view tests/test-wireproto.t @ 40572:def08813b290

tests: remove obsolete PYTHONPATH override from remotefilelog tests They were added in https://bitbucket.org/facebook/hg-experimental/commits/fdcad37a6a68cfbaf5920f3eeaa0cc9cae42bd26, which says this: When remotefilelog moved from its own repo, the tests needed to be updated to adjust the PYTHONPATH to ensure the in-repo remotefilelog was loaded instead of the system one. This meant any local runs of remotefilelog tests would've been using the system remotefilelog unless the user had manually set the PYTHONPATH themselves. That doesn't seem relevant with remotefilelog in core. Differential Revision: https://phab.mercurial-scm.org/D5248
author Martin von Zweigbergk <martinvonz@google.com>
date Fri, 09 Nov 2018 09:27:37 -0800
parents b4b7427b5786
children 9c4204b7f3e4
line wrap: on
line source

Test wire protocol argument passing

Setup repo:

  $ hg init repo

Local:

  $ hg debugwireargs repo eins zwei --three drei --four vier
  eins zwei drei vier None
  $ hg debugwireargs repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs repo eins zwei
  eins zwei None None None
  $ hg debugwireargs repo eins zwei --five fuenf
  eins zwei None None fuenf

HTTP:

  $ hg  serve -R repo -p $HGPORT -d --pid-file=hg1.pid \
  >   -E error.log -A access.log \
  >   --config experimental.httppostargs=yes
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)

HTTP without args-in-POST:
  $ hg serve -R repo -p $HGPORT1 -d --pid-file=hg1.pid -E error.log -A access.log
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT1/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT1/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT1/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)

HTTP without the httpheader capability:

  $ CAP=httpheader . "$TESTDIR/notcapable"

  $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
  $ cat hg2.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
  eins zwei None None None
  $ cat error2.log
  $ cat access2.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)

SSH (try to exercise the ssh functionality with a dummy script):

  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro
  uno due tre quattro None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei
  eins zwei None None None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
  eins zwei None None None

Explicitly kill daemons to let the test exit on Windows

  $ killdaemons.py