating files, even if both the
directories and the files exist in the overlay's upperdir.
This patch fixes it by checking dirname(src) instead. It's more consistent
because we are checking directories for both src and dest.
That fixes test-hardlinks.t running on common Docker setups.
setup
$ cat >> $HGRCPATH <<EOF
> [extensions]
> blackbox=
> mock=$TESTDIR/mockblackbox.py
> mq=
> [alias]
> confuse = log --limit 3
> EOF
$ hg init blackboxtest
$ cd blackboxtest
command, exit codes, and duration
$ echo a > a
$ hg add a
$ hg blackbox --config blackbox.dirty=True
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox
alias expansion is logged
$ hg confuse
$ hg blackbox
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox --config 'blackbox.dirty=True' exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> confuse
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> alias 'confuse' expands to 'log --limit 3'
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> confuse exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> blackbox
incoming change tracking
create two heads to verify that we only see one change in the log later
$ hg commit -ma
$ hg up null
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo b > b
$ hg commit -Amb
adding b
created new head
clone, commit, pull
$ hg clone . ../blackboxtest2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo c > c
$ hg commit -Amc
adding c
$ cd ../blackboxtest2
$ hg pull
pulling from $TESTTMP/blackboxtest (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
(run 'hg update' to get a working copy)
$ hg blackbox -l 6
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pull
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> updated served branch cache in * seconds (glob)
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> wrote served branch cache with 1 labels and 2 nodes
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> 1 incoming changes - new heads: d02f48003e62
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pull exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> blackbox -l 6
we must not cause a failure if we cannot write to the log
$ hg rollback
repository tip rolled back to revision 1 (undo pull)
$ mv .hg/blackbox.log .hg/blackbox.log-
$ mkdir .hg/blackbox.log
$ hg --debug incoming
warning: cannot write to blackbox.log: * (glob)
comparing with $TESTTMP/blackboxtest (glob)
query 1; heads
searching for changes
all local heads known remotely
changeset: 2:d02f48003e62c24e2659d97d30f2a83abe5d5d51
tag: tip
phase: draft
parent: 1:6563da9dcf87b1949716e38ff3e3dfaa3198eb06
parent: -1:0000000000000000000000000000000000000000
manifest: 2:ab9d46b053ebf45b7996f2922b9893ff4b63d892
user: test
date: Thu Jan 01 00:00:00 1970 +0000
files+: c
extra: branch=default
description:
c
$ hg pull
pulling from $TESTTMP/blackboxtest (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
(run 'hg update' to get a working copy)
a failure reading from the log is fatal
$ hg blackbox -l 3
abort: *$TESTTMP/blackboxtest2/.hg/blackbox.log* (glob)
[255]
$ rmdir .hg/blackbox.log
$ mv .hg/blackbox.log- .hg/blackbox.log
backup bundles get logged
$ touch d
$ hg commit -Amd
adding d
created new head
$ hg strip tip
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
$ hg blackbox -l 6
1970/01/01 00:00:00 bob @73f6ee326b27d820b0472f1a825e3a50f3dc489b (5000)> strip tip
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/73f6ee326b27-7612e004-backup.hg (glob)
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> updated base branch cache in * seconds (glob)
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> wrote base branch cache with 1 labels and 2 nodes
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> strip tip exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> blackbox -l 6
extension and python hooks - use the eol extension for a pythonhook
$ echo '[extensions]' >> .hg/hgrc
$ echo 'eol=' >> .hg/hgrc
$ echo '[hooks]' >> .hg/hgrc
$ echo 'update = echo hooked' >> .hg/hgrc
$ hg update
hooked
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
1 other heads for branch "default"
$ hg blackbox -l 6
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> update
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> writing .hg/cache/tags2-visible with 0 tags
1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pythonhook-preupdate: hgext.eol.preupdate finished in * seconds (glob)
1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> exthook-update: echo hooked finished in * seconds (glob)
1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> update exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> blackbox -l 6
log rotation
$ echo '[blackbox]' >> .hg/hgrc
$ echo 'maxsize = 20 b' >> .hg/hgrc
$ echo 'maxfiles = 3' >> .hg/hgrc
$ hg status
$ hg status
$ hg status
$ hg tip -q
2:d02f48003e62
$ ls .hg/blackbox.log*
.hg/blackbox.log
.hg/blackbox.log.1
.hg/blackbox.log.2
$ cd ..
$ hg init blackboxtest3
$ cd blackboxtest3
$ hg blackbox
1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> blackbox
$ mv .hg/blackbox.log .hg/blackbox.log-
$ mkdir .hg/blackbox.log
$ sed -e 's/\(.*test1.*\)/#\1/; s#\(.*commit2.*\)#os.rmdir(".hg/blackbox.log")\
> os.rename(".hg/blackbox.log-", ".hg/blackbox.log")\
> \1#' $TESTDIR/test-dispatch.py > ../test-dispatch.py
$ python $TESTDIR/blackbox-readonly-dispatch.py
running: add foo
result: 0
running: commit -m commit1 -d 2000-01-01 foo
result: None
running: commit -m commit2 -d 2000-01-02 foo
result: None
running: log -r 0
changeset: 0:0e4634943879
user: test
date: Sat Jan 01 00:00:00 2000 +0000
summary: commit1
result: None
running: log -r tip
changeset: 1:45589e459b2e
tag: tip
user: test
date: Sun Jan 02 00:00:00 2000 +0000
summary: commit2
result: None
$ hg blackbox
1970/01/01 00:00:00 bob @0e46349438790c460c5c9f7546bfcd39b267bbd2 (5000)> commit -m commit2 -d 2000-01-02 foo
1970/01/01 00:00:00 bob @0e46349438790c460c5c9f7546bfcd39b267bbd2 (5000)> updated served branch cache in * seconds (glob)
1970/01/01 00:00:00 bob @0e46349438790c460c5c9f7546bfcd39b267bbd2 (5000)> wrote served branch cache with 1 labels and 1 nodes
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> commit -m commit2 -d 2000-01-02 foo exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r 0
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> writing .hg/cache/tags2-visible with 0 tags
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r 0 exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r tip
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r tip exited 0 after * seconds (glob)
1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> blackbox
Test log recursion from dirty status check
$ cat > ../r.py <<EOF
> from mercurial import context, error, extensions
> x=[False]
> def status(orig, *args, **opts):
> args[0].repo().ui.log("broken", "recursion?")
> return orig(*args, **opts)
> def reposetup(ui, repo):
> extensions.wrapfunction(context.basectx, 'status', status)
> EOF
$ hg id --config extensions.x=../r.py --config blackbox.dirty=True
45589e459b2e tip
cleanup
$ cd ..